Averatec D1002UHCE-1 All-In-One Intel Desktop PC - Intel Core 2 Duo E4600 2.4GHz, 2GB, 320GB, DVDRW - Answered Questions & Fixed issues
I have a Averatec D1002UHCE-1 All-In-One Intel
Google to see what are the mo bo specs for that unit and cpu upgrade. Quad core units have different sockets and will not fit into what you have. Check to see if you can go further that the 2.4GHZ intel core 2 duo - those chips pack a lot of bang for the buck.
And upgrading ram does not add speed to a computer. All is does is to help minimize the speed loss that occurs when you put the chip under load - similar to the rpm reduction of your car motor when you slip it in to drive from park. Capiche?
3/3/2017 3:01:22 AM •
Averatec...
•
Answered
on Mar 03, 2017
•
214 views
How can i add monitor with hdmi cable to an hP all in one computer
Hello Anon,
I believe your P.C. has a DVI socket on the back, if it is a DVI-D, it only carries digital signals. If it is a DVI-I socket, it carries both digital and analogue signals, either way, you need to get a DVI-to-HDMI adaptor, (Ebay or Amazon), connect it to the DVI socket on your P.C. then plug your HDMI lead into it and the monitor.
Regards,
Ron.
6/9/2014 4:24:18 PM •
Averatec...
•
Answered
on Jun 09, 2014
•
58 views
D1002
It could be internal where the power cord plugs into the all-in-one. If there are no lights at all when the power cord is plugged in then most likely that might be the problem. It could also be the motherboard inside the all-in-one. Hopefully there are some blinking lights or beeps when the cord is plugged in. If so, they tell the technician what the problem is.
4/30/2015 12:03:25 PM •
Averatec...
•
Answered
on Apr 30, 2015
•
134 views
I need to turn on system restore. How?
- Open System by clicking the Start button , right-clicking Computer, and then clicking Properties.
- In the left pane, click System protection. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
- Under Protection Settings, click on create restore point... and follow the instruction on screen..... Thanks for using fixya!!!!!
2/27/2014 4:05:28 PM •
Averatec...
•
Answered
on Feb 27, 2014
•
51 views
My wireless keyboard doesnt work
Is it charged? Make sure you have a full charge on the batteries of the keyboard, and make sure you WiFi on the computer is functioning. Pairing the keyboard and computer should work then!
1/25/2014 11:28:21 PM •
Averatec...
•
Answered
on Jan 25, 2014
•
44 views
Graphics card
Try uniblue driver scanner and the driver get updated
be happy
11/21/2013 11:04:53 AM •
Averatec...
•
Answered
on Nov 21, 2013
•
215 views
Wireless flash drive keyboard for acer aspire z5600
Dear
Go to device manager uninstall the device and reboot it. At next boot it will install driver it self.
Still it is not working remove batteries and replace them
all the best
Keyur Shah
11/19/2013 2:06:43 PM •
Averatec...
•
Answered
on Nov 19, 2013
•
52 views
How to reboot
Its not call rebooting, its called recovery. Normally in computer you have a recovery key or you have a recovery option on computer or you are provided with recovery CD. With the help of these things you can recover your computer to earlier settings. For further assistance mail me
[email protected]
7/6/2012 10:53:37 AM •
Averatec...
•
Answered
on Jul 06, 2012
•
56 views
Not finding what you are looking for?