20 Most Recent
Canon imageRUNNER 2018 Copier - Page 9 Questions & Answers
I have a new Canon printer and the scanner cover won't go down. Does the printer need to be turned on?
or most Canon printers, including the Canon Pixma TR 8620, the scanner cover does not need to be closed for the printer to function properly. However, to use the scanner or copy functions, the scanner cover must be closed.
It is possible that the scanner cover is not locked in place properly, or that there is an obstruction preventing the cover from closing. You can try the following steps to fix the issue:
- Make sure the scanner cover is properly aligned and locked in place.
- Make sure there is no debris or foreign objects inside the scanner bed or on the scanner cover.
- Make sure the printer is turned on and that the scanner is properly connected to your computer or device.
- Check the printer's manual or the support page on Canon's website to see if there is any troubleshooting or instructions specific to your printer model.
If the problem persists, it may be a mechanical issue with the scanner cover or the printer itself, and it may require service from a qualified technician.
Canon k10405 orange stays on plus can't switch off with on off button
If the orange light on your Canon K10405 printer is staying on and you cannot switch it off using the on/off button, there may be a few different causes.
- The printer may be in an error state and the light is indicating a problem with the printer. Check the printer's manual or the Canon website for troubleshooting steps specific to your printer.
- The power button may be faulty and not functioning properly. In this case, you may need to contact Canon technical support for assistance or take the printer to a professional repair technician
- It could be a problem with the power supply, in this case, the printer is not receiving the correct voltage, the power supply will need to be checked and replaced if necessary.
- If none of the above steps work, the problem may be with the main board, and the machine may need to be serviced by a professional technician.
It is not recommended to pull the plug as it can cause problems with the printer's firmware and might cause more damage, instead please try the steps above before requesting service.
My canon pixma printer, scanner cover is stuck?
If the scanner cover on your Canon Pixma printer is stuck, there are a few things you can try to fix it.
- Check for any debris or foreign objects that may be preventing the cover from opening. If you find any, carefully remove them.
- Try gently pushing or pulling the cover to see if it will move. Do not use excessive force as this can cause damage to the printer.
- Check the user manual for any troubleshooting steps or specific instructions for opening the scanner cover.
- If none of the above steps work, you may need to contact Canon customer support for further assistance or take the printer to a professional repair technician.
Please make sure to turn off the printer and unplug it before attempting any troubleshooting steps.
My new canon pixma printer TR8620 has a stuck scanner cover
I apologize for the inconvenience. Please try the following steps to open the scanner cover.
1. Unplug the printer from the power source.
2. Gently press the scanner cover at both sides and lift it upwards until it is fully opened.
3. Plug the printer back into the power source.
4. If the cover is still stuck, please contact the Canon technical support for further assistance.
Where to buy on/off switch for canon pc 400 personal copier
You can purchase an on/off switch for a Canon PC 400 personal copier from several different places. Here are a few options:
- Canon's official website: You can visit canon's official website and look for the parts store to see if they have the on/off switch available for purchase.
- Third-Party Retailers: Look for retailers that sell Canon printer parts and accessories such as Amazon, BestBuy, Newegg, and B&H Photo Video.
- Local electronics store: You can check local electronics store that sells printer parts and accessories.
- Online marketplaces: You can look for the on/off switch on online marketplaces such as eBay, Craigslist, and Facebook marketplace.
- Printer repair centers: Some printer repair centers may have the part you need, so you can check with them as well.
It's important to make sure that you're purchasing the correct part for your specific model and to buy from a reputable source.
Canon ir3300 pc to print in xerox print processing but not pr
If you are experiencing issues with your Canon IR3300 printer when trying to print in Xerox print processing mode, but it's working fine in regular print mode, there could be a few possible causes. Here are a few things you can check:
- Check the printer driver: Make sure that the correct printer driver is installed and that it is compatible with the Xerox print processing software. If the driver is not compatible, the printer may not function properly in Xerox print processing mode.
- Check the network connection: Make sure that the printer is properly connected to the network and that it can communicate with the Xerox print processing software.
- Check the print settings: Make sure that the print settings are correctly configured for Xerox print processing mode. This includes the resolution, color mode, paper size, etc.
- Check the Xerox software: Make sure that the Xerox software is compatible with your computer's operating system and that it is properly installed and configured.
- Check the firmware: check if your printer's firmware is up to date.
- Check the paper size and tray: Make sure that the paper size and tray are correctly configured for Xerox print processing mode.
Paper jammed with no paper canon ir2525
The "paper jam in fuser" error message on a Canon IR2525 copier/printer can occur even when there is no paper physically present in the fuser. This may be caused by a sensor malfunction or a software issue. Here are a few steps you can try to troubleshoot the problem:
- Check the fuser sensor: Make sure that the fuser sensor is properly connected and that it is not damaged or malfunctioning.
- Check the software: Make sure that the software is up-to-date and that there are no glitches or errors.
- Check the fuser gears: Make sure that the fuser gears are not jammed or damaged.
- Check the fuser motor: Make sure that the fuser motor is working properly.
- Check the paper tray: Make sure that the paper tray is properly loaded and that there is no paper jam or obstruction in the paper tray.
- Consult the manual: Consult the manual for specific troubleshoot and service information for your Canon IR2525 model.
Canon IR 2520 Copier showing Paper jam when powering
If your Canon IR 2520 copier is showing a "paper jam" error message when powering on, but there is no paper in the fuser, it could be caused by a few different things:
- A sensor problem: The copier may have a malfunctioning sensor that incorrectly detects a paper jam in the fuser. This sensor might need to be cleaned or replaced.
- Wiring issue: There may be a problem with the wiring that connects the sensor to the main circuit board. A broken wire or loose connection could be causing the sensor to malfunction.
- Software issue: The copier's software may have a bug causing it to display the "paper jam" error message even when there is no paper in the fuser.
- Mechanical problem: The fuser assembly may have a mechanical issue, such as a jammed gear or roller preventing the copier from correctly sensing that there is no paper in the fuser.
It is best to have a professional technician diagnose the issue. They will be able to identify the specific cause of the problem and make the necessary repairs.
It's also important to check the owner's manual for troubleshooting options or error codes that might be displayed on the copier.
If the copier is still under warranty, it is recommended to contact the manufacturer for service.
How to solve error E355-0005 ON CANON 2026N ?
Error E355-0005 on a Canon imageRUNNER ADVANCE 2026N is related to the printer's hard disk drive (HDD) and can be caused by several issues.
- Perform a hard reset: Turn off the printer and unplug it from the power source. Wait for a few minutes before plugging it back in and turning it on.
- Run a HDD check: Go to the service mode and run a HDD check from the device status menu. The printer will scan and check for any errors on the HDD, and if it finds any, it will try to repair them.
- Format the HDD: If a HDD check does not resolve the issue, you can try formatting the HDD. This will erase all data on the HDD, so make sure to backup any important data before proceeding.
- Replace the HDD: If the above steps do not resolve the issue, the HDD may be faulty and will need to be replaced. This should be done by a professional technician.
- Check the firmware: Ensure that you have the latest firmware version installed, outdated firmware can cause issues with the printer's performance.
How do you install a timing strip inside of a Canon 5220 Printer?
Installing a timing strip in a Canon 5220 printer can be a bit of a tricky process, and it's important to follow the instructions carefully to ensure that the strip is installed correctly. Here are the general steps for installing a timing strip in a Canon 5220 printer:
- Turn off the printer and unplug it from the power source.
- Remove the toner cartridge and any other cartridges or components that are in the way of the timing strip.
- Locate the timing strip. It is usually a thin strip of plastic or paper that runs along the top of the printer, just behind the toner cartridge.
- Carefully remove any old timing strip that may already be in place. This can usually be done by gently pulling on the strip until it comes out of the printer.
- Take the new timing strip and align it with the grooves in the printer where the old strip was located. Gently push the strip into place, making sure that it is properly aligned and seated in the grooves.
- Reinstall the toner cartridge and any other components that you removed earlier.
- Plug the printer back in and turn it on.
- Perform a test print to ensure that the timing strip is installed correctly and that the printer is working properly.
It's important to note that the steps above are just a general guide, and the specific instructions for installing a timing strip in a Canon 5220 printer may vary depending on the manufacturer or model of your printer. Always refer to the printer's manual or consult with Canon support team before starting the process.
My canon 1730i keeps jamming and gives error code E000110. I've changed the laser unit but still same problem please any help
Error code E000110 in a Canon image RUNNER ADVANCE 1730i multifunction printer typically indicates a problem with the paper feed system. This error can be caused by a number of different issues, including a jammed or misaligned paper tray, a problem with the paper feed roller, or a problem with the paper feed sensor.
Here are a few steps you can take to try and resolve the issue:
- Make sure that the paper tray is loaded correctly and that the paper is loaded according to the manufacturer's instructions.
- Clean the paper feed rollers with a lint-free cloth and check for any debris or foreign objects that may be causing the jam.
- Check the paper feed sensor for any damage or debris, and clean it as necessary.
- If the issue persists, try to reset the machine. If the problem is caused by a misconfigured settings you can try to restore factory settings to see if the problem resolves.
- If the problem persists and you have recently replaced the laser unit, check to make sure that the unit is properly installed and that all of the connections are secure.
- Check the printer manual or contact Canon support, as they may have more specific instructions or troubleshooting steps that can help identify the cause of the issue.
It's also possible that the problem is not related to the laser unit but instead, it can be caused by a malfunction in other parts of the machine. For example, it could be caused by a malfunctioning paper feed motor, a sensor malfunction, or a malfunctioning control board.
How to Set up Canon Pixma MX492 on Windows?
Installation and setting up your own printer is not as intimidating as it sounds. Before beginning you must know the name of your router. The following are the steps for Canon Pixma MX492 setup on Windows. Start the set up process on your printer and download the set up file on your computer. Select the wireless LAN setup and click ok. Download and run the file on your computer. Go to settings and select the drivers and printers option. Select the name of your printer and click ok.
https://connectmyprinter.com/how-to-setup-canon-pixma-mx492/
Canon IR 2425 poor printing quality
Parece que el problema podr?a estar relacionado con el t?ner. Compruebe si el cartucho de t?ner est? lleno. Si no es as?, reempl?celo con un cartucho de t?ner nuevo. Adem?s, es posible que desee ajustar la configuraci?n de densidad de t?ner en el controlador de impresora a una configuraci?n m?s oscura. Para obtener m?s informaci?n, consulte el manual del usuario o p?ngase en contacto con el fabricante.
Ir 2204L error code E261-0000 how to solve it
El c?digo de error E261-0000 en la impresora Canon imageRUNNER 2204L se produce cuando se detecta un error en la se?al cero-cruz de la fuente de alimentaci?n durante la inicializaci?n. La soluci?n a este problema es reemplazar el PCB de la fuente de alimentaci?n y el PCB del controlador DC. Tambi?n es importante verificar el termistor principal TH1 para asegurarse de que tenga un buen contacto y que no est? abierto. Si todav?a no se resuelve el problema, podr?a ser necesario reemplazar el interruptor t?rmico.
Not finding what you are looking for?