20 Most Recent
Mustang Rzt 50" Zero Turn Riding Lawn Mower Questions & Answers
Troy bilt wont start
Starter spindle on out RZT50 goes up but will not start the engine.
How can I fix this?
New pto switch stoped working after 4 mowings
Maybe the problem wasn't the PTO switch. My Cub Cadet RZT PTO would disengage when I backed up and then failed to re-engage. I was able to isolate my problem to the safety switches at the base of the steering levers. I sprayed them with WD40 and they've been fine. Just a thought and worth checking. I hope this helps.
When I turn the key on to start my Troy-Bilt RZT
Do you hear a clicking sound???NO ?? Do you have the speed ?turning handles in the extrem OUT position? Is the ground cable connected to the engine block?? Is the Red cable connected to the + Positive post on the battery?? Is the BLACK cable connected to the - Negetive post on the battery?? Why did you need to replace the fuse? Is the battery charged??
If none of the above corrects the problem replace the ignition switch
Can you grease the spindle on mustang
The factory spindles do not have grease fittings. I had to replace one of mine and the replacement did have a grease fitting. After seeing this, I drilled, tapped and installed grease fittings in the remaining two spindles. Ounce of prevention.....
Not finding what you are looking for?