20 Most Recent Schlage BE365-PLY BE365PLY626 Satin Chrome Electronic Security Keypad Elect - Page 5 Questions & Answers


The spanner tool that Schlage includes with many of their new locks will work on the old ones. Search Google images for "schlage spanner wrench" and you'll see different styles, but they all can be made to work. You remove the inside knob (or lever handle, but let's say it's a knob) by sticking the pin end (or a straightened out large paperclip) into the hole in the knob towards the edge of the door and press in the springy retainer. While pressing in the retainer, pull the knob away from the door. If the pin is all the way in, the knob won't move away more than about 3/32", so after it starts moving, remove the pin and the knob should come off the rest of the way. If the inside knob has a keyhole, then you need to turn the key about 90 degrees, or as far as it will go, before the retainer will move. If you don't have a key, then pick it, or drill the pins so it will turn. If you don't care what happens to the old lock because you are going to replace it, you can cut off the inner knob with a hacksaw. Cut as close to the rose as possible. Once you have the knob off, use the spanner to remove the inside rose trim, and then pull the lock out of the door from the outside.

Schlage Locks &... | Answered on Oct 23, 2017


Things to try:
1. Lubricate the lock. If you think the lock is clean (not exposed to dust, rust, rain, or anything else except keys in the keyhole) then lubricate it with powdered graphite, available from most hardware stores and locksmiths. If it isn't clean, then try a shot of a lubricant that can clean it out. The cheapest is WD-40, but there are many people willing to sell you more expensive products that do the same thing that they will claim to have extra benefits. Spray it into the keyhole with a bunch of paper towels or a rag underneath to catch the stuff that comes out until it runs out clear. Try the key, and if it works, great! If not, then move on to the next step:

2. Check your key. Have you used the same key every day for 10 years? Is it worn? Is it bent or twisted? Do you have another copy that works better? If this is the only key with problems, then stop using it. Get copies made from the one that works the best, and discard the bad ones. Ideally, when you get a new lock (or car) you should make copies to use, and save the originals where you can find them again so you can make fresh copies in the future. (For a new car, copies of the electronic keys may seem expensive, but it sure beats the cost of having a locksmith fit a key to your car after you've lost both originals.)

3. If none of the above worked, your lock is probably worn. You can take the lock to a locksmith and have the pin tumblers inside replaced, or set up to work with a factory new key, but that won't replace other worn parts in the lock. You probably replaced your worn out cell phone more than twice in the last ten years, and all you did to that was press buttons on it, not stick a piece of metal in and out of it daily, slam it again and again, and expect it to protect your property and the lives of yourself and your loved ones. (Maybe you should not only replace it with the same kind, but a stronger one!)

Schlage Locks &... | Answered on Oct 23, 2017


Any locksmith can do it,BUT- if you go to hardware store you can find locks that have a number on the front of the box that says something like 'TypeA, or Type B' If you purchase the same lock type with the same number or letter, they will all use the same keys included. It's much cheaper than a locksmith.

Schlage Locks &... | Answered on May 06, 2017


Push the know back on and use the key to open the door. Then refix the knobs using an allen key on the screws.

Schlage Locks &... | Answered on Jan 04, 2017


FIXYA DOESNT HAVE ACCESS TO YOUR PRIVATE CODES OR CODE S FROM ANOTHER COMPANY EITHER CAN NOTIFY A LOCKSMITH OR MANUFACTURER

Schlage Locks &... | Answered on Dec 09, 2016


Emergency Key Override.

If you are daft enough to keep the emergency keys on the room locked by the keypad, you need a locksmith and a pik set or pik gun. :>) Lesson learned.

Are you able to push the pins out on the hinges?

Here is the manual anyway.
http://consumer.schlage.com/project%20documents/23780042%20fe%20and%20be-series%20user%20guide-a_web.pdf

Schlage Locks &... | Answered on Nov 27, 2016


Take it back and ask the seller of the device.

Schlage Locks &... | Answered on Nov 17, 2016

Not finding what you are looking for?
Schlage BE365-PLY  BE365PLY626 Satin Chrome Electronic Security Keypad Elect Logo

62 questions posted

Ask a Question

Usually answered in minutes!

Top Schlage Locks & Locksmithing Experts

JOHN LAPIER

Level 3 Expert

2601 Answers

Mike

Level 3 Expert

4369 Answers

Cindy Wells

Level 3 Expert

6169 Answers

Are you a Schlage Lock and Locksmithing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Schlage Locks & Locksmithing

  • Schlage Locks & Locksmithing

Most Popular Question

when press schlage button door

  • Locks & Locksmithing
Loading...