20 Most Recent Black & Decker SZ360 Cordless Power Scissors - Page 4 Questions & Answers

0helpful
1answer

What batteries does a Husky H3DTWDIG Torque wrench take.

This torque wrench requires 2 LR44 button batteries (1.5V ea). Here's an Amazon page for this type: Strip of 10 Energizer A76 LR44 1 5v Alkaline Batteries Home Depot provides the manual PDF for download on their website: https://www.homedepot.com/catalog/pdfimages/5f/5f26d0d8-9508-4807-80aa-3654f94e6609.pdf
4/2/2018 7:44:06 PM • Hand Tools • Answered on Apr 02, 2018
0helpful
1answer

Marking tools with a marker

What's your question?
3/16/2018 3:18:17 PM • Hand Tools • Answered on Mar 16, 2018
0helpful
2answers

Ryobi battery will not hold a charge p100 18 volt,

If the battery has been used a lot or has not been kept charged up it likely is shot. A battery that is not used a lot should be kept charged. I keep my battery operated drill on the charger almost all the time. I have two and change them once every two weeks. Several years old and they both work good.
3/12/2018 2:08:00 AM • Hand Tools • Answered on Mar 12, 2018
0helpful
2answers

I need to find a wire which stays live 24/7 under the dash of Jeep Compass 2014

any wire that says batt is always live in the fuse box.
1/16/2018 3:19:54 PM • Hand Tools • Answered on Jan 16, 2018
0helpful
1answer

I live in Forest City area-close to Spartanburg, SC-where can i go to get small Black n Decker battery operated tools fixed

Generally the repair is more costly then just getting a new one, especially black and decker
1/9/2018 11:00:04 PM • Hand Tools • Answered on Jan 09, 2018
0helpful
1answer

Blade installation

noty a question for fixya site get the correct manufacturers site up and ask them
12/20/2017 4:09:37 AM • Hand Tools • Answered on Dec 20, 2017
0helpful
1answer

Tt21 staple gun re assembly

may get a break down from the manufacturer on line but from experience junk it and get a new one easier on the nerves and less frustration
11/15/2017 2:53:16 AM • Hand Tools • Answered on Nov 15, 2017
0helpful
1answer

Forgot how to load the 9/16 brads into craftsman

turn the gun upside down and there is a silver slide plate left that up and there will be the location to load the brads
8/14/2017 7:14:28 AM • Hand Tools • Answered on Aug 14, 2017
0helpful
3answers

Require staples for Primo Staple gun

Have had the same problem but now it
6/24/2017 9:56:38 AM • Hand Tools • Answered on Jun 24, 2017
0helpful
2answers

I have tools and golf clubs in my garage and they

I don't know if you have been having higher then normal humidity where you live but one thing I have done for years that is inexpensive and easy is to wipe down your tools and golf clubs when not in use then spray them with WD-40.On my tools that hang in my shop I just spray them and leave the spray on. The tools that go in my tool boxes I spray and wipe lightly then put them on paper towel liners in drawers.I have my shop in a very old building with no heat unless I'm in it and have my stove burning so my tools are subject to extreme weather conditions. I do the same thing with power tool except being careful not to get any on the motors. I spray the table,blades and fence and mitre guide on my table saw and table,supportpole,gears and spindle on drill press and leave it on. It collect a bit more dust but cleans up easy.
The main ingredient in WD-40 is fish oil so it works great at displacing water and preventing rust. Thank you.
10/22/2016 11:14:41 PM • Hand Tools • Answered on Oct 22, 2016
0helpful
3answers

I need to strip a wire and i only have a knife, any suggestions on how to cut it best?

put the knife to the wire insulation at about a 60 degree angle, and strip it like you are manually sharpening a pencil. sometimes it is easier after you heat up the insulation. or go to the store and get wire strippers for about 5$
4/7/2016 3:30:30 AM • Hand Tools • Answered on Apr 07, 2016
0helpful
2answers

How do I properly use a hand swaging tool for 3.2mm dia wire rope

they do make swagginhg tools that are fixed onto the yoke of a flaring kit. to hand swag, you should use the block of the flaring kit to hold your tubing. if you are swagging half inch tubing, hold the tubing up the diameter of the tube plus one eighth of an inch. tighten down the nut opposite the tube first then the closest one. this will keep the tubing from slipping.
Then hit it squarely with a hammer and it will bottom out at the flaring block. I would ease up on that last stroke to keep from cracking the tubing
3/1/2016 4:59:56 AM • Hand Tools • Answered on Mar 01, 2016
0helpful
1answer

Where is the fuse box layout for t5 transporter

Maybe it hepls you. On this website (link below) you find Fuse box layout and description for Volkswagen Transporter T5 Volkswagen Transporter T5 ESSENTIALS from September 2009 fuse box diagram...
12/26/2015 11:25:32 AM • Hand Tools • Answered on Dec 26, 2015
0helpful
1answer

Electrnic hand growler to test

Go on E-bay for electrical test equipment and look for growler.or go google and type in armature growler test equipment and see what you get.
4/22/2015 10:51:36 AM • Hand Tools • Answered on Apr 22, 2015
0helpful
1answer

Stretching a tension wire on bottom of chainlink fence

Watch this video.

http://www.youtube.com/watch?v=74-GeS-Pjo4

3/5/2015 10:39:38 PM • Hand Tools • Answered on Mar 05, 2015
tip

Better Cables Should I buy them

They always try to sell you better cables but some are good while others are worthless when it comes to cables any type of Digital cable is fine, so HDMI, DVI, Digital Fiber Optic(also called TosLink) will work a $20 HDMI vs a $1000 HDMI will have no difference any anyone who tells you anything else either is trying to sell you a cable or does not know what they are talking about, now if you have equipment and the power cable is removable there is nothing wrong with investing in a nice heavy shielded power cable because the factory cables are shielded but I have seen the produce audio noise I can hear and video noise I can see, also any analog cables are fine to upgrade because good speaker cable is something I could hear the difference so always compare speakers cables to your inexpensive and if you can't hear a difference then return them, in the business we refer to the compare of 2 things as to A and B them. Surge suppressors are great because I much rather that my Panamax surge suppressor gives its life than any of my equipment but now surge suppressors also have Clean Power and what that does is take the small surgers the happen all day everyday out, that is why somebody gets home and they go to turn the TV on and it won't come on, well if you just have some cheap suppressor from Walmart etc the dirty power over time has destroyed the TV so yes clean power is a great thing, check out www.panamax.com for great products and www.soundadvice.com for everything cool as heck, they have everything you need for great sound. Remember if you can hear the difference then return it...
on Feb 12, 2015 • Hand Tools
0helpful
2answers

Manual for mastercraft 52-0052-2

I have it in a Word document. If you give me your email I'll send it.
1/4/2015 5:54:49 PM • Hand Tools • Answered on Jan 04, 2015
0helpful
1answer

I have three wires, yellow, blue and red which operated a fan which I am replacing. The new fan has a small cable junction with three marking, L, N and T. Which wire to which letter is my problem. I

I'd be willing to bet the yellow wire is really white just discolored and if so the that would be N for neutral the white wire, blue has been for the fan light ( L ) on the ones I've done so that would leave the red and T.
1/1/2015 6:02:14 AM • Hand Tools • Answered on Jan 01, 2015
0helpful
1answer

How do you change blade on the Stanley 10-788 box cutter utility knife

go to you tube there is a video that will help
12/19/2014 1:07:26 AM • Hand Tools • Answered on Dec 19, 2014
0helpful
1answer

Need to replace the rotted wood door frame

go to youtube.com and search, many helpful videos
12/6/2014 3:44:24 PM • Hand Tools • Answered on Dec 06, 2014
Not finding what you are looking for?
Black & Decker SZ360 Cordless Power Scissors Logo

29 questions posted

Ask a Question

Usually answered in minutes!

Top Black & Decker Hand Tools Experts

john h

Level 3 Expert

29494 Answers

Larry Ng
Larry Ng

Level 3 Expert

14598 Answers

Ziyaad Khan
Ziyaad Khan

Level 1 Expert

15 Answers

Are you a Black & Decker Hand Tool Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Black & Decker Hand Tools

  • Black & Decker Hand Tools

Most Popular Question

allegheny 24 volts combo tool set

  • Hand Tools
Loading...