Questions & Answers
TLX-04243B Dead set Red blink lite on right front corner
Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name"
to your device, in the "Search box at the top right of the display window of the Homepage
" to get gathered related posts.
1/17/2017 1:45:15 AM •
96 views • 0 helpful votes
Dvd wont eject
Look for a tiny hole in the front of the tray. Use a paper clip to press in on it. Should pop out easily.
11/4/2013 12:34:39 AM •
60 views • 0 helpful votes
When i turn on my
There is a capacitor on the power supply board that needs to be changed, if memory serves me it is a small 220uf capacitor, the recommended replacement is 470uf capacitor with a higher voltage rating.
3/17/2011 10:56:10 PM •
329 views • 1 helpful votes
Dvd door won't open
try turning it off or on. if that does not work it might be broken and needs to be replaced or fixed.
3/6/2011 4:26:54 AM •
42 views • 0 helpful votes
Hi, I have a Lite
Sorry I did not understand your question. You said, " only get sound from my TV when I play vidio H/D or Disc.
Picture is OK."
You get only sound or video? WHich one is it? Also please let me know the input you are using.
1/6/2010 12:50:22 PM •
48 views • 0 helpful votes
Hi The disc tray has remained closed with a dvd
There is an easier way to remove the cd from the drive than to visit a professional. There is always a hole in the front of the drive, may be on the try front or just below it. If you insert a paper pit into this hole and press a little when resistance is felt, the tray will slide open as the pin releases the lock. And your CD is sitting there. Happy Holidays.
12/22/2009 4:40:34 PM •
41 views • 0 helpful votes
He dont recognize the disk
Put a disc in with the label facing up and note the orientation (ie rotation) then when the disc ejects, see if it's in the same orientation (rotation). If so, the motor is not spinning the disc and it would need to be serviced.
-=/ MLF /=-
10/20/2009 2:10:09 AM •
104 views • 0 helpful votes
-DVD Door will not open :(
FIrst switch Off the power supply.There is a hole just beneath the DVD tray. take a thin wire or unfold a office paper clip.Push the wire gently and the DVD will come out. There can be a mechanical failure, due to which it happened. switch On power supply, take our DVD try two -three times, if it works normally then i think ou problem is solved
12/21/2008 6:35:42 PM •
768 views • 1 helpful votes
Trying to copy my videos
This is more then likely due to the "burning" software you are using. I personally recommend Ashampoo Burning Studio you can download a full version Right Here
After you have that installed just click on > Burn Movies > Create a Video DVD > Just "Drag and Drop" the Video Files you want to Burn then when you are done adding your Video Files Click > Next > Choose and Appropriate Theme > Click Next Again > Insert a Blank DVD R > Click Write !
Just sit back and relax Ashampoo will do the rest.
I wish you the best and a Happy Holiday Season!
I hope this Helps you. Take Care =)
12/8/2008 4:33:39 PM •
194 views • 1 helpful votes
Not finding what you are looking for?