20 Most Recent
Sanyo Katana® II Cellular Phone - Page 8 Questions & Answers
I forgot my keypad lock code for my sanyo juno
yot.
Morning to youIf your service provider can not give you the code.What I would suggest is to find on the internet something called Spotman th which is a password and a keyfinder.I got the trial version (that way you do not have to pay for it) and it worked for me. I have not tried phones.Hope this works out for youKolbrun
Where can I find the pairing code
Well I know for sure the default pin for the M1 is indeed 0000. However I
cannot tell you what the pin would be for your specific bluetooth
dongle. If I where you I would try 0000, 1111, 2222 and so on
I need to know the bluetooth pairing code for sanyo M1
Well I know for sure the default pin for the M1 is indeed 0000. However I
cannot tell you what the pin would be for your specific bluetooth
dongle. If I where you I would try 0000, 1111, 2222 and so on
-
As with all Bluetooth headsets,
the H700 needs to be paired with the device before it can be used, which
is done in pairing mode. In pairing mode, the H700 makes a transmission
so that Bluetooth-enabled devices can pick up the device and connect to
the headset. Once connected, no other device can connect with the
Bluetooth headset. To enter pairing mode on the H700, open the headset
boom located near the microphone. After a few seconds the indicator
light will turn purple. Once purple, the H700 is in pairing mode.
Searching for the Device With the M1
-
Once the H700 is in pairing
mode, have the M1 search for Bluetooth devices. To do this, press
"MENU/OK" and choose "Tools," "Bluetooth," "Add New" and "Search." A
list of Bluetooth devices will show up on the screen. Highlight
"Motorola H700" and press "MENU/OK." Choose "Add to Trusted," enter
"0000" and press "MENU/OK." The devices are now connected and ready to
be tested.
Testing the Devices
-
Once the devices are connected,
test that both the phone and the headset are working properly together.
First, place the headset in your ear. Dial a number on the phone and
press "Send." If you can hear ringing, the devices are connected
properly and ready for use.
If the connection was not successful, repeat the previous steps and
try again. Make sure the indicator light is glowing purple and is
steady. If you have connected the headset to a previous device, make
sure that device is turned off so as not to interfere with the
connection procedure. Once the other device is off, close and reopen the
boom to enter pairing mode.
Tried to unlock fone to many times
you need the phone PUK number that comes with the phone not the one on the sim card ,when you get it sorted programme the phone so you dont need a pin number then you cannot forget it
Locked out of phone
PUK stands for Personal Unblocking Key. This is a uniqueeight-digit code specific to your SIM card. This is required when the PINnumber to unlock your mobile phone is entered incorrectly 3 times. You are thengiven 10 attempts to enter your PUK code. If an incorrect PUK code is enteredafter the 10th attempt, you will block your SIM card permanently and willrequire a new SIM card from your mobile phone provider.PUK codes can be obtained through the following ways -The PUK code is in your SIM card documentation Starter Pack.If you do not have this then -Please contact your phone service provider.Your cell phone service provider can give you the PUK code once you give themyour account details and they have confirmed your identity.For details to obtain the PUK code for the SIM card, pleaseclick on this link and follow my instructions.
http://www.fixya.com/support/r5705889-puk_code
Unlocking a phone
There are many methods to unlock mobile phones among that codes are the best way because its easy and safe for your mobile.........Get the unlock code for your sanyo model mobile here
Classicunlocking.com , it gives the easy methods to get your mobile as unlocked.........
Not finding what you are looking for?