20 Most Recent
Kenmore Bagless Upright VacuumVacuum - Page 2 Questions & Answers
Light and brush roll stopped working on Kenmore cannister
There is a connector somewhere in the bottom that will have gotten debris and stuff in it. Unplug the power first then clean it all contact pins that transfer power. Compressed air works the best but the effect can be gained by using a toothpick. Clearing out the connectors should restore the power to the head. If one or the other stops then its a different problem. This seems to be a full failure in the elements of the head that require power. DO NOT WORK ON ANYTHING STILL PLUGGED IN!!!
How do i disassemble the extension wand on Kenmore vacuum
Typically that's not a good idea. They are not designed to be repaired and if you do manage to get it apart you will almost surely break the retaining tabs and won't be able to re-assemble it. Most Kenmores are made to last only a couple of years and fail in some way. Sears needs high volume and have these machines built poorly to necessitate you buying high volume.
My Kenmore Elite Upright Vacuum stopped working.
It might sound very easy , but lack of power is usually the cause of a vacuum cleaner that is not working . Check that the vacuum cleaner is plugged into a working power outlet and that fuses and breakers don't need resetting. An activated thermal cut-out due to a blockage is the next most likely cause of the problem.
Tripped Circuit Breaker/ Blown Fuse
Check service panel for tripped breakers/blown fuses. If breaker is tripped, reset it. If fuse is blown, replace it. If vacuum cleaner is plugged in, make sure that the power button is in the off position before having to reset the breaker/changing fuse.
Not finding what you are looking for?