20 Most Recent Alcatel C820A Cellular Phone Questions & Answers

Contact network service provider for issues with connections.

try youtube.search on dismantle.u'll need the screw drivers

Do you have the PC Suite for your phone downloaded on your laptop. If not, click here:
http://bit.ly/aa5d8z

Fixya does not assist in the breaking of a phone's security nor provide assistance to do so.

To set up MMS and internet on your Viaero Alcatel phone, you'll need to enter specific APN (Access Point Name) settings. Typically, you can find these settings in the 'Network & Internet' section of your phone's settings menu. If you're unsure of the exact APN details for Viaero, I recommend checking their website or contacting Viaero customer support for the most accurate information. They should provide you with the necessary data like the APN name, username, and password to configure your phone correctl

Here is a couple of answers; https://www.fixya.com/support/t23762460-alcatel_mobile_getting_message_as_pls

It is Muted https://www.google.com/search?q=alcatel+t56+handset+mute+problem ..

The Unlock code is the one that you or the previous owner put on it. There is no way to know what code you put on it. The only way to fix this is to do a Factory Reset and scrub it clean of all data and reload the operating system clean with no lock code.

How to Reset an Alcatel Phone: 11 Steps (with Pictures)

wikiHow https://www.wikihow.com > ... > Cell Phones 11 steps 1. Turn off your Alcatel phone. Tap and hold the Power button until the screen shuts down. When the screen completely fades to black, then it is already off ... 2. Press and hold the pound (#) key and Power button at the same time for about 3 to 4 seconds. You will be prompted that all the data will be deleted. If ... 3. Select "Yes" to delete all data. Use the phone cursor on your keypad and scroll down to the "Yes" option. Press the OK button to select it. The OK button is ...

How to Perform Hard Reset Tracfone Alcatel A206G Flip ...

TracfoneUserManual.Net https://tracfoneusermanual.net > hard-reset-tracfone-al... Hard Reset Alcatel A206G · Make sure to turn off the phone first. · Press "Power button" and "*" button for a couple of second. · A warning will show up asking if ... .

Alcatel GO FLIP V - Answer Options

Verizon https://www.verizon.com > ... > How to Use 5 steps 1. From the main screen, select Menu. Utilize the 5-way navigation pad to highlight and press the OK button to select. 2. Select Settings. 3. Select Call Settings.

Alcatel GO FLIP User Guide

T-Mobile https://www.sprint.com > alcatel > documents PDF Call key. Launches call log from idle screen. Back/clear key. Returns you to the previous screen, or close a dialog box, options menu. End/power key. 127 pages

Alcatel GO FLIP V - Answer Options

Verizon https://www.verizon.com > ... > How to Use 5 steps 1. From the main screen, select Menu. Utilize the 5-way navigation pad to highlight and press the OK button to select. 2. Select Settings. 3. Select Call Settings.

Alcatel GO FLIP User Guide

T-Mobile https://www.sprint.com > alcatel > documents PDF Call key. Launches call log from idle screen. Back/clear key. Returns you to the previous screen, or close a dialog box, options menu. End/power key. 127 pages

The network key is a code that is used to unlock your phone's SIM card for use with a specific network carrier. If your Alcatel one touch is asking for a network key when you insert your SIM card, it means that your phone is locked to a particular carrier, and you need to get the unlock code from the carrier or a third-party provider. To get the network key, you will need to contact the carrier that the phone is locked to and request the code. If you have completed your contract with the carrier, they may provide you with the code for free or for a fee. You will need to provide them with your phone's IMEI number, which is a unique identifier for your phone. If the carrier refuses to provide the network key or you don't want to pay the fee, you can also try third-party providers. These providers can unlock your phone for a fee, and they may provide you with the network key. However, be cautious when choosing a third-party provider and make sure they are reputable and reliable. Once you have the network key, you can enter it into your phone when it prompts you to unlock the SIM card. To do this, go to the phone's settings, then to the network settings, and look for the option to enter the network key. Enter the code, and your phone should be unlocked and ready for use with your SIM card.

I admire this information for the well-researched content and excellent wording. I acquired so involved in this material that I couldn't stop reading. I'm impressed together with your work and skill. Thanks so much. wedding flip flops for guests

Hi there again. Epson lx350.i replaced main board only to find out later the one pin not working is actually in a fired position until when I switch machine off is when the pin goes back.please assist If I understand correctly, you are saying that after replacing the main board in your Epson LX350 printer, you have found that one of the pins is not functioning properly and it only resets when you switch the machine off. In this case, it's possible that there is an issue with the connection between the pin and the main board or the pin itself may be damaged. Here are some steps you can take to troubleshoot the issue:

1. Check the connection between the pin and the main board. Make sure that the pin is securely connected to the main board and that there are no loose connections.
2. Inspect the pin itself for any physical damage or signs of wear and tear. If the pin is damaged, it may need to be replaced.
3. Check if the pin is properly aligned with the other pins on the main board. If it is misaligned, this could cause the issue you are experiencing.
4. Check if there are any firmware or software updates available for your printer. Sometimes, updating the firmware or software can fix hardware issues.

If none of these steps resolve the issue, you may need to contact Epson support for further assistance or consider consulting a professional technician to diagnose and fix the problem. My seca 813 only showing STEP OFF AND STOP massage cannot reset ?? If your Seca 813 is only showing the "STEP OFF" and "STOP" messages and is not responding to any commands, it is possible that there is a problem with the scale's sensors or the internal circuitry. Here are some steps you can take to troubleshoot the issue:

1. Make sure that the scale is on a flat and stable surface. If the scale is on an uneven surface or is wobbling, it may not be able to take accurate readings and could display error messages.
2. Check the scale's batteries. If the batteries are low, this could cause the scale to malfunction. Replace the batteries with fresh ones and try turning the scale on again.
3. Reset the scale. Some scales have a reset button or function that can be used to clear any errors or malfunctions. Refer to the user manual for instructions on how to reset your specific model of scale.
4. Check the scale's sensors. Over time, the sensors on a scale can become dirty or worn, which can affect their accuracy. Clean the sensors with a soft cloth or brush and see if this resolves the issue.
5. If none of the above steps work, you may need to contact Seca support or a professional technician for further assistance. They may be able to diagnose the issue and recommend a repair or replacement if necessary.

Forgot password on alcatel one touch p310 - Alcatel Cell Phones If you have forgotten the password for your Alcatel One Touch P310 phone, you can try the following steps to reset the password:

1. Turn off your phone.
2. Press and hold the Volume Up button and the Power button at the same time until the recovery mode screen appears.
3. Use the Volume buttons to scroll down to "wipe data/factory reset" and press the Power button to select it.
4. Scroll down to "Yes" and press the Power button to confirm.
5. Wait for the reset process to complete. This may take a few minutes.
6. Once the reset is complete, use the Volume buttons to select "reboot system now" and press the Power button to restart your phone.
7. Your phone will now be reset to its factory settings, which means that all data and settings, including the password, will be erased.

Note that this process will erase all data on your phone, so make sure to backup any important data before proceeding. If you are unable to reset the password using this method, you may need to contact Alcatel support or a professional technician for further assistance.

Total loss as water will have also damaged the battery and all the electronics inside.