20 Most Recent
Questions & Answers
Samsung SWA-4000 Wireless connection problem - Not connecting with main unit
I have had the same problem with the wireless unit and thought the same, it didn't work. The way to fix this is simple. You need to do the 0, 1, 3, 5 on the remote and turn on the home theatre system on the main switch on the front panel (as I was doing this on the remote, and it was failing). The blue light should then stay illuminated. If not just switch the main on/off button again, and it shoud work.
My samsung dvd player keeps flashing RCHK
If it's the home theatre system i think it is that error refers to the rear speakers in which the wireless connection is either unstable or not working at all. make sure to give more info when asking for help.
SWA-4000 doesn't adquire signal of HT-TX500 Home Theather
I was having poor audio from the back speakers and didn't even know it; intermittently I'd hear them jump in volume, so myself being a little adventurous, decided to push the ID set button on the back, totally losing my ilnk... after digging and playing, I figured it out:
1.) Turn off the Head (main) Unit
2.) Power on the wireless receiver, being sure it is away from routers, other BT devices, etc.
3.) Push the "ID Set" button on the back of the wireless device and hold it until the lights on its front panel flash.
4.) Point the system's remote control at the Head Unit and punch in 0135. Its light should turn from red to blue.
5.) Perform step 3 again.
6.) Power on the head unit.
Should link up.
Might be some redundancy there, but it works :)
Also I found that after a few cycles It seemed to work better (perhaps cycled to a better channel?)
Samsung HT-TX500 flashing power button
press and hold the stop button for 5 seconds.then check out.
click the link directly
Download the complete
user guide (2990 Ko)
this is the direct link for the user manual.in that you will have to check the troubleshooting procedure to clear this error of continues flashing power button .
This will help. Thanks please keep updated.please do rate the solution positively .thank you for using fixya.
Picture freezes while dvd player playing
The problem is in the laser pickup assembly, the stepper motor that moves the laser is sticking on the worm gear or excessive ware on the gear linkage is preventing it from moving.
Not finding what you are looking for?