20 Most Recent HP LASERJET P1006 Printer - Page 9 Questions & Answers

Usually a failed formatter is the problem on smaller printers where they will not come to ready. Try disconnecting any data cables going from your computer to your printer and restart. If it comes to ready, you might have a corrupted print job stuck in the print spooler. If it does not come to ready when not connected to a computer then the formatter is done.

HP LaserJet... | Answered on Jul 21, 2018

49=Firmware error..........
Recycle the printer power (off/on). Test.
Switch off then disconnect all printer cables.
Recycle the printer power (off/on). Check Err.
Switch off and Reboot PC.
Connect all and test.
Try another app to print from.
Try print a different file.

HP LaserJet... | Answered on Jul 10, 2018

The fuser may need renewal.
This is the 'heated roller' that melts the toner powder into the paper fibers.
A techie needs to check and renew.

HP LaserJet... | Answered on Jul 10, 2018

A problem with installation or functioning of the black cartridge

HP LaserJet... | Answered on Jun 29, 2018

problema 49.38.07 color LaserJet cp5525

HP LaserJet... | Answered on Jun 02, 2018

just happend, today, yesterday was ok, same setup?
or just got this from a garage sale and ...
or found it or barrowed it or >? tell the story please.
no PC stated
no OS stated (windows what?)
to run a printer on USB the printer needs to be reset first.
to USB mode, this is covered in the manual, lost that?
the USB port needs to be working , try them all/?
the HP software needs to be loaded too.
omg its 14 years old today. click software and then click change.
then pick your UNSTATED OS,in the huge list of operating systems this printer supports even up to w10


HP LaserJet... | Answered on May 25, 2018

that means it needs service
ask for help at real HP.com
here. free to ask and best way to get help, DIRECTLY.


HP LaserJet... | Answered on May 10, 2018


HP LaserJet... | Answered on May 04, 2018

Go to your menu and pick that cassette out and make sure it is set to the proper size envelope. ten to one it is not os it shows a jam cause it is looking for another size.

HP LaserJet... | Answered on Apr 01, 2018

optical unit is defective: Reconnect the connectors of the laser driver pca (j501) and the dc controller pca (j108, j109). If the problem is not solved replace the product. Per the service manual

HP LaserJet... | Answered on Mar 01, 2018

Not finding what you are looking for?
HP LASERJET P1006 Printer Logo

134 questions posted

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts


Level 3 Expert

13434 Answers


Level 3 Expert

1997 Answers

Cindy Wells

Level 3 Expert

6112 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

LaserJet HP

  • LaserJet HP

Most Popular Question

print manual feed

  • Office Equipment & Supplies