20 Most Recent Kenwood KDC-MP238 CD Player Questions & Answers

I have a Kenwood KDC-MP238

More than likely, the trucks are equipped with the Infinity sound system upgrade from the factory. This means there is an amplifier that will need to be powered up to create sound. Keep in mind, you will be amplifying an amplified signal and this can create issues. It would be a much better decision to bypass the amplifier. (Run new wire to the speakers.)

Kenwood... | Answered on May 18, 2017

2 Answers

HOW DO I INSTALL THE BLUETOOTH

you dont. does your kenwood deck support BT? then you can connect BT devices to it. like a cell phone ect.

Kenwood... | Answered on Feb 26, 2015

0 Answers

Por que aparece la palabra protec en mi auto

ese error se ignifica un corte a tierra en las lineas de bosinas o impedencia muy baja (< 3 ohm). el estereo apaga el amplificador interno para proctejerlo.

Kenwood... | Answered on Jan 17, 2014

0 Answers

Protec en mi pantalla de estereo

Kenwood... | Posted on Jan 03, 2014 | Be the first to answer

1 Answer

Standby mode

your question too brief, cannot get your point of problem.

Kenwood... | Answered on Nov 28, 2013

0 Answers

Como quito protect de mi estereo jvc

Kenwood... | Posted on Nov 13, 2013 | Be the first to answer

0 Answers

I hooked up my RCAs to the back of the deck and ran a remote the amps getting pwere but i dont know why subs arnt on?

Kenwood... | Posted on Nov 13, 2013 | Be the first to answer

1 Answer

No sound

check the fuse on the back of the radio. if it checks good then check for voltage to the yellow wire. the voltage should be constantly on. it should show 12 volts to 13.5 volts depending on the type of vehicle.

Kenwood... | Answered on Jun 22, 2013

0 Answers

Kenwood says check ssr

Kenwood... | Posted on Apr 13, 2013 | Be the first to answer

1 Answer

How to program

Follow the instructions on page 11 of this manual.

Kenwood... | Answered on Apr 02, 2013

1 Answer

How do it turn off demo mode kenwood kdc mp238 car stereo

Follow the instructions on page 12 of the manual.

Kenwood... | Answered on Mar 14, 2013

0 Answers

Kenwood KDC-MP238 turns on but no sound

Kenwood... | Posted on Mar 07, 2013 | Be the first to answer

0 Answers

How to pair bluetooth with kenwood kdc mp238 stereo

Kenwood... | Posted on Feb 25, 2013 | Be the first to answer

0 Answers

Por que aparese la palabra protect en mi kenwood kvt-512

Kenwood... | Posted on Dec 20, 2012 | Be the first to answer

0 Answers

Need code for kenwood car stero kdc-mp425

Kenwood... | Posted on Dec 19, 2012 | Be the first to answer

3 Answers

Kenwood kdc-mp238

I have the MP-283 Model and the directions are poor not doubt,
I too was also having trouble with the DEMO mode and clock adjustment.

I put the stereo in standby mode, then press and hold the control knob for 2 seconds, then release and press the bass boost/ menu button, this shold open up all the options of the setero by using the control knob up/down to scroll through the various adjustments.

Kenwood... | Answered on Nov 18, 2012

1 Answer