20 Most Recent Alpine iDA-X200 Car CD/ MP3 Player Questions & Answers

i would try reformatting your ipod to factory specs (can be easily done with itunes following the information provided at mac.com)

to reset the ipod, turn it off, then on -- then hold down the 'menu' key while pressing the center 'click' key until you get the apple logo. this just may solve the problem.

Alpine iDA-X200... | Answered on Jul 10, 2012

1) Press and hold Func/Setup for more than 2 seconds2) Using the Volume knob go to the sub function called General3) Then go to INT MUTE4) Then set it to OFF
This will sort your problem out hope this helps

Alpine iDA-X200... | Answered on Oct 15, 2011

support.alpine-usa.com/products/documents/OM_IDA-X200.PDF -
it is in manual above.

Alpine iDA-X200... | Answered on Apr 01, 2010

All you can really do is use a CD Player cleaner *one that uses fluid* run it thru a couple times and try a disc again. Clean your CD's with liquid car polish an a microfibre towel, it works wonders for new and old CD's. If it still skips, It needs to be pulled for repair. They just replace the transport, usually runs between 100-150 depending on the service center. Hope this helps.

Alpine iDA-X200... | Answered on Sep 24, 2009

tonite while driving on a bumpy road i had the dc error right after a big bump.

according to user manual,

one of your speakers connector got lose and is touching the metal body of the car giving a shortcut

-> check your speakers wiring

Alpine iDA-X200... | Answered on Jun 17, 2009

ipod shows its connected but no audio comes out

Alpine iDA-X200... | Answered on Jun 12, 2009

if i were you id go to alpine.com or go to google and try to find the phone number for alpine

Alpine iDA-X200... | Answered on May 25, 2009

Hello daweeksy115x,

You did not specify your install specifics, but the trouble is probably the head unit "remote turn-on" lead. Some head units will have both a power antenna and a remote lead. If you inadvertently wired the amp turn-on to the power antenna lead, it can cause the problem you described.

If you head unit does not have a dedicated remote lead, the best solution is to wire the amp turn-on terminal to a switched accessory 12V source.

Hope this helps.

Alpine iDA-X200... | Answered on May 25, 2009

It's a Bad SIRIUS Tuner. there have been lots. If it's in warranty, have it replaced. if not, you can still find that unit for around $50 from Crutchfield etc. Hope this helps.

Alpine iDA-X200... | Answered on May 22, 2009

Glad i could be of assistance.
Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

Alpine iDA-X200... | Answered on May 07, 2009

Hook up the remote wire from the head unit (grey w/ orange stripe) to the power antenna wire (blue) on the wiring harness adapter.

Alpine iDA-X200... | Answered on Apr 17, 2009

Not finding what you are looking for?
Alpine iDA-X200 Car CD/ MP3 Player Logo

30 questions posted

Ask a Question

Usually answered in minutes!

Top Alpine Car Audio & Video Experts

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you an Alpine Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Alpine Car Audio & Video

  • Alpine Car Audio & Video

Most Popular Question

dc error message

  • Car Audio & Video