20 Most Recent Labtec Logitech 1200 Webcam Questions & Answers

0answers
0helpful
1answer

I need the windows 7 driver for the Labtec 1200

1st You download Webcam Driver.need the windows 7 driver for the Labtec 1200 skype cameraAfter this install the Webcam driver in the system.Installation of Webcam DriverGo to the control panelClick on the System IconClick on the Hardware TabClick on the Device Manager sSelect the Unknown Device or printer device where yellow Question Marks sign on it.Right click on it and uninstall it.After this go to the top of the device manager and click on scan for hardware changes.Driver installation Wizard start.Brows Your Driver from the Hard Disk and click on next.Driver will be install.
8/16/2012 7:24:39 PM • Labtec Logitech... • Answered on Aug 16, 2012
0helpful
1answer

Iwant to see my friend

use yahoo messenger or Skype.
7/5/2011 10:57:15 AM • Labtec Logitech... • Answered on Jul 05, 2011
0helpful
1answer

Do i need a disk to start useing the webcam orwhat

Try having the webcam connected and then powering up the system. Depending on your version of Windows and the design age of the webcam, Windows may automatically install the driver for it. During the boot, a window should appear in the lower right corner informing you that it has 'found a new device' and is installing the software for it. If it does not have the driver in its library, Windows will instruct you to insert a disc. If all else fails, you can download the required software from the Logitech website.
6/2/2011 12:43:12 AM • Labtec Logitech... • Answered on Jun 02, 2011
0helpful
1answer

I have just brought a

Hi lynne_law ,

Many people mistakenly think that webcam can be used for audio as well as video transmission.

  1. Webcams don't usually come with microphones , therefore you would require a separate microphone for your voice recordings and voice chats.
  2. I would suggest you get a headset which would have the microphone option as well , or you can get a hand held mic.
  3. Once you get a new mic, you need to connect it to your computer by plugging in the mic in the appropriate slot , and by default the mic should work.
  4. If it does not work , you just need to change the microphone settings using the volume control option or audio settings via control panel.
Hope this helps ... ) Your feedback would be appreciated.
5/17/2011 9:37:36 AM • Labtec Logitech... • Answered on May 17, 2011
0helpful
1answer

Does the Labtec webcam 1200

Yes. To test it you can go to this free webcam test site, record yourself and play it back.
4/9/2011 11:03:19 PM • Labtec Logitech... • Answered on Apr 09, 2011
0helpful
1answer

I have just installed a Logitech webcam C120 and I

I don't believe this unit has built in microphone. If you are using live messenger or skype for the camera you can go into the audio and video setup, in there you can tell if you have a mic or not. the box which would let you choose your mic (many computers have built in mic) if the box says no mic attached, you don't have one. you can buy a cheap mic from radio shack or store like best buy. they cost less than 10 bucks. of course you could use anymic that you can plug into the 1/8 in jack on your comptuer ( the red one).
3/14/2011 10:30:19 AM • Labtec Logitech... • Answered on Mar 14, 2011
0helpful
1answer

I have a driver for

We will need more information to resolve this issue
3/5/2011 6:12:46 PM • Labtec Logitech... • Answered on Mar 05, 2011
0helpful
1answer

I want to install my webcam to my laptop but i

Dear Emily Wilson

I am pleased to inform you that I have found what appears to be the device drivers pertaining to your hardware. I have not actually installed the software as I do not have the same device as you, but on the face of it, this link should be exactly what you need. So here it is

http://en.kioskea.net/download/webcam-drivers-148

I hope this is the fixya for you, and look forward to hearing how you got on with this

Yours sincerely

Oz
2/28/2011 12:14:53 AM • Labtec Logitech... • Answered on Feb 28, 2011
0helpful
1answer

Where do i find a driver for the c260. are there

Copy on this site and paste it in your web browser

http://www.labtec.com/index.cfm/service/listing/EUR/EN,crid=68,crid2=1764

to down load Labtec Camera Drivers.

Then do this.
Disconnect the Camera from the USB port and reinstall the CD or Downloaded software program. When the program asks you to connect the camera to the USB port, do so and it should work.
Then to use it on the Web, do this.
Web Camera's have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:
After downloading and installing Skype

http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/

set it up as follows:
Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
Then click on the Video Settings.
The camera, if Installed Properly, it will come up and show a video picture.
Then, on the bottom of the page click save.
The camera and audio should function properly. Your friends and Family will now be able to see and hear you.

B. Yahoo Setup:
After downloading and installing Yahoo Messenger

http://www.soft32.com/download_30.HTML

set it up as follows:
Go to Messenger at the top left and click on it.
Next go down to Preferences and click on it.
Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
Next go to the Test Audio section and (in blue writing) click on "Open the call setup assistant" and follow the instructions on the left window.

C. Windows Live Messenger:

http://download.live.com/Messenger

After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
Then on the Windows Live messenger window on the right side, click on " "Show Menus." And then click on "Show the Menu Bar".
Next go to the Menu Bar on right side, click on " "Action."
Go to "TOOLS" and click "Audio and Video Setting" and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.

D. AIM (AOL) Messenger:

http://dashboard.aim.com/aim

On the VIM sign-in window click on Edit.
Then click on Settings Enhanced IM.
Next click on Enhanced IM.
Then click on Audio Video.
The Audio and Video portion has drop downs so you can select the proper audio card and video camera installed in you computer.
The Audi Video drop downs are
Microphone
Speaker
Camera
The audio and camera should function now.
Additional information to use with VIM settings.
Adjust Your Audio and Video Settings:
In order to adjust your audio and video settings, please follow the steps given below:
1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window. If you are currently
Participating in an AOL Live Video IM session, a message will display: You must disconnect the current AOL Live Video IM
Conversation before running setup. Would you like to disconnect now? Click the Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working
Properly. Follow the on-screen prompts.
Notes:
The first time you use AOL Live Video IM, a message will display: Would you like to first check your audio and video settings? Click the Yes button.
The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly.
Follow the on-screen prompts.
images in AOL Live Video IM may appear reversed, or as a mirror image (text may appear backwards) when you look at your own camera feed or at the
Picture-in-picture (PIP) display.
After making the settings your ready for a chat and video talk with your Family and Friends.
Hope this helps. Bud
2/11/2011 1:40:11 AM • Labtec Logitech... • Answered on Feb 11, 2011
0helpful
1answer

Nesecito instalar gatis mi camara no tengo cd

Hi Lamilena,

Por favor, descargue el controlador desde el siguiente enlace e instalarlo ....

http://en.kioskea.net/download/download-1554-driver-logitech-quickcam-pro-4000

No se olvide de tasa de mí ... gracias de antemano ...
2/9/2011 12:48:23 PM • Labtec Logitech... • Answered on Feb 09, 2011
0helpful
1answer

What computer system is Labtec

It is packaged and softwared for Windows Operating Systems. But it will work on a Mac, it just doens't have any software or drivers that come with it. Use something like Photobooth and it will be under camera in drop down menu
1/28/2011 8:56:10 PM • Labtec Logitech... • Answered on Jan 28, 2011
0helpful
1answer

My logitech 120 webcam was

Reinstall Driver
1/28/2011 7:22:04 AM • Labtec Logitech... • Answered on Jan 28, 2011
0helpful
2answers

I no longer have the disk to load it on my

http://www.labtec.com/index.cfm/service/listing/AMR/EN,crid=68,crid2=1764
click on link and download drivers for it here...hope this helps
1/14/2011 12:12:52 AM • Labtec Logitech... • Answered on Jan 14, 2011
0helpful
1answer

I have windows 7 and a labtec 1200. Im on stickam

Follow the instructions below and it will work.

Disconnect the Camera from the USB port and reinstall the CD or Downloaded software program.

When the program asks you to connect the camera to the USB port, do so and it should work.

Then to use it on the Web, do this.
Web Camera's have to be setup on the program they are to be used with. Just installing the
camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:
After downloading and installing Skype

http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/

set it up as follows:
Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
Then click on the Video Settings.
The camera, if Installed Properly, it will come up and show a video picture.
Then, on the bottom of the page click save.
The camera and audio should function properly. Your friends and Family will now be able to see and hear you.

B. Yahoo Setup:
After downloading and installing Yahoo Messenger

http://www.soft32.com/download_30.HTML

set it up as follows:
Go to Messenger at the top left and click on it.
Next go down to Preferences and click on it.
Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
Next go to the Test Audio section and (in blue writing) click on "Open the call setup assistant" and follow the instructions on the left window.

C. Windows Live Messenger:

http://download.live.com/Messenger

After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
Then on the Windows Live messenger window on the right side, click on " "Show Menus." And then click on "Show the Menu Bar".
Next go to the Menu Bar on right side, click on " "Action."
Go to "TOOLS" and click "Audio and Video Setting" and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.

D. AIM (AOL) Messenger:

http://dashboard.aim.com/aim

On the VIM sign-in window click on Edit.
Then click on Settings Enhanced IM.
Next click on Enhanced IM.
Then click on Audio Video.
The Audio and Video portion has drop downs so you can select the proper audio card and video camera installed in you computer.
The Audi Video drop downs are
Microphone
Speaker
Camera
The audio and camera should function now.
Additional information to use with VIM settings.
Adjust Your Audio and Video Settings:
In order to adjust your audio and video settings, please follow the steps given below:
1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window. If you are currently
Participating in an AOL Live Video IM session, a message will display: You must disconnect the current AOL Live Video IM
Conversation before running setup. Would you like to disconnect now? Click the Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working
Properly. Follow the on-screen prompts.
Notes:
The first time you use AOL Live Video IM, a message will display: Would you like to first check your audio and video settings? Click the Yes button.
The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly.
Follow the on-screen prompts.
images in AOL Live Video IM may appear reversed, or as a mirror image (text may appear backwards) when you look at your own camera feed or at the
Picture-in-picture (PIP) display.
After making the settings your ready for a chat and video talk with your Family and Friends.
Hope this helps. Bud
12/15/2010 12:22:08 AM • Labtec Logitech... • Answered on Dec 15, 2010
Not finding what you are looking for?
Labtec Logitech 1200 Webcam Logo

74 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Labtec Computers & Internet Experts

Rob Hill
Rob Hill

Level 3 Expert

1465 Answers

George Etukudo

Level 2 Expert

336 Answers

Marvin
Marvin

Level 3 Expert

85240 Answers

Are you a Labtec Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Labtec Computers & Internet

  • Labtec Computers & Internet

Most Popular Question

need windows 7 driver labtec 1200

  • Computers & Internet
Loading...