Dual Electronics XDM6350 Car CD/ MP3 Player - Page 4 - Answered Questions & Fixed issues

Settings -audio-scroll down to the subwoofer option

Your code is 64324

Contact the manufacturer or an ICE dealer, who stocks that brand, maybe they can assist you

contact dual,THEY ARE THE ONLY ONES WITH THE CODE

check your wires and if those are fine your amp has a problem. could be a number of things inside the amp. sell it on ebay and buy a new one. could get $10-$30 for it if its not a crap amp

Hello James, Try these following websites: www.tigerdirect.com (Formerly: CompUSA) www.frys.com (Fry's Electronics) I hope the part(s) is still available. Best of luck. Regards, WMWZ

You must get the wires to the sub's terminals. Drill it and silicone the wire trough the hole or get a terminal connection to put in the box, hook the sub to the internal side, the wires from the amp to the box on the exterior side. Looks cleaner but it's a bigger home, little extra work and a little extra $

Dual is a brand that has had serious issues with Quality. I Sorry to inform you of that but I used to buy and sell stereo for over 20 years professionally and I bought their first line of dvd players about 12 or more and had to send everyone back to mfg for several problems.your problem (if it is a flip motorized screen ) is the ribbon cable is bad but if you don't have a lot invested and can't get your money back I suggest Planet Audio for a less expensive brand. I still sell so you can contact me at [email protected] and I can get you a price. Good Luck !

your question is not clear?

Wiring the voice coils and speakers both in parallel like this:
http://imgur.com/furO9yh
will be stable at 1 ohm mono.

Wiring the voice coils in series and the speakers in parallel like this:
http://imgur.com/jHSvmVU
Will be stable at 1, 2 or 4 ohms mono

I'm guessing ur subs are 4ohms by the way

The Crutchfield web site can be very helpful on these. Here is a link: Find the car audio gear that works with your Toyota Land Cruiser Not a 2013 but this video may help as well.

Two speakers will be connected to each channel in a parallel configuration.

Bigger problems. Direct short somewhere.

First thing to try is to shine a light on it to see if there is an image that is there that you can see. If there is, the back light or the inverter is out. Let us know,

It sounds like you blew a fuse or the circuit relay. When installing aftermarket decks they should be wired independently and on there own fuse. Disconnect power to the deck and replace the circuit breaker or fuse to the flashers

sounds like you have the two wires red and yellow mixed up. you want the memory to be constantly on so then the memory cannot be lost, and the red accessory to be switched on when the ignition is in the on position.The ignition, if on will allow your stereo to begin running.

after inslling my dual xd1225 stero i turned it on and i can here it but it has static over the sound

Does what fit into which model 2001 Mazda?

Attach the parking brake wire to a toggle switch and chassis ground. That way you can flip that switch and simulate the parking being applied, released and applied. Then you can watch movies, text, chat, etc., all while you're supposed be to being driving.

You can try attaching the parking brake directly to ground to bypass the issue. However, some systems require a change in voltage each time system is powered down. If this is the case, you can place a toggle switch inline with the parking brake wire, attaching one side to the wire and the other side to ground, allowing you to apply the ground and remove it when necessary.