Pride Mobility Products Pride Mobility Maxima 4 Wheel Hd Scooter with 55AH Battery & Charger + Flat Free Tires 22x18 Hi Back Deluxe Fabric Seat - Answered Questions & Fixed issues

hi , sounds like the brake is clicking which in this case is normal, sometimes as the brake wears the clicking get nosier. Can you please confirm where the clicking is coming from ??. Regards Rob www.gewizrepairs.co.uk

that could be that you need a new pot for spped control bar, is there any up and down movement ? if yes that could be intermittant

Regards
GeWiz.

hi, okay now does this happening every time ? or is the distance variable ?check the batteries are fully charged, if possible check the batteries with a electrical meter when it stops again , insert the probes in the charger socket the outside ones , the middle on you can ignore , check the voltage , below 23 or 24 volts this means that once you start going again the voltage will drop causing the controller to cut out , they normally cut out at about 18 volts .Satisfied that's okay now the brake could be breaking down ? do you hear it click when going along ?At worse your controller could be breaking down Regards

Most scooters show a drop on the battery level meter when in use, as long as it is`nt slowing down it should`nt be a prob. I mean,when you engage the throttle you ARE putting a load on the batteries,so it`s only par for the course that the indicator would drop a bit.

Sorry but your probably going to have to get this to a service technician. That is a big problem you have there. Most wiring is`nt even color co-ordinated so it`s not a matter of matching up colors. I`d call a professional,

Sounds like you have a bad charger. If you have access to a volt meter you can set it to volts DC put the meter to the batteries then plug in the charger. If the volts go up on the meter after you plug in the charger is working ok. 

the motor will automatically brake the scooter to stopped and keep it locked there until it is running again or put manually in neutral.

Usually when things electrical get wet they fail.

Try this site: https://shoprider.com/resources/user-manuals

From a pure physics standpoint... The energy to climb a hill... be it from the steep side or the gentle sloping side is the same... It is just easier on your heart and joints to take the gentle slope... (assuming you have the time). ERGO: If treating the scooter like a QUEEN is your goal... DEFINITELY GO SLOW. Tat way you will have no idea if it has any weak spots when you need it to go fast (and you will). I'm old... I don't have TIME to waste! Carnac the Magnificent

Maybe too late for this advice but it is important to take a detailed photograph of the wireing before unplugging anything.

Hi not much info is there a red LED & green LED on charger...or is there a red LED & orange led on ?? Bit more info would help cheers

Hi check the main circuit breaker c photo push the white button in to c if it has tripped open cheers

Yes a technician with a programmer can set the control very slow so it is limited on how fast it can go. Otherwise the joystick is meant to be adjustable, so setting it to one speed only not possible. I’m happy to assist further over the phone at https://www.6ya.com/expert/bill_bcbb89783b08c489

hi Linda, can you please tell me what model pride this is ? Regards Rob

Candy Apple paint is extremely hard to patch repair. It has a base coat of silver or gold and then multi coats of the candy apple over the top. You can get a paint that is meant to be a touch up for candy apple but you never end up with the same shade of color. Most of the time it will come out dark blood red anywhere that it over laps the old paint. I would contact Pride as they may use a paint that does not require a base coat.

Check you're freewheel lever if its in freewheel u have to take the key out engage lever & put key back in. Also if u have left the key on for more than twenty minutes the circuit will shut down only the light will work. take key out for 5 minutes then put it back it should work unless it's another problem good luck

Bearing probably.

Battery connections?

Your jazzy chair should have 2 levers. There is a lever for each wheel. if the other wheel does not have the lever, then you are missing the lever that would release the wheel. Have a local tech look at it and they may be able to get the parts needed to release the other wheel.