20 Most Recent
Porter Cable 362 12 Amp 4 Inch By 24 Inch Belt Sander With Cloth Dust Bag - Page 4 Questions & Answers
I have a Porter Cable FC350-Type 2 Nail Gun . The
I would check the tension on the spring that pulls the nails into position. Make sure that when the rack of nails is out, that the loading mechanism is reaching the top of the gun. I would also recommend that you oil the gun prior to each use. If you are using it regularly through outt the day, then I would definitely recommend oiling it through out the day.
Router bogs down when starting to work
Several possibilities--- Are you using a short and stout extension cord plugged into a robust outlet? Is the bit dull? Are you taking too heavy of a cut? If you are cutting a wide or deep slot you should probably take it in 2 or 3 passes making the slot deeper each time.Good luck.
BELT SANDER DOESNT ROTATE
Check to see if the drum is turning. If it is you need to tighten the belt tension and adjust for runout. If not you have a more serious problem.
Loud whinning 7539
Noises like that are usually a bearing going, or gone, bad. If you keep running it eventually the alignment of the armature will be off enough to make contact with the field and one or both will get damaged enough to warrant replacement. Bearings run between $7 to $15 to replace. Armatures are $175 and Fields are $110 for your router.
Not finding what you are looking for?