20 Most Recent Garmin eTrex Venture HC GPS Receiver - Page 4 Questions & Answers

hi, I don't know if you managed to solve the no Vietnamese language directions for the garmin gps but here is one way to do it.

[1]-Go to this link, download and install the voice studio

[2]-When you run the program there will be a list of all the phrases the GPS unit uses to give u direction. when you record instead of reading the phrase written just say the phrase in Vietnamese( or whatever language you want) and save it.

[3]-Once you record all the phrases on that list in the language
of your choosing, then test hit the test button to make sure
the phrases sound right.

[4]-Finally just send it to your Garmin GPS unit.(Make sure that
your device is connected to your computer when you send to
the deice though). (Duh!!)

I hope this help you whatever language you needed

Leave it connected and charging. It can take hours to recover.

notify garmin for assistance

Needs a new battery.

I'll give the answer that Garmin gave me. BUY A NEW ONE!

You need the correct battery or the time it has on its own power may be comprimised.

perhaps it needs new batteries

Well, Garmin Express is compatible with all versions of windows above Vista, 7, 8, or 10. It is also compatible with the Mac operating system.

Download Garmin Express to the computer, register the Device and then connect the Nuvi. Very simple and fast.

n?vi 57/58/67/68 - Updating Maps and Software with Garmin ...

www8.garmin.com > nuvi57-58-67-68 > EN-US

You can use Garmin Express™ software to download and install the latest map ... large, and this process may take a long time on slower Internet connections.

Contact Garmin to inquire.

By operating the power switch and holding it in the off position until your Nuvi shuts down

If you are outside in a wide open area and can't detect any satellites, your Garmin C330 may have failed.

Contact Garmin to inquire.

When my Garmin becomes speechless, I disconnect power for awhile, then reconnect. So far has worked every time.

Contact Garmin directly to inquire.

https://support.garmin.com/en-US/?faq=lp6fMk4iHI3APTGf0rpbVA

The older Garmin has a Nickel metal hydride battery, and they do deteriorate over time, however, if it works when plugged into the USB port of a computer (5 volts), it should work when plugged into the car charger (12 volts to 5 volts) even if the battery is bad.As long as you are certain it works fine on the computer, replace the battery for 25 bucks. However, technology has moved on, no more plastic screens and 'Lane Assist' is an absolute godsend!https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ALeKk00yZWjgSvr4aN2v_RmsPo4swenxcA%3A1602867987245&ei=E9OJX9XDDtC4tQaiop6ABw&q=garmin+330+replacement+battery..

GE is an app. It is regularly updated. Be sure it is up to date. When your GPS is plugged into a USB port via a standard USB cable it will enter the MASS STORAGE MODE. If GE is installed properly, it will auto recognize the unit and open. Do not use a Garmin cable to plug it in. It will not enter the mass storage mode with that cable.

Check this Garmin video https://support.garmin.com/en-US/ql/?focus=videos

Has yours been updated recently? I updated mine, (about a year ago), on the website and it wiped all the map data. I think some of the more recent software update versions have caused problems for certain sat nav models. Try logging onto the Garmin website, connect you sat nav to you computer and check it has the current software updates. Older models sometimes need to be reset to an previous version of the software to work correctly. To do this you might have to contact Garmin directly by Email to get them to send you the correct software version. Hope this helps.