Panasonic PT-AE700E Projector Lamp - Answered Questions & Fixed issues

8ft to 40.6 foot throw distance. Screen size is 40-400 inches.

Turn on the projector MENU- OPTION- LAMP RUNTIME- Press and hold the ENTER button for 3 seconds. Turn off the power. We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel, motherboard, powersupply ... with high quality and competitive price. any questions, feel free to contact me have a nice day! Jerry Lampdeng Limited

1,Check the fans ,whether the fan is running,when you turn on the projector 2,if the fans run, then ,check the lamp or lamp ballast We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel, motherboard, powersupply ... with high quality and competitive price. any questions, feel free to contact me have a nice day! Jerry Lampdeng Limited

USD150 for the Optical block for AE700 We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel, motherboard, powersupply ... with high quality and competitive price. any questions, feel free to contact me have a nice day! Jerry Lampdeng Limited

I had the exact same issue with my new Panasonic PT-AE700u bulb. I contacted the company I purchased it from and they authorized the removal of the tab. I used my Dremel tool to slice it off and the bulb ended up working like a charm.

If everything else fits fine...the door just doesn't close, check with the company you purchased the bulb from and see what they recommend. This sounds like a common issue with "OEM" or "Original" bulbs these days.

It's in the manual pages 51-52

Your problem is the optical block failing. This is very common with the AE700s. It actually happened to me once before and I had it fixed. After having it replaced, it was recommended I run my fan on high mode, run the lamp on low mode and change the back lit color to black from blue to help thwart the issue. The optical block fails due to heat stress from the projector. Doing the things above lower the heat and extend the life of the block. I have a perfeclty good optical block if you would be interested as buying them new are extrememly expensive.

It depends on a lot of factors -- how bright the area is going to be, the size of your screen, etc -- but you'll be roughly 9 to 14 feet from the screen for most settings.

I'm basing this on numbers for a PT-AE700U projector, as I wasn't able to find the AE700E.

Take a look at the ProjectorCentral.com projection calculator if you want to get precise about the distance for your environment.

But be sure to rate my fix as "Helpful" before you click that link! :)

Send me your email and I will send you one.

Seems printer driver not installed properly. Uninstall the driver, restart pc, install driver again, restart pc. It should be working now. For further help, see page 4-1 of user manual, using your laser printer. PANASONIC KX-P4410 OPERATING INSTRUCTIONS MANUAL Pdf Download ' ManualsLib

I would look here; https://typewriters.com/categories/typewriter-supplies.html If they havem't got stock, I am sure they will know where to get one from.

Various ideas here. You don't explain how you know it has electricity? It is likely to be the transformer or the motherboard, how far into it did you check with your digital multimeter? https://www.google.com/search?q=Panasonic+electronic+typewriter+will+not+switch+on ..

See problem solving on page 184 of manual Problem Solving; Troubleshooting - Panasonic DP-8035 Operating Instructions Manual [Page 184] ' ManualsLib

Press the following keys: MENU, #, 9000, *, 655 code comes back replace the fuser unit

Press the following keys: MENU, #,9000,*,655. If Service Code 3 comes back replace the fusing unit (Hot part).

Does the machine say replace drum or toner. Two different units. If toner did refill or install a new toner. There is a chip on most drums and toner to tell the machine they are new. if you refill the toner the chip is still going to tell the machine it is used.

Check the draw one tray. Ensure paper is properly installed and check behind the draw as well

Print Head issue, was it replaced recently ensure it was connected properly, Print head houses the LASER that puts the image on the drum!

Well if there is a Electronic chip on the cartridge then refilling will do nothing as the chip tells the copier its empty unless the chip change refill will not help. If not down load the operators manual and follow the instructions to let the printer know it has a new cartridge. https://www.manua.ls/panasonic/kx-fl421/manual

https://panasonic.net/cns/pcc/support/printer/download/p7100download.html Try this.