20 Most Recent Samsung DVD-V9800 DVD Player/VCR - Page 3 Questions & Answers

0helpful
1answer

How do I program a BN59-00850A remote to pair with my Samsung DVD player

Here are the general steps to program a BN59-00850A remote to pair with a Samsung DVD player:
  1. Turn on the DVD player and make sure it is set to the correct input on your TV.
  2. Locate the "Code Search" button on your BN59-00850A remote, this button is usually located at the top of the remote. Press and hold the "Code Search" button until the indicator light comes on.
  3. Press the "DVD" button on the remote and release the "Code Search" button. The indicator light will flash to indicate that the remote is in programming mode.
  4. Use the numerical buttons on the remote to enter the code for your Samsung DVD player. The code can be found in the remote control's user manual, or by contacting Samsung customer service.
  5. Press the "Power" button on the remote. If the code is correct, the DVD player should turn off.
  6. Press any button on the remote to exit programming mode.
  7. Test the remote by pressing the "Power" button to turn on the DVD player and other buttons to ensure that they are working properly.
1/24/2023 8:05:15 AM • Samsung... • Answered 3 days ago
0helpful
1answer

Samsung BN59-00599A Remote Control to Bush tV

The BN59-00599A remote was included with several Samsung TV models, including the FP-T5084. While it can be used to control some other devices in your home theater system, it doesn't have codes for other TVs. See the user manual available at the support page: https://www.samsung.com/ca/support/model/FPT5084X/XAA/#downloadshttps://www.samsung.com/ca/support/model/FPT5084X/XAA/#downloads . The section on setting the remote for DVD players, VCRs and other devices starts on page 20. I wish that I had better news for you. To control the Bush TV, look for a generic universal remote that was programmed more than 6 months after the TV was manufactured. (Not all remotes will list codes for Bush TVs, however the code for another brand may work.) Cindy Wells
1/24/2023 12:00:13 AM • Samsung... • Answered 3 days ago
0helpful
1answer

How to fix my Samsung tv that is flashing white light

There is a good chance you have a bad panel, put the original boards back in the set, unhook the ribbon cables going to the panel boards from the main or tcon, I didn't pull service info so don't know if this set has a tcon board, in either case, remote the ribbon cables going to the panel boards , if the set comes on with backlights, naturally no picture, the panel is bad
1/23/2023 1:04:38 AM • Samsung... • Answered on Jan 23, 2023
0helpful
2answers

Samsung LCD TV turns on and off on it's own

Based on the symptoms you described, it sounds like there may be an issue with either the power supply board or the main board of your Samsung LCD TV. The fact that the TV keeps turning on and off repeatedly on its own, and now it won't start up at all, suggests that there may be a problem with one of these components. When you unplug the cord connecting the power supply board to the main board, and the TV backlights stay on without turning off, it indicates that the power supply board is working properly. However, when connected to the main board, the backlight turns on and off, which suggests that the issue is with the main board. It's possible that the main board is malfunctioning and not providing the correct signals to the power supply board, which is causing the backlight to turn on and off. Replacing the power supply board with a new one and still experiencing the same issue, confirms that the problem is not with the power supply board. It's important to diagnose the problem correctly and not just replace parts without properly testing them, as this can lead to wasted time and money. A proper diagnosis can be made by a technician with a scanner that can read the codes and check the signals of the main board and power supply board. It's also a good idea to check all cables, connectors, and other electronic parts of the TV, as any damaged or loose parts can cause the problem as well. It's recommended to check the TV's warranty status and the manufacturer's instructions to ensure that the repair or replacement will not void the warranty. If the TV is out of warranty, it might be more cost-effective to consider purchasing a new TV, as repairing an older model might not be cost-effective.
1/23/2023 12:55:22 AM • Samsung... • Answered on Jan 23, 2023
0helpful
1answer

How do I get Alexa to work on my QLED Samsung 65 inch TV

You are now prepared to use Alexa. To get started, open the Alexa TV app on your Samsung TV. You are able to utilize Alexa now that you are connected. You will have the option to activate Alexa Hands-Free if it is offered. Consider utilizing Alexa. You are now prepared to use Alexa.
1/21/2023 9:59:21 AM • Samsung... • Answered on Jan 21, 2023
0helpful
2answers

Samsung TV, un55nu6900fxza, no pict, have backlight, red on button on, it goes into standby mode with samsung moving around on screen. motherboard bn9649639A any thoughtss

Based on the symptoms you described, it sounds like there may be an issue with the main board (motherboard) of your Samsung TV. The fact that you have backlight and the red power button is on, but there is no picture and the TV goes into standby mode with the Samsung logo moving around on the screen, suggests that the main board may be malfunctioning. The specific part number for the main board (motherboard) in your TV model is BN9649639A. You can try to locate and purchase this part online or through a Samsung parts supplier and replace it yourself, but it is important to note that this can be a complex and difficult repair. If you are not comfortable with electronic repairs, it would be best to contact a professional technician or Samsung's customer service for assistance. It's also possible that there is a problem with the T-Con Board. The T-Con board works in conjunction with the main board to control the display of the TV. If the main board is working correctly, and you still have no picture, then it's likely that the T-Con board is defective, and it will need to be replaced. It's also a good idea to check all cables, connectors and check for any loose or damaged parts in the TV, as that could be causing the problem as well. In any case, it is recommended to check the TV's warranty status and the manufacturer's instructions to ensure that the repair or replacement will not void the warranty.
1/21/2023 12:41:40 AM • Samsung... • Answered on Jan 21, 2023
0helpful
2answers

Ln52A550p3fxza samsung tv comes on with loud noise and scrambled screen, any help?

LN52A550P3FXZA TV. The T-con board is responsible for the image processing and video output, and a malfunctioning T-con board can cause a loud noise and a scrambled screen. Other possible causes could be a faulty mainboard or power supply, damaged or loose cable connections, or a malfunctioning panel. I recommend attempting the following steps before seeking professional help:
  1. Check all cable connections to make sure they are securely plugged in and not damaged.
  2. Unplug the TV for at least 30 seconds and then plug it back in.
  3. Try a different input source to see if the problem is with the source or the TV.
  4. Perform a factory reset on the TV by going to the menu and selecting Support > Self Diagnosis > Reset.
  5. If none of the above steps work, it may be necessary to contact a professional repair service or Samsung customer service for further assistance.
1/21/2023 12:31:20 AM • Samsung... • Answered on Jan 21, 2023
0helpful
1answer

Samsung TV DF400BGLV1H is dead. Looks like a short on LED backlight?

Based on the symptoms you described, it sounds like the problem is likely with the LED backlight strips on your Samsung TV model DF400BGLV1H. When you disconnect the LED connector, the standby voltage comes back, and the T-CON board blue LED lights go on and the boot sound. Also, the fact that the power supply board measures 225 volts on pin 1 and 2 of the D+ on the connector when disconnected and toggles off when connected to the LED, suggest a short on the LED side. It is possible that one or more of the LED backlight strips may have failed, causing a short and preventing the TV from powering on properly. In this case, replacing the LED backlight strips would be the most likely solution to the problem. Keep in mind that it is always a good idea to double-check all connections and components for proper function and continuity, before replacing any parts. It's recommended to seek the help of a professional technician or contact Samsung customer service for further assistance, especially if you are not familiar with TVs. Also, make sure you get the right replacement parts and follow the instructions.
1/20/2023 2:51:03 PM • Samsung... • Answered on Jan 20, 2023
0helpful
1answer

Samsung UN40MU6300FXZC tv would not come on, No standby light.

Hi Walter, I can help you with your TV issues. On Samsung TV's it's normal for the backlights to come on if the connector going to the main is disconnected, on most other makes this isn't the case however. This tells two things, the backlights themselves are working and the hot side of the power board is working plus the inverter, it sounds like you have main board issues, and it will need replacing, it's been the EEPROM that fails on this model, and it has the exact symptom you're seeing. Both parts can be purchased at shopjimmy.com, naturally the IC will be cheaper but replacing it involves advanced soldering skills and the equipment to do it so replacing the board may be your best best
1/17/2023 10:02:21 PM • Samsung... • Answered on Jan 17, 2023
0helpful
3answers

Samsung UN70NU6900FXZA desperation. Red LED at power button blinks 2x. TV won't turn off. No picture. Backlight goes on and off like it's power cycling.

I have the same problem, I mean the exact same sinario. I just ordered and replaced both boards and the cords and ribbon that came with the order and the problem continues. Following
1/17/2023 4:28:37 AM • Samsung... • Answered on Jan 17, 2023
0helpful
1answer

Samsung tv picture goes black to blue and red power button light goes on and off

The device sources and the inputs have not been set to the correct mod.There could be a problem with the TV it's self for it to be turning off like a problem with the power supply for the TV.
1/15/2023 7:34:21 AM • Samsung... • Answered on Jan 15, 2023
0helpful
1answer

Tengo un tv samsung y tengo un control universal polar no tengo la hoja de codigos o de un tv daewood

ENGLISH (corrected for spelling): I have a Samsung TV and I have a Polar universal control. I don't have the code sheet or a Daewoo TV. the codes of Samsung tv or a Daewoo DVD. The Polar will only do one device. Daewoo Television codes https://www.eliztech.com/remotes/codelists/daewoo-tv-codes Daewoo DVD codes https://www.eliztech.com/remotes/codelists/daewoo-dvd-codes Best idea https://www.fixya.com/support/r29872378-universal_remotes_no_facsimile_remote https://translate.google.ca/?sl=en&tl=es&op=translate ..
1/14/2023 3:36:10 AM • Samsung... • Answered on Jan 14, 2023
0helpful
1answer

Samsung HP-S4253x plasma TV flashing broad bright vertical orange bars and many pixels flashing green color

your Samsung TV is experiencing issues such as sound but no picture, you can reset it by unplugging it and holding the power button for 30 seconds. If you're having issues turning your TV on, you may need to unplug it for 30 seconds and plug it directly into an outlet that you know works properly. You can also try pressing and holding the power button on your remote until the TV turns off and on again. If the issue persists, please contact Samsung Support for further assistance. REFERENCES: https://www.samsung.com/ca/support/model/HPS4253X/XAC/
1/13/2023 3:20:38 PM • Samsung... • Answered on Jan 13, 2023
0helpful
1answer

50" Samsung Smart 4K TV Doesn't Start Up Right Away & a FEW thin black & white horizontal lines?

Turn the TV off and unplug it from the wall and also unplug everything that is connected to your TV for about 1 minute and plug everything back in again. There could some thing wrong with the power supply or a problem with the t conn board here.
1/11/2023 9:30:53 PM • Samsung... • Answered on Jan 11, 2023
0helpful
1answer

Samsung un65f9000 tv turn on and off

It could be the power timer has been turned on and check the power timer on your TV as well. Check the settings too.
1/8/2023 8:39:02 AM • Samsung... • Answered on Jan 08, 2023
0helpful
1answer
0helpful
1answer

How do I enable closed captions on samsung smart TV?

Unfortunately, most TVs only support closed captions on the RF (OTA or analog cable without a set-top box) input. For other sources, the captions are enabled at the source device or app. The Samsung Series 8 UA65TU8000KXXS does support some subtitled files from the USB drive. However, the support is limited to select subtitle and video formats. What is the format for these videos? See page 134 of the E-manual for details; the menu section on the subtitles is shown starting on page 222. The manual for this model is available on the product page: https://www.samsung.com/sg/tvs/uhd-4k-tv/tu8000-65-inch-crystal-uhd-smart-tv-ua65tu8000kxxs/ . The current link to the manual is https://downloadcenter.samsung.com/content/UM/202208/20220802172628638/NIKDVBADT-3.2.0_EM_NIKE_ASIA_ENG_220110.0.pdf . I hope this helps. Cindy Wells (VLC can support a number of caption file types. See https://www.rev.com/blog/resources/how-to-add-captions-and-subtitles-to-vlc-media-player-videos-and-movies . There is also a plugin that lets the program find subtitle files automatically. One or both of these is probably why the video captions work on VLC for Android.)
1/7/2023 1:17:29 AM • Samsung... • Answered on Jan 07, 2023
0helpful
5answers

Samsung backlight on and off w/ no picture?

I know this is from a few months ago.... but I just had the exact same thing happen to my Samsung UN70NU6900F. After doing some research and taking the back off I've come to believe it's the cable ribbon! I've managed to get my picture to come back on multiple times, so I'm gonna order a new ribbon and hope that's the case ??
1/6/2023 8:10:48 PM • Samsung... • Answered on Jan 06, 2023
Not finding what you are looking for?
Samsung DVD-V9800 DVD Player/VCR Logo

53 questions posted

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76851 Answers

 Grubhead
Grubhead

Level 3 Expert

5750 Answers

Cindy Wells

Level 3 Expert

6583 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Samsung Televison & Video

  • Samsung Televison & Video

Most Popular Question

need set up remote dvd v98000

  • Televison & Video
Loading...