Starlite Nextplay Fashion iPod Docking Clock Radio NP109CR - Answered Questions & Fixed issues
Instruction manual
Which model ipod ??
In keeping with Apple's goal to make user-friendly,
streamlined products, the designers of the iPod built in easy-to-use reset
functions into each iPod model.
Resetting the iPod is similar to rebooting a computer as all
songs and data stored on the device stay there, and only temporary information
(such as which song is playing) gets reset.
Follow these steps to reset an iPod.
Toggle the "Hold" switch to the "On" position, then
"Off."
The "Hold" switch is the small sliding switch on
the top of the iPod.
Move it to the "On" position to show an orange
rectangle. Move it back to the "Off" position to show a white
rectangle.
Hold the "Menu" and "Center" buttons.
Press the 2 buttons at the same time for between 8 and 10
seconds.
Your screen will go blank and then boot up with a dark Apple
icon.
The icon eventually turns bright and brings you back to your
main menu once the reset is complete.
Check your iPod to make sure it plays properly. If the iPod
still does not work repeat the reset process.
Scroll Wheel and Touch Wheel iPods
Move the "Hold" switch from "On" to
"Off."
Press the "Play/Pause" button and the
"Menu" button at the same time.
Press both buttons together for approximately 6 to 8
seconds.
This initiates the self-running reset process.
Make sure the reset was successful.
If problems persist you may need to perform the reset
process once again.
iPod Nano
Move the on-off switch to the "Off" position that
shows the green strip.
Leave the iPod Nano in this position for 5 seconds.
Move the switch back to the "On" position.
Use your iPod Nano to
make sure the reset worked properly and all your music is intact.
8/7/2013 9:06:35 PM •
Starlite...
•
Answered
on Aug 07, 2013
•
186 views
I pods doesn't work after i remove it from radio
I had that same problem too and i had to take my i-pod back because my machine messed it up so thats probably what your going to have to do to the repair shop said that there was nothin they could do and I was better off taking it back and my docking station messed it upso I had to get another i-pod and a docking station-I hope you get the problem fixed
12/28/2009 8:28:06 PM •
Starlite...
•
Answered
on Dec 28, 2009
•
161 views
I have a nextplay cd boombox which is brand new and skips
The vibrations from the speakers are causing the cabinet to resonate. This resonation causes the lens to vibrate, distorting the pickup signal... I would recommend giving it a few hard slaps when it skips. if that does not work, then try to adjust the soud so that there is no bass at all if you can.... Else chuck it...
How do I change to degree mode on my porpo YH-2000
- Power Off: Turn off the device.
- Jumper Configuration: Locate the jumper labeled "S16" on the device. Initially, it should be connected to pins 2 and 3.
- Power On (Alarm+All LEDs Flashing): Turn the device back on. You'll see the alarm LED and all other LEDs flashing.
- Power Off Again: Turn off the device once more.
- Jumper Adjustment: Change the jumper configuration from pins 2 and 3 to pins 1 and 2.
- Finished: Your Porpo YH-2000 is now set to the desired angular unit mode.
If you encounter any issues, you can press the reset switch on the back of the device to reinitialize it.
Openfit Shokz battery replacement?
Question edited for clarity, typo and CAPS.
Question moved from Cars and Trucks category.
Claim on the warranty irrespective of how long you have had them. They charge $180 but they cost them $20 to buy from China. Package them up and send them tracked and ask them to replace the batteries.
How long is the warranty on AfterShokz?
While we hope you never need it, all new Shokz purchased from authorized retailers come with a two-year warranty that begins on your date of purchase.
Jan 11, 2019
https://www.google.com/search?q=Openfit+Shokz+battery+replacement
..
My roadking rk4000 wont charge. I turn it off to charge it but there is no indicator light at all, any suggestions?
Are you using the charging cables that came with it? That is a type C. Are you securely attaching the charging cable? A loose connection would keep the battery from charging. If you had a low battery, you would see a red light. That you have no light at all suggests there is no charge left in the battery. I'm not sure the reset will work with no charge which is why you ought to check the cables first.
But turn it off and then hold down the Multifunction button for 10 seconds to reset it. Then turn it back on and see what happens. If you can, test the charging cable on aother device. If you have another type C charging cable, try it, just to eliminate a bad cable. If these suggestions don't work, you may try the manufacturer's customer support.
Can f2100 remote work on my dishtv box?
The F2100 remote is not explicitly listed as compatible with the AerialBox T2100, I recommend using the remote that came with your AerialBox T2100 for optimal functionality. If you have any specific compatibility concerns, I suggest reaching out to Dish TV customer support for further assistance.
Audiosonic CR-06PL not changing time when following manual instructions.
Set Time Hours and Minutes: Press Time/12/24 and Alarm1/ON/OFF buttons at the same time for two seconds and it will start to blink the hour.
Press and hold the button for a fast setting or tap it briefly to increase the setting by one hour. Now set the minutes with time (press and hold) and min.
How do I set the Audiosonic clock? Set current time Press and hold the time button and simultaneously press the hour to set the hours in 24-hour mode .
Not finding what you are looking for?