Toshiba E-Studio 3511 Color Copier - Answered Questions & Fixed issues

http://www.craigslist.org

You will not be able to, because the primary drivers for the Toshiba E-Studio 3511 Color Copier, are too old for the Mac OS X 10.6 Snow Leopard printer.

As you already may be experiencing, the range of use for your Toshiba E-Studio 3511 may work with various generic drivers and will not improve due to the Toshiba printer's incompatibility with Mac OS X 10.4 - 10.6.

You will in fact, always have a very limited to basic use of this Toshiba Color copier in Snow Leopard, because the driver support stopped at Mac OS X 10.3 Panther and there are not even any drivers for Mac OS X 10.4 Tiger for this Toshiba printer.


Printer drivers for
Toshiba E-Studio Color Copier:
* Windows98/Me/2000/XP/2003 Server (only 32Bit), * * Windows NT4.0,
* Macintosh 9.X, X ver10.1/10.2/10.3
* Unix (HP-UX 10.20/11.X, Sun Solaris 2.6,2.7,7.8,8,IBM AIX, Linux)

Link to Technical Specs page:
Toshiba E-Studio 3511 Color Copier Technical Specifications

If you want review compatible printers for Mac OS X 10.6 Snow Leopard, here is the Apple link for this list:
Mac OS X v10.6: Printer and scanner software

Hope this helps!

Regards,

-Mactechtrainer
Sr. Mac Support Specialist

buenas noches quiero sabe como scanear en la multifuncuional toshiba 2330c y hacia que carpeta direcciona los documentos gracias

Check is Transfer cleaning Blade set properly

Step 1:- Switch off the machine Step 2:- Press 0 & 5 simultaneously Step 3:- Switch on machine. Step 4:- The display shows test mode. Step 5:- enter code 200 Step 6:- the machine starts automatic adjustement of auto toner sensor , and when the display shows adjust mode then press enter on the display. Step 7:- Now switch off & on and check the problem should be resolved. If problem continues then maybe, changing your developer may solve the issue.

U might need to check your laser unit...

C970 Process related service call High-voltage transformer abnormality: Leakage of the main charger is detected. [C970] High-voltage transformer abnormality (1) Is the main charger installed securely? (2) Check if the spring of high-voltage supply contact point is deformed. (3) Check if the charger wire is broken or the main charger grid is deformed. (4) Check if any foreign matter is on the charger wire or main charger grid.

change adf circit

I have seen several of these older models get stuck in "warming up please wait" mode due to bad hard drive. I have also seen same message caused by the electrical with insufficient amps.

The hard drive is a regular SATA 3.5 hard drive, not 2.5 ( laptop size). Also you need to make sure that no OS files were residing on the hard drive, the copier will not function without the missing files system.

try rest the copier by switch on the copier while pressing '0&8" enter 690 press start button enter 2 press enter key on touch screen, wait till you see 'Reboot the machine: It is communication err.

What is DA

[C970] High-voltage transformer abnormality

(1) Is the main charger installed securely?

(2) Check if the spring of high-voltage supply contact point is deformed.

(3) Check if the charger wire is broken or the main charger grid is deformed. (4) Check if any foreign matter is on the charger wire or main charger grid.

open the back door and yo will see harddisk is connected with system board

replace your toner sensor or tdk sensor

Hi:If you hold down the clr and 8 keys together a alpha numeric code will appear in the upper right corner of the display. I would need this to diagnose further.Andrew

Hello dear: i have a copier machine Toshiba e studio 3511 , and i thing the cdd is fell, how i would do to make work , please can you healh me with themy name is Edgar

mach your ip same in copier and computer

Dear Friends need help to resite l detect value auto adjustment developer konica 7020 Thanks.Kind RegardsMir Afzal

hi i thinku have to clean ADF pickup rollers with washig sope adn just dry with tissues it will solve yors problem if not just replace ADF pickup rollers