Top 20
Samsung L200 Digital Camera - Page 4 Questions & Answers
Charger flashing orange
If you have an extra batt?try to replace the battery then try to charge it again if flashy orange still appeared on the usb cable.,Maybe the usb cable have a problem due to broken pin.visit the service center near you.
How can i transfer my
Welcome to FixYa.
One possible reason is that your memory card is not yet formatted for camera use.
Image or recoridng will be automatically be saved in your memory card, if card is inserted. If not, it will be saved on your internal memory.
Second reason is it is in write protection.The SD/SDHC memory card has a write protect switch that prevents image files from being deleted or formatted. By sliding the switch to the bottom of the memory card, the data will be protected. By sliding the switch to the top of the memory card, the data protection will be cancelled
Before taking pictures you have to slide the switch to the top of the memory card.
Please let me know if you have any questions and if this solution was helpful.
Thank you for using FixYa.
Am on an xp pro
Do you really need to hook your camera up to your computer?The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as
Picasa.
How would i know when
you can know if the camera is charging by the indicator light in the usb cable, green light means it was full charged..red light means that unit still charging.
Conecte la camara al equipo
Hola desconozco si tu camara posee picture bridge,pero debes de revisar el setup y confirmar la configuracion USB mass storage debes seleccionar.De otra forma si esta seleccionado picture bridge o imprimir te va a solicitar la presencia de un impresora.
Saludos
Cant use as it says
Look at your memory card. SD and SDHC cards have a slide switch along one edge. The position farthest from the contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card.
My pictures are coming out blurry and i didnt drop
Make sure that the camera is set to auto-focus. It is possible that the camera was put on manual focus and now each picture is taken out of focus resulting in blurry pictures. This setting shuld be found in the menu settings or on the back of the camera. Check in the menu options first. Let me know if this does not work. Thanks!
Turn on camera the zoom
Hello
The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the
probability is that you will have to get it fixed by a professional.
Use
these at own risk as it may further damage the camera.
Firstly ,
try connecting your ac adapter or usb cable.
Try holding the
shutter button while switching on the camera.
Look at the lens ,
and if some of the lens 'circles' is misaligned or not concentric then
try wiggling it (while holding camera lens down).
Try gently
pushing or pulling the lens when it extends but this is risky as it may
cause the lens barrel to slip out of its guidance system.
Another
way to do this is to place the camera lens down on a hard surface and
then power it up. Be sure to use a soft cloth or something similar as to
not scratch your lens or casing. Let the lens push the camera up and
down a few times and sometimes the little resistance provided by the
camera is enough to get things going again.
Try hitting your
camera near the lens on the body with the soft tissue on the palm of
your hand.
Other than that , I would take the camera to a repair centre for a evaluation to see if it would cost more to repair than to
replace the camera.
If it is still under warranty I would suggest
you take it in before trying any of these steps and remove any
off-brand batteries or accessories as some stores are really fussy about
warranty repairs on camera's with non-brand accessories.
You can also have a look at THIS link.
Hope
the advise is useful. please do not hesitate to let me know if you need
any further assistance. Also, please be so kind to let me know if you
found this helpful.
Regards
Andrea
I keep getting the message
That means you haven't installed the driver software.Please try after installing the driver software.If you have no driver software then go to the official website of Samsung.Then select your product.Then click driver download.
The Lens is stuck and
maybe your camera had a problem on hardware.,try to pull the camera out if the display appeared.,the turn around of the gears malfunction,you can contacted the authorized service center for us to know if you need to replace the barrel assy part of the camera.,
My Samsung L200 does not turn on anymore while
It may be the battery has failed or isn't charging, have you charged it? Try taking out the battery and connecting to usb, does that change things? If so you should charge or replace the battery.
The picture so blurry,the auto fucos does'nt
the camera is supposed to do this HMM try to put it in MACRO mode or super macro or whatever take a picture the camera should focus and then take AN AMAZING picture if its in normal mode try to switch the picture to fine please leave a testimony if this helped you
How do I charge the
you have the usb cable and adptor right??connect the adaptor and usb then insert it to the camera then plug in to the ac line..but takenote.,the battery was inserted tot he unit..
What do I do when screen says file error
file error appear on the camera because of corrupted file or virus attached in the pictures due to incomplete saving or virus attached on mmc upon conncting to the pc. "dont panic". the first thing to do is back up your pictures to your desktop or laptop. then the next thing was format the memory card.After reformatted insert the mmc to the camera then take atleast 15 pictures and try to preview it.
If same problem occured, try to contacted the service center near you.
hope it will help..
I have a Samsung L200.
Yes you can,but the other icon will remove too,due to the program install to the camera.,try to press the upper button,near at the menu.,thats the osd.,(on screen display), But if you dont want that you can change the date and time to the settings of the camera.,
I need to upload video from camera. I put the
maybe you experienced this because off virus or a corrupted file.
* fisrt try to insert the mmc to the pc,when the mmc folder appeared
and no dcim folder appeared try to click the tools and folder options
then go to view,check the show hidden files.,if the folder already
appeared back up the pictures that detected by your computer to the
other folder.,and after you backed it up try to format it.,if the
formatting run normal.,then try to format the unit in the menu
settings,.after that youll need to insert the mmc again in the tl220
then take 2 to 3 pictures.,if you preview the 3 pictures then remove
the mmc to the tl220 then copy the pictures that youd been backed up.
*second if you inserted the mmc and the dcim folder was too none
highlighted like the other folder, press he right click go to
properties - unchecked the read only and hidden - apply - ok to the sub
folders and folder - ok..then reinsert the mmc to the unit.,then
preview the pictures.,
Not finding what you are looking for?