Deadbolt Zurich Digital Keyless Remote Control Lock Brass-WITH REMOTE - Answered Questions & Fixed issues

Le code maitre est "0123". Poussez que, puis "S". Entrez un nouveau code. Il doit commencer par "0". Saisissez le nouveau code, appuyez sur "On".

http://www.audioreaction.com/Manuals/RS725LCD%20Operation%20Manual.pdfA note about PDF files: If you cannot view a given file, you need to first install Adobe Reader. You can get the free download here:http://get.adobe.com/reader/Good luck!

You can't add a second nip.

I've located a number that you can call for RONA customer service:

1-866-283-2239
8 a.m. to 8 p.m. (Eastern Time)
Monday to Friday

I believe this is the link to RONA where you find your lock featured for sale:

http://www.rona.ca/shop/~deadbolt-digital-deadbolt-rona-collection-253947_locksmithing-accessories_rona-product-line_shop

Unfortunately, there is no downloadable instruction manual to download, ETC., so call the number and begin the process--I hope you get an answer without too much telephone runaround!

Good luck!--and please give feedback if this helps you toward a solution.

I have been searched unsuccessfully for "Zurich deadbolt keyless remote" in order to help you. However, if the picture shown in your request is accurate for your lock, I have found some information which may be useful to you!
The brand that I found is Lockstate, which looks like the lockset pictured. Go to this webpage (copy & paste into your browser search window):

http://www.lockstate.com/manuals-and-downloads.html?start=10

Go to the bottom of that page, to "LOCK LS-DBS" and click on Download. This will download a PDF file of the installation and programming instructions.

If you cannot open and view the download, you will need to download and install Adobe Reader. You can get it here:

http://get.adobe.com/reader/

If this is not the correct information for your lock, please re-submit the problem and I'll try again. Any further model info, etc., will be helpful.

Good luck--and please provide feedback if this helps!

The lock's fingerprint recognition technology has a failure rate of 1 in 1 million - far lower than an old fashion 5 lever mortice lock. You'd have to be flippin' unlucky for an unathuorised access. However, you should be advised that early devices have been discovered to be vulnerable to quite simple methods of deception, such as fake fingerprints cast in gels. But who do you know that will take your fingers and deep them in a gel? That's a lot of work for someone who just wants to get into your house. He'll be better off if he'll go to you neighbor's house.

try straight up may be locking tabs that you will have to depress copy and paste https://www.youtube.com/watch?v=5INlV-VpO2k ..

It is broken and needs to be replaced. Reach out to the company for a Warranty repair and tell them we sent you.

Remove the batteries. Check them with a multimeter to check they are good. Reinsert them, making sure they are in correct polarity. Also make sure the battery contacts are clean.

Indeed, the Facto lock is currently sold as Kwikset's "264 Contemporary Keypad Deadbolt". However, Coaltowner's link points to the general FAQ page. Here's the page with the PDF user manual (in case anyone else is looking for it): www.kwikset.com/products/detail/264-contemporary-keypad-deadbolt?variant=264cnt-15

GoogleRona Electronic Deadbolt Lock Instructions:Default Master Code:123Resetting Master PIN:Remove batteries and put them back. You will hear a long beep and a short beep.Press and hold the 0 button until you hear 3 long beeps and the LED flashes red for 3 seconds. You are now in program mode.Within 10 seconds, key in a new master PIN (up to 12 digits) and press the UNLOCK button.Key in the master PIN again and press the UNLOCK button. The LED will flash green for 1 second and the resetting is complete.Adding a PIN:Key in master PIN and press UNLOCK buttonPress and hold 0 button until you hear 2 short beeps and the LED flashes for 3 seconds.Release 0 button and you are in the Add PIN modeWithin 10 seconds, enter a new PIN and press the UNLOCK button. You will hear one beep.Key in the new PIN again and press the UNLOCK button twice. When the LED stops flashing the PIN has been added.make model resetting lockhttps://www.google.com/search?q=resetting+Master+pin+on+rona+Electronic+Deadbolt+lock..

You didn't say what brand or model, so here's a generic answer: Find the instructions to reset it to factory codes. Sometimes this is as easy as removing the battery and waiting an hour (or a day) and other times you have to enter special codes, or disconnect a jumper, or connect 2 points with a wire to erase the codes. Once you have the lock reset, put brand new batteries in and follow the instructions for programming a brand new lock. If you don't have the instructions, you can often find them online by entering the brand and model # into the search box of Google or YouTube along with a word or phrase like "instructions" or "manual" or "getting started."

Hi James, I pass the link to download the manual of your LS-DB5000, I hope it works for you Regards Franco Dosil Hola James, te paso el link para que descargues el manual de tu LS-DB5000Espero te sirva Saludos Franco Dosil https://data2.manualslib.com/pdf5/102/10148/1014757-lockstate/lsdb500.pdf?456853582c6cc1ce8a93512f17c5e555&take=binary https://www.manualslib.com/products/Lockstate-Ls-Db500-3989648.html

The clip holding it in either fell off or broke. Take all the pieces to a locksmith and he can put it back together or go get a new one and get them to key it to your key

https://www.kwikset.com/products/details/electronic-locks/913-cnt-15.aspx

Schlage B60 Single Cylinder Grade 1 Deadbolt They come in that size . Google deadbolt for 1.5 inch hole

Dynamite

dead bolt locks normally have a second small tongue above the main one when it is in the out or locked position push that small bit back in then the lock will function normally