Jacuzzi Pump Impeller,3/4HP - Page 6 - Answered Questions & Fixed issues
JD 185,Starter turns but not starting,power but no spark. Blade switch off. Now what do I check?
Spark requires ignition switch in run or start and operator in seat. Try disconnecting the seat switch.
If still no spark check the green wire at the ignition switch terminal M (magneto) for continuity to battery negative (ground). With ignition switch in the off position the green wire will have continuity to ground. In any other position it should be open or high impedance.
Comment for further assistance.
10/3/2023 4:32:05 PM •
Garden
•
Answered
on Oct 03, 2023
•
54 views
Lawnmower will not move while running
no ibfo generic answer --check drive belt --popped off --broke--pulley problem--trans axle problem ---key way on wheel sxle damaged or missing
9/26/2023 12:44:18 AM •
Garden
•
Answered
on Sep 26, 2023
•
31 views
My Scott's 15hp/42 cruise control riding lawnmower will not move after releasing clutch/ brake
It's a rebranded John Deere. See following URL for parts diagrams..
https://partscatalog.deere.com/jdrc/search/type/model/term/S1642
Check the transaxle drive belt is intact and not loose when brake is released. The belt runs from the top drive pulley of the engine to the back of the unit to power the transaxle.
Owners manual is also available for no fee download on the JD website
9/25/2023 5:14:26 PM •
Garden
•
Answered
on Sep 25, 2023
•
25 views
Ride on mower coil keeps burning out
Overheating of the engine and faulty ignition coil components, such as spark plugs and cables, are the most common causes of repeated ignition coil failures. If your ignition coil becomes too hot or becomes burned out after a few attempts, the reason may be due to incorrect spark plugs
9/20/2023 9:29:32 AM •
Garden
•
Answered
on Sep 20, 2023
•
43 views
Husquavrna Lt1536 not cutting
Remove belt tension and test the tension pulley arm (55) rotates freely and spring (148) is in place. See attachment.
Husqvarna (USA) lists the belt as discontinued and no substitute. I find the belt should be 92.5" in. If measurement is questionable then take the belt with you to a local supplier and compare lenth of old belt to a new belt of known length 92.5".
9/18/2023 9:18:53 AM •
Garden
•
Answered
on Sep 18, 2023
•
30 views
SCAG TIGER CUB Zero Turn Lawn Mower. After mowing my Scag will not start again until the next day?
If it's a crank no fire then could simply be valves need adjusted, or possibly the anti afterfire solenoid does not work after it warms. Maintenance schedule for valves is every 300 hrs. You'll need to determine if it's spark, fuel, or neither that is missing.If it's a no crank then it could be starter, starter solenoid, or other. Further diagnosis required.
9/15/2023 12:40:29 AM •
Garden
•
Answered
on Sep 15, 2023
•
34 views
John Deers Sabre GX1438 transmission issue?
this shows the parts exploded views of drive train -deck-with their pulleys and belts check the linkage at transaxle as well as the pulleys -------------- https://www.weingartz.com/illustrated-diagram/john-deere-parts-lookup/model-sabre-1438-lawn-tractor-pc2675/4275-36038
9/7/2023 3:52:16 PM •
Garden
•
Answered
on Sep 07, 2023
•
30 views
Not finding what you are looking for?