20 Most Recent Brother MFC 7840W Printer - Page 2 Questions & Answers

please call on toll free 1-877 213 6551 for support.

A quick solution is to select a different type such as Arial or even Arial Rounded Bold.

You need an OCR program (optical character recognition)

Check out this site for programs and more detailed help:

http://www.makeuseof.com/tag/top-5-free-ocr-software-tools-to-convert-your-images-into-text-nb/

As for how to save jpeg to pdf, you may need an image to pdf conversion solution. Check out these articles related: Convert Image to PDF and append image to PDF in NET pqScan com How to Convert Image to PDF

Most of the time you will need to replace the drum with an OEM. Good Luck! JP

The wire is on the drum (where the toner cartridge fits in). The green or blue piece slide cleans the coroner wire.

• Open the door on the front of the printer.
• remove the drum/toner from the opening pulling out and lifing up slightly.
• remove the toner cartridge from the drum unit. (press green level to release.
• insert toner cartridge into the new drum unit

link for general printer help : http://www.brother-usa.com/support/ModelInfo.aspx?R3ModelID=MFC7840W#.VNkfGfnF-RY FAQ with instructions on drum replacement. Frequently Asked Questions

Several printers are connected to my Dell and sometimes without paying attention I forget which printer I'm using. On your print set up page scroll down until to your printer and select it. If you have only one printer, then select it as your default printer.

This can be tricky. First of all only try to fix a scanner when you're in very good mood, otherwise you'll brake the parts. Trust me on this. Have a good flash light, disconnect the power cord (very important), open every place where the paper runs. Go easy because you're dealing with cheap plastic parts that can easily break. If a door doesn't open don't push it. With the flash light inspect every single inch where the paper runs. Probably you did this before, doesn't matter, do it again. You are searching for small piece (s) of paper that is entangled around the rollers. When you find one grab it with long tweezers. Be gentle, try not to tear it apart, and keep your fingers out of there. If the paper is between rollers and doesn't move try to rock the roller like paper passing through. Again, be gentle, don't force anything. When you are sure every part is clean, repeat the operation one more time (I told you to be in a good mood). If this doesn't work take the machine outside - or place at the garage. Open the paper tracking places and blow compressed air. I use a yard blower. Good luck.

1. lift lid and open front cover2. press clear/back. "Replace Drum?" will appear on the screen.3. Press "*00" it will then read accepted and the toner low error (Endof Toner Life) should go away.4. close it all up and your done.

print out a configuration page

When you print duplex, please tick the box at the print pop-up for 'print both sides'

Corona wires are in the drum cartridge, small screen or grid over them. usually there is a colored slide that you can move back and forth to clean coronas.

did you tried this ?

There are many questions and answers related to Scanning, If you mentioned how you would like to scan, eg, Scanning using the Brother software or scanning using windows/mac utilities, I can help you better. Anyway, here are few scanning related tutorials, please click this LINK and select whatever tutorial/s you wish to go through.
To scan using the Brother Control Center, follow the instructions given HERE. And THIS is the tutorial about how to scan without using the Brother Control Center application.
Hope this helps.
Let me know if you need further help.
Good Luck.
Thanks for using FixYa.

.There is a service update for that model. http://support.brother-usa.com/VirData/Product_Documents/Technical/Service%20Updates/SU_F1397.PDF Let me know if this helps at all.

How was the document received by the printer, fax, from computer, from flatbed scanner or document scanner?