20 Most Recent
Everex StepNote NC1502 Notebook Questions & Answers
Lost my adapter (65w), bought a universal laptop adapter but it is rated at 90w. will this work for my everex stepnote nc1502?
Correct voltage Greg?Then yes it will workMore Wattage means more Amperage.Same voltage, but more Amperage(Voltage times Amperage = Wattage )KEEP the inside of your laptop CLEANMake sure you occasionally replace the Thermal Paste on the Processor (CPU), and Thermal Pad on the graphics chipset. (GPU)Service Manual for disassembling the laptop?Everex is out of business (To my knowledge), and I see no service manual available.I should be able to step by step you through it, anyway; if you desireRegards,joecoolvette
My computer is slow
If you have a virus program installed, it is most likely is running a scan on your hard disk. It can slow down your computer especially if you have a large hard drive. To make your computer (hard disk) lean and mean, uninstall any programs you do not use. Also you need to maintain your hard disk by running Disk Cleanup this will remove old temp files and old compressed files etc. This will reduce the number of files the virus scanner has to scan. Plus running Defrag. this makes your files contiguous so the system can access files off the hard drive quicker because it does not work as hard.. Disk Cleanup and Defrag should be carried out at least once a month. If you have 512Mb of RAM installed then installing more RAM will speed up your computer. After installing your graphics card, you may need to disable the built-in graphics card in the BIOS for the new graphics card to work properly.
Need to put os on computer
Which version of Windows do you wish to install?Do you have a Windows installation CD and the product installation code?
Need Everex device drivers
be very carful many sites related to Everex are linked to a bad links and you need to use Firefox to scn them for oyu before you get in...you may find a site soon as I heard that they are trying to get one up next week
Videos play slow or broken
For how long have you been facing this issue ? If it's for a long time then it may be that you no Display driver installed in you Laptop. To check that you have installed the graphic Driver Please right devmgmt.msc As shown in the pic below and check if there is some information available in the Display Adapter ... if it say's default driver etc. Then you must need to install the display driver.
And 2nd: but in Rare case you can increase the resolution of you display setting to maximum and try to playing the movie.
Please rate and vote if you find this solution is helpful and reply back if you need more details or help.
I need to change my screen its broken
I've swapped out literally hundreds of lcds and it's always the same deal.
Remove all the screws from around the lcd outer casing, remove the plastic frame, remove the next row of screws, unplug the lcd cable to the lcd, find the part numbers on the back of the lcd and find an exact match on ebay.
If you search by that part number usually you'll save big time since most people will typically type: nc1502 lcd and the sellers know this so they'll jack up the prices ;)
Laptop will not power up
1. Test power adapter for output voltage. Bend the power cable in various directions while doing this to be sure that there is no broken conductors in the cable.
2. If power adapter is Ok, connect it & see if the power LED on the laptop will glow when you jiggle the power connector in various directions. If yes, then the DC jack might be loose or damaged, & need to be either re-soldered or replaced.
3. If not, then disassemble the laptop. Remove any components that attach to the laptop's motherboard first (e.g. battery, hard drive, RAM, wireless card, optical drive, ... etc.)
4. Next, remove the keyboard & the LCD screen.
5. Finally, unscrew all screws that hold the upper cover & lower cover together so that you could gain access to the motherboard.
6. Inspect the solder points connecting the DC jack to the motherboard. Make sure that none of them is loose. If any, re-solder them.
7. Inspect the center pin in the DC jack. Make sure that it is not broken or loose. If it is, then you might need to replace the DC jack.
8. When you are done, re-assemble back the laptop.
What will happen to a refurbished windows XP
on the pc using safe mode(press F8 when starting) you can access through administrator account and then go to control panel>useraccounts>desired account> remove password
and so you can remove the password
Computer appears to be in
For that you need to disable hibernate.
When you power up the computer press F8 key 5 to 6 times then enter in safe mode then go to control panel ->power option ->Hibernate disable it then apply.
If you are unable to enter in safe mode then enter in enable vga mode then change screen resolution to 1024*768 in display property.
Let me know if you need further assistance.
Thanks for using FixYa.
Not finding what you are looking for?