20 Most Recent Pride Victory 4 Wheel Mid-Size Electric Scooter - Page 3 Questions & Answers

Page 18 of the manual shows the throttle lever on both sides. Contact Pride Mobility direct. https://www.pridemobility.com/pdf/owners_manuals/us_scooter/us_go_go_elite_traveller_plus_om.pdf ..

If the latch on your Pride Jet 3 Ultra power wheelchair won't stay latched, there are a few potential causes and solutions you can try:

1. Check for obstructions: Inspect the latch mechanism and the surrounding area for any obstructions or debris that may be preventing it from latching properly. Remove any obstacles and ensure that the latch can move freely.
2. Adjust the latch position: Sometimes, the latch may need to be adjusted to ensure a proper fit. Check if there are any adjustable components on the latch mechanism and try repositioning them to achieve a secure latch.
3. Tighten or replace the latch: If the latch is loose or worn out, it may not hold securely. Check if there are any screws or fasteners that can be tightened to secure the latch. If tightening doesn't solve the issue, you may need to replace the latch with a new one.
4. Seek professional assistance: If the latch continues to have issues or you are unsure about making adjustments or replacements yourself, it's best to contact Pride Mobility or a certified technician for further assistance. They will have the expertise to diagnose the problem and provide the appropriate solution.

Axels do not need greasing. Check the clutch releases properly.

Question edited for clarity, add maker and fix typos. Question moved from Cars and Trucks to Pride Mobility. Please don't type in all CAPS, it is considered SHOUTING and is harder to read. There is no service Manual and no wiring schematic. The manuals only show battery wiring. This is for the Shoprider and it may be close enough https://www.shoprider.co.nz/pdf/troubleshooting.pdf https://www.google.com/search?q=pathrider+140xl+service+manual https://www.google.com/search?q=pathrider+140xl+wiring+diagram ..

Are you refering to the go go ?

This is your manual. It looks like you can't. https://manualzz.com/doc/6792289/power-chair-owner-s-manual ..

Get a can of Electrical Contact Cleaner spray and separate any electrical connectors that you can see, and re-make the connection. You have a bad connection somewhere that is losing contact with a bump. The most likely places are any from the battery, or any to the controller. Make sure the two connector halves are fully locked in place. Some have fuses, some have breakers, check the connections there as well. You say it has only done 8 miles. If you bought it new, it is under dealer and maker warranty. I was hoping to find you a manual, but 'GoGo' is a range of models. https://www.google.com/search?q=Pride+GoGo+manual Shutting off on bumps is a known issue caused by the battery box bumping. https://www.google.com/search?q=Pride+GoGo+shuts+off+on+a+bump ..

Question edited for a lot more clarity. Presumably English is not your first language. Duplicate post with worse English deleted. Refresh page to see your question published. We are FIXYA dot com. We don't sell anything, we only supply FREE information. The best place to buy spare parts is from 'Monster Scooter Parts' in this link. Be aware that Pride Go Go is a range of scooters in 3 wheel, 4 wheel, XL, Traveler, Elite, Ultra and Sport, so make sure you state the correct model. https://www.google.com/search?q=Pride+Mobility+Go+Go+Scooter+parts ..

google go go pride 3 wheel parts

Here are the Gogo Manual and mentions brakes.

Pride Mobility Go-Go ELITE TRAVELLER Owner's Manual

ManualsLib https://www.manualslib.com > ... > Go-Go Elite traveller View and Download Pride Mobility Go-Go ELITE TRAVELLER owner's manual online. Go-Go ELITE TRAVELLER scooter pdf manual download. Also for: Gogo. ..

Contact them direct and ask

owner's manual - Pride Mobility Products

Pride Mobility Products https://www.pridemobility.com > pdf > us_j6_om PDF Once you understand how to safely operate and care for your power chair, it should give you years of trouble free operation and service. Read and follow all ... ..

question edited for clarity. Help in the link and access to the maker. https://www.google.com/search?q=Pride+Devilbiss+Mobility+wiring+diagram ..

AN EV WHEEL CHAIR; 1: bad battery always tops the list;. 2: battery lugs rusty /loose 3: battery charger bad. (lies to you, too) 4: something far worse shorts or bad EV motor,excessive current) 5: something that causes motor drive to bind up . overloading motor ask shop find this and do all tests to find it. ask them?

Do you get any flashes from the controller lights? This is usually the way you diagnose errors. A high number of flashes/beeps often means there is an issue with the controller or joystick. Batteries are only fitted if they are needed so a 'spare' battery isn't very likely. Most wheel chairs and scooters need a powerful battery to spin the electric motor so a pair of batteries are used. The two batteries also act as a counter weight to keep the chair upright. They are normally fitted in a 'serial' or 'in-line' set up. Basically into one battery, across to the second battery then out through the second battery.

If you use Lithium cells, you must use a special charger and have a protection circuit for the batteries otherwise you will have a fire and no ne can put out a lithium ion battery when burning.

hi, hope this helps. regards rob

The rubbing sound you are describing could be caused by a variety of issues, such as a problem with the drive wheel or the motor. It could also be caused by debris or an obstruction getting caught in the moving parts. It is best to have the chair inspected by a qualified technician to determine the specific cause of the noise and to make any necessary repairs.

https://www.pridemobility.com/pdf/owners_manuals/us_scooter/us_zt10_om.pdf (Page #12)

I have Raptor mobility scooter service manual. Let me know if you are still interested in it, I can send you PDF copy.