20 Most Recent
Jandy Aqualink Rs4 One Touch Control System Control System - Page 6 Questions & Answers
Pool spa heater when freezing temp
It normally will heat up with pump moving water, once the threshold is achieved - system will come out of its Freeze protection mode and will begin to work as programmed. If there is a heat call, heater will come on. You can also locate the sensors, both the Water & Air (they need to be very close in temperature for this to work) then place them in water warmer than the actual ambient temp, & above the temp that triggers "Freeze".
My RS6 all button is
This issuesounds tricky. I recommend you call the Jandy technical support at 800-822-7933and they should be able to help you figure this issue out. Ihope this helps.
I have an aqua link
I just tried this and had luck.
Press the "Cancel" button, first.
Then, press "Programs".
Then, select "Pool Pump".
At this point it will tell you you have 4 programs. I "think" if you hit "Enter", it will offer you "Cancel All" or "Cancel Some". From here, you're on your own!
I would "Cancel All", then just add back the one program. Seems cleaner that way, but ... that's just me.
Good luck!
How to delete programs
I'm glad to provide the instructions to delete program from the System. Please follow the Menu procedure mentioned in the below diagram to view the steps to delete the program.
Thanks for understanding. Please let me know if you require any clarifications.
I have Jandy AquaLinkRS4 control
No. Sounds like you have software or electronic problems. You can have those boards rebuilt for $300 hundred dollars so if you need a new one, insist your technician send it in for a rebuild rather than replace it which will cost much more!
JMy JVA 2440 continuously rotates
Jay,
I had the same problem. The issue is the microswitch "stop" in the valve actuator ( the motor assembly that turns the valve). Open up the actuator case and switch the valve to the direction it does work. You will see the microswitch that does work. Now, reverse the valve to position that it spins on and replace that microswitch. The microswitches are about $25. Good Luck
When spa button is pushed,
you have a broken motorized valve broke. you should have two black boxes with handles at your equitment pad have some one push the spa button while you look at the vavles if one doesnt turn thats your broken on.
It seems my Rs4 in house control panel is
Yes they are compatible the RS6 just controls more item's than the RS4. This is a matter of more relays in your box. So if you want to add say a waterfall later on you have that option.
Not finding what you are looking for?