20 Most Recent Laser Canon imageCLASS 8180C Multifunction Printer - Page 5 Questions & Answers


Reset error code
in service mode

Laser Office... | Answered on Jul 01, 2016


If you wish to get some details; check the site linked here. Pull up older posts....
http://electro-medical.blogspot.com/

Laser Office... | Answered on Jun 04, 2016


This error occurs if you forget to remove both the shipping tape and the locks from the cartridge. Remove the cartridge from the printer and look for orange tabs. There should be three of them. If they have been removed then you may have a bad cartridge, try installing a different cartridge, if second cartridge fails then likely it is a problem with the printer.

Laser Office... | Answered on Mar 08, 2016


have you unplugged it and turned off the computer and restarted if essentially you have it hooked to it?

Laser Office... | Answered on Mar 07, 2016


The motor ratings are also required to help you , if it is a custom made motor then you have to obtain it from the equipment manufacturer

Laser Office... | Answered on Jun 22, 2015


Most likely you will need to replace the fuser. Try plugging the printer in to a different outlet than it is right now. If you get the same error then you can be pretty sure the fuser is bad.

Laser Office... | Answered on May 22, 2015


Dera
Open the back cover, at main controller PCB assy. you will find the HDD. disconnect and unscrew it . However the HDD is encrypted its very probably impossible to extract the data in case its used with canon.
Thanks.

Laser Office... | Answered on Mar 04, 2015


perhaps if you have never set one then you can go on without any set in the system have you tried that yet.

Laser Office... | Answered on Feb 26, 2015


Dear
As the OS is different do load the driver at vista pc.
Thanks.

Laser Office... | Answered on Feb 24, 2015


First, check the fuser. It should be hot to the touch (be careful).

Laser Office... | Answered on Feb 12, 2015


Dear You can choose any printer having printing resolution more than 600 DPI. For screen printing the jobbers prefer for resolution from 300 DPI to 600 DPI.
Thanks.

Laser Office... | Answered on Jan 16, 2015


Dear Rajendra
You can choose any laser printer with printing resolution 600-1200 dpi. According to the type of toner non-magnetic toner will perform the best and lasts long without deterioration of its color. Before buying the choosed model you may download the driver and verify the setting procedures to confirm. Also if you are going for prepare for master the driver setting should have option for lower the dpi up to 300 , in case of screen print application. Few manfs are hp,canon used magnetic toner where as samsung,brother,konica minolata etc. are used non-magnetic toner on their low/ middle segment.
Thanks.

Laser Office... | Answered on Jan 13, 2015

Not finding what you are looking for?
Laser Canon imageCLASS 8180C Multifunction Printer Logo

Popular Tags

31 questions posted

Ask a Question

Usually answered in minutes!

Top Laser Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

Barbat Nae
Barbat Nae

Level 3 Expert

509 Answers

Scott Kalvinek

Level 2 Expert

56 Answers

Are you a Laser Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Laser Office Equipment & Supplies

  • Laser Office Equipment & Supplies

Most Popular Question

system error e000 canon image class

  • Office Equipment & Supplies
Loading...