20 Most Recent LG Original HBM-770 Bluetooth Headset Questions & Answers

Ebay has several that is where I got my replacement

Did you try 0000 or 1111 or 1234 or 2468?

universal codes are - 1234 or oooo or 9999

First, try '0000' (four zeros), which is the most commonly used code by the bluetooth manufacturers. If it doesn't work, switch to '1234'. Lastly, very few models use '8888'.
Hope it works for you.
Cheers! Carlos

Try 0000 as it is the default passkey for most devices.

hi
you can put 0000 on your cellphone and tell the other person with whom you want to share files to put the same number"

"both of you"ll should use the same it can be any number"

hi, default passkey is 0000.

Well, unless you personally changed it yourself, the defaults are 0000, 2468, or 1234. Google all the default keys for a bigger list.

Sorry to say but it is brocken! Sorry!

If the LG Tone Infinim HBS900 is not pairing with your Apple iPad, there are a few things you can try to troubleshoot the issue:

1. Check the Bluetooth settings: Make sure that Bluetooth is turned on and that the LG Tone Infinim HBS900 is in pairing mode. To put the device in pairing mode, press and hold the power button until the LED light flashes blue and red.
2. Check for software updates: Make sure that your iPad has the latest software updates installed.
3. Check for other connected devices: Make sure that the LG Tone Infinim HBS900 is not already connected to another device. If it is, disconnect it from that device before trying to connect it to the iPad.
4. Check the distance: Make sure that the LG Tone Infinim HBS900 and the iPad are within close proximity to each other. Bluetooth devices typically have a range of around 30 feet.
5. Reset the LG Tone Infinim HBS900: Hold down the power button for 10 seconds, release, and then hold it down again for another 10 seconds.
6. Reset the iPad's network settings: Go to Settings > General > Reset > Reset Network Settings.
7. Check if the device is in pairing mode, if not activate it.

If none of the above steps resolve the issue, you may need to contact the manufacturer or a professional technician for further assistance. It's recommended to check the user manual of your device before trying any of the above steps, as the process of troubleshooting the pairing process can vary depending on the model and manufacturer.

resolder one in

have you replaced battery? 1. charger is not working 2. battery is bad.

You can't use bluetooth headphones,

Believe this or not, I had the same problem. The fix... Cleaned out the ear wax from the hole that got packed in there on my first use. No kidding. Hope that solves our situation.

if check both voltage and current rating both are same no problem can connect

Take off the rubber earpieces and look down the holes to the speakers. Can't see the speakers? That is because there is a black sticker covering the hole. The sticker is actually a very fine mesh that is supposed to let sound through. But it gets clogged with earwax and other crud, which interferes with the sound. The mesh is probably supposed to protect the speakers, but what is the point if it kills the sound? I removed the mesh and my LG Tone+ sounds like new again. Maybe it will die a quick ***** from sweat and stuff, but I was going to throw mine away anyway, so even if it's living on borrowed time, I'm happy.