Top 20
RCA 25201RE1 Corded Phone Questions & Answers
How do I set the
http://www.rca4business.com/products/pc/pdf/instruction-book/25201RE1.pdf
How do i check messages
You can download the manual at
http://www.rca4business.com/products/pc/pdf/instruction-book/25201RE1.pdf
Phone does not work
Yes you should be able to plug it, if your home as a RJ45 male jack pin out put for u to plug . pls check weather your phone has a RJ45 female port .
if not am sorry .
good luck
2 fax machines on 1 line
Once you place your both fax machine on same line you will keep getting this issue. Fax machine is waiting for a fax ring signal that your other machine is sending.
Shut down one machine when faxing or connect your alt fax machine to a different number this way you can send faxes when need to.
Need to connect phone and fax machine to one phone jack
You have the wrong adapter probably. Most common types are single line splitters and will not work like you want. They only split line one and 2 gets blocked out as they only have 2 copper connector on the plug centered to get line 1 only. If you want to use an adapter you will need a 2 line splitter like this one:http://www.trianglecables.com/tellinsplitl.html
A simpler solution is to plug your fax into your phone. On top of your phone are multiple jacks labeled L1/L2, L2 only or L2/data. Plug your phone into the wall using the L1/L2 jack then plug your fax into the L2 jack and this will work fine and still allow you use of line 2 on your phone. If you don't want to hear the ring then set your fax machine to auto answer. Hope this helps you.
What do I buy to use 2line phone and separate fax?
You can buy a 2 line phone, but to use the fax/dsl line for voice, you will also need a line sharing device.
"The stick" is a good brand....
All it does is recognize if an incoming call is a fax or a voice call. If fax it would go to a fax port on the stick. If voice, it comes out the voice port which you can call on.
The same rules apply to this line....if something is using it, the next call will get busy......But now you could have the phone company "Hunt" your line 1 to line 2 (fax/dsl) if line 1 is busy.......hence...2 incoming lines....
Changing displayed time on the phone
Thanks for that tip on removing the battery. I removed one for about five seconds and when I reinstalled it, there was no time displayed at all. A quick call from my cell phone, and the phone now shows the correct time. (Of course, now I wonder: would calling from my cell WITHOUT removing the battery first have had the same effect?)
How to connect the telephone lines
Please let the fax line be connected to computer itself do not remove , In the DSL line you get a splitter which the lines for phone and ADSL modem connect the splitter to DSL Line and from the Splitter you 2 o/p ports with phone marking or symbol connect the phone line to it and to line port connect the main 8957and then to ADSL line to ADSL modem from the ADSL modem connect to lan port which is behind the computer (not to dial up modem
i.e is fax line ) or the usb port in the computer ...
Good luck...
Line 2 indicator is flashing
Usually it would flash if you only have one line attached. Most times their is a switch on the side to select one or two lines
My cvp-6000 could not locate
Make sure you go to configuration and set the phone to dhcp and nat model, allso make sure the internet is working and is higher than 128 kbps. For more info visit myacn.com/digitalphone/support
My speakerphone doesnt work on my 25423re1-a ,but my handset does work ? how can i fit it , thanks Ben Brazzell
Ensure that the speakerphone feature is not disabled. Some phones have a dedicated button or an option in the phone menu to enable or disable the speakerphone. Look for this option and make sure it is turned on.
Or Reset the phone to factory settings. Refer to the user manual of your 25423RE1-A phone for instructions on how to perform a factory reset. Keep in mind that this will reset all settings and may delete any personalized configurations.
Not finding what you are looking for?