20 Most Recent Acer Veriton M460 Micro Tower Core 2 DUO E4500 2.2GHz Dvdr GigaBit Ethernet Wvb VM460UD4501 PC Desktop - Page 4 Questions & Answers

check the power source there might be a problem with the power supply and also clear the cmos

Just remove any add on drives & check the system.

if you pick up a network card from your local pc store, you can either remove and replace your existing one (if it is removable) or just insert it into one of the spare slots on your motherboard after removing the blanking plate.

you don't write any details.BSOD can be two things hardware or softwareproblem.sometimes microsoft update.try to think back to then it begun,did you install any new software,or hardware.

you got a faulty hard-drive.

First check that your RAM is good if it is then just fit a graphics card.

what is wrong you have to give moore details than CMOS-setting is wrong.

Yes, if you have a removable graphics card fitted. All you have to do is find one that fits. As the system has a socket 775 cpu it most likely has a PCI-E slot. So just look for one that fits. The Graphics on the standard system is integrated(part of the motherboard) So you don't even haver to remove the old one.

Step 1: There are a number of possible causes for BOOTMGR errors, including the most common "BOOTMGR is missing" error message. The most common reasons for BOOTMGR errors include corrupt and misconfigured files, hard drive and operating system upgrade issues, corrupt hard drive sectors an outdated BIOS and damaged or loose IDE cables Anothe reason you might see BOOTMGR errors is if your PC is trying to boott from a hard drive or flash drive that is not properly configured to be booted from. In other words, it's trying to boot from a non-bootable source. This also would apply to media on an optical drive or floppy drive that you're trying to boot from. make sure there are no disks in cd floppy usb drives Test all power and data leads that attach to your hard drive IDE,SATA the leads from your ((MOTHERBOARD TO YOUR HARD DRIVE)) make sure they have a secure dust free connections and are not faulty or just replace them they could be faulty if its a flat ribbon 40 pin IDE it will be the fist to fail Make sure all power and data leads that are attached to your drives dvd\cd have secure connections and are not faulty or just replace them they could be faulty a computer needs Data and Power to travel through every working device and to continue its cycle and to have an end so any faulty leads will end up with a computer error. also make sure you have set it boot from you hard drive in BIOS Restart your computer and enter BIOS mode. On most computers this is done by pressing the Delete ot F2 key but will vary depending on your computers bios other keys Acer: - Ctrl+Alt+Esc , ALR PC: (F2) or (Ctrl)(Alt)Esc) , Award BIOS: (Del) or (Ctrl)(Alt)(Esc). Scroll over to the "Hard Drives" tab, and make sure your computer has the hard drive assigned to be on. Often during BIOS you can select auto-detect or change options with your hard drive to make sure Windows can recognize it. Once you've selected your desired options, continue to boot.

Reset the wireless device to factory default settings. Then reconfigure the SSID and Security code.

the data cable of monitor may gone loose, needs to fix properly. els the monitor gone out of order

Is this a Windows 7 OS upgrade? what OS was the machine before upgrade?

Are you using Vista as o/s, Try restore to a time when it was working

depending on what model it is either on the motherboard or a separate card internal. but you might want to check this firststart buttoncontrol panelsystem icondevice managergo to network interface listingcheck to see what's thereif a ? mark on that item, highlight with left clickuninstallrefresh that screen at top leftthen scan for hardware changes might do the tricklet me know your results

Monitor is working fine so... Check on the CPU... You might see it running but not. While the PC is OFF and power cable is disconnected, try removing the memory and clean it with pencil eraser, put it back carefully, check also vga / pci cards then turn it back ON... that will work.

Do you hear the fans running? Do you hear the hard drive spinning? Did anything ever appear on the monitor? Remove the Power Cord, Open the Case and remove one of thememory chips. Set the chip aside then try rebooting the computer. If it boots, then you know the memory chip you set aside is bad so mark an x onit with an ink pen. If it fails to boot then move the chip to the nextmemory slot and try rebooting. If it fails take the chip out and set itaside, then put the other chip in and try booting it in both slots. If itboots, just to verify that the chip set aside is bad, mark an x on it and putit into the open memory chip slot and try booting.

Intel[R]G41 EXPress chipset[vendor id=0X806,device id=0x2e32]