Top 20
Kodak EasyShare V1073 Digital Camera Questions & Answers
Kodak camera will not stay on
The battery itself may be defective sometimes the factory sends out a bad unit. Call customer service from were your battery was purchased and inform them of your problem...
New camera not working kodakeasyshare c182
"new camera"??...... take it back to the shop and buy something else (not Kodak..... and certainly not a "easyshare"..... so many problems and faults and Kodak won't help you..... notice i didn't use the word "support")
Card memory unprotect
SD cards have a slide switch along one edge. The position farthest from the metal contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card.
Remove memory card protection
SD cards have a slide switch along one edge. The position farthest from the metal contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card.
I hav kodak easy share
Here's the page from the extended user guide:
http://resources.kodak.com/support/shtml/en/manuals/urg00964/urg00964c3s2.shtml
Kodak V1073 Digital Camera lense
The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the
probability is that you will have to get it fixed by a professional. Use
these at own risk as it may further damage the camera. Firstly,
try connecting your ac adapter or usb cable. Try holding the
shutter button while switching on the camera.
Look at the lens,
and if some of the lens 'circles' is misaligned or not concentric then
try wiggling it (while holding camera lens down). Try gently
pushing or pulling the lens when it extends but this is risky as it may
cause the lens barrel to slip out of its guidance system.
If your camera
is still under warranty and has definitely not been subject to misuse
then contact the Canon service department in your country to find out
about a free repair (but as your camera has been dropped this will not
apply). If
the warranty has expired though a professional repair will far exceed
the
cost of replacing your camera. You will therefore have nothing to lose
by
trying to fix this yourself.
You can also have a look at THIS link.
Hope helps.
Can I recharge V1073 Kodak
This camera can be charge by connecting to a computer USB port so no need for you to use AC adapter to charge it, but its stll handy that you have a AC adapter just in case.
How do you unprotect pictures to delete
While viewing the particular locked photo, press the Menu button and select Lock/Unlock to toggle. Your camera's menu might also call it Protect/Unprotect. Hope this helps!
How do you get the
Look at your memory card. SD cards have a slide switch along one edge. The position farthest from the contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card. If the switch is already in the proper position, slide it fully the other way and then back again.
My camera worked before by
Consider NOT connecting your camera to your computer.
The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.
Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program.
Where is that switch to
On the card itself (the tiny slide switch on its side). There are several possible causes for "memory card locked", "memory card error", or "no memory card". Some include trying to use of a 4GB SDHC card with an older camera made before SDHC format came out. Others include problems with the tiny slide switch on the side of the card, or the electrical contact switch internal to the camera. The problem may also arise from simple formatting problems if the card has never been formatted in the camera (note that this will also erase the card). Troubleshooting tips for this problem may be found
at this link.
Not finding what you are looking for?