20 Most Recent Canon MF6530 Black and White Copier Questions & Answers

I do not have that model but when I have the binding on it does doble side, turn binding off and it is single side.

Canon MF6530... | Answered on Dec 05, 2014

Verify the toner cartridge.Open the glass platen cover and make a copy,not used an original,if the cpy is a full black papier thr toner density is OK,Clean the polygon unit glass.Enter in program and perform a test page.

Canon MF6530... | Answered on Apr 07, 2013

it can be that sesor flaper in fixing unit has an slow response or the sensor is faulty. Also it can be that this is delay jam due to worn out paper feeding roller, or faulty pressure in fixing assy.

Recommendation is to call service!

Canon MF6530... | Answered on Sep 17, 2011

I must admit that I don't know on what plastic part do You mean, but I can send You the part's catalog, inside you will find all parts # and descripton.
Leave the e-mail.

Canon MF6530... | Answered on Aug 26, 2011

I think that is not problem with your printer,
that is cause paper was moist. and sticky.
solution make the paper became warm (put on the warm place or don't use air conditioner in this room)

Canon MF6530... | Answered on May 13, 2011

Welcome to Fixya

Try this troubleshooting procedure:

With the machine on, unplug machine from surge protector or outlet. While the machine is off push the Copy, Scan, Start button in that order 3 times. Plug the machine back up. The machine should initialize and be ready to copy.

Please let me know if you have furhter questions.

Thank you for using Fixya!

If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

Canon MF6530... | Answered on May 04, 2011

it is located where you put original copy. and you can clean with wet cloth.

Canon MF6530... | Answered on Apr 19, 2011

you must have to download the firmware. which can do canon engineer.
copier missing it's operting system.

Canon MF6530... | Answered on Apr 07, 2011

Hello Hawk.
My name is Jeff and I work for a company named Advanced Office Systems which has been in business for over 30 years.We are based out of Knoxville Tennessee and unfortunately can't come to help.But I feel confident my service manager may be able to help you find a service provider in your area.He's a good man named Dan Llewellyn (pronounced "loo ellen").His number is 865.966.0770 ext 217. A busy man ,but a good man. I hope I have helped you so if you don't mind please acknowledge my help thru FIXYA. Thanx and I wish you the best.

Canon MF6530... | Answered on Jan 15, 2011

I presume that the problem is in MFP crg. recognition.
When you remove toner crg. on right side in the MFP you will see black "gear" with one metal pin, which goes out when you close the door. Apply small amount of WD40 or similar and open close door for few times. If it does'nt helps you need to dismantle the copier and clean the whole section...

Hope that helps!

By the way didi you try with another crg.?

Canon MF6530... | Answered on Dec 28, 2010

press *2 then 8 then *again.machine will be in service mode go to clear,then choose all then press ok machine will be in default mode,pleaze wait msg will apear,turn off and on again,i hope u will be happy

Canon MF6530... | Answered on Nov 18, 2010

if you have problem, wich is that you have blank copies and prints, the problem is in metal pin caled laser shuter.
Call service.

Canon MF6530... | Answered on Jun 28, 2010

This model have an laser shutter issue. Call service

Canon MF6530... | Answered on Jun 14, 2010


Please can you be a bit more precise about your problem.We will try our best to assist you.

Thanks for contacting fixya .com

Canon MF6530... | Answered on May 01, 2010

Yes , that is what the feeder is used for so you should not have a problem doing so.

Canon MF6530... | Answered on Feb 02, 2010

Not finding what you are looking for?
Canon MF6530 Black and White Copier Logo

30 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2283 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers


Level 3 Expert

13434 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Canon Office Equipment & Supplies

  • Canon Office Equipment & Supplies

Most Popular Question

printer 39 s feeding mechanism or

  • Office Equipment & Supplies