20 Most Recent Uniden TRU9585 Cordless Phone - Page 5 Questions & Answers

I suspect remote is unable to communicate with the base and is reporting the issue as power loss at base.

So does the base function, makes and receives calls?

Reset the base unit and power supply by unplugging the base power supply from the wall, wait at least 1 minute, plug base power supply back into wall outlet.

Reset remote by removing battery wait a minute, reinstall battery.

If after the reset the base can't make/receive calls, its likely failed.

If the base works and the remote still reports base power issue, could be either base or remote.

The manual is at the following link...

http://www.uniden.info/download/index.cfm?s=D3098

• You are urged to arrange for periodic performance checks with a Uniden Marine dealer

This info is from page 34 of the operation manual which is available on the internet in pdf format: •To edit the number, press END/CLEAR. to back up the cursor and delete numbers. Re-enter the correct numbers.

not knowing what phone it is make this hard. It will be in the setup menus but most systems will probably be limited to 6.

Uh.... Delete old messages would be my 1st try.

phone failing

Save hours of searching online or wasting HELP NUMBER +1 833 272 0777money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

You can't

Is the memory filled up? Delete old messages you don't need and try again

If your Uniden product is not performing to your expectations, please try these simple steps. If you are still unable to resolve the problems, please contact Uniden Customer Service for assistance. CHARGING/POWER

Charge light won't come on when Handset is placed in the Base Unit?

There are no lights on the Base Unit?

The telephone only operated after the first time the handset was charged?

The batteries do not work in my new cordless phone?

The charging light colour does not change when the batteries are fully charged?

Should I leave the handset back on the base after the batteries are fully recharged?

The handset beeps?

AUDIO QUALITY

Audio sounds weak and/or scratchy. Interference is evident on my analogue phone?

Interference is evident on my digital phone?

Only continuous static is heard from the Handset and the phone will not turn off?

The handset and base make a humming noise?

NO CALLS

Can't make or receive calls. There is no dial tone?

RINGING

Handset does not ring or receive a page?

The Base Unit does not ring?

CALLER ID

How do I activate caller ID?

How can I access call waiting?

Call waiting is not working?

GENERAL OPERATION

Range is limited?

The answering machine is not answering calls?

Telephone banking is not working?

How do I extend the number of rings?

The clock on the answering machine looses time?

I cannot record an outgoing message?

How do you store phone numbers to memory?

Will my phone work overseas?

What do I do if my phone gets wet?

The earpiece volume is not loud enough?

The ringer volume is not loud enough?

What is the model number?

it means the disk is damaged otherwise you have a software problem and not a hardware problemsee:https://inro.in/hola-vpn/https://inro.in/private-internet-access/https://inro.in/tunnelbear/

Hello, Kenneth - The user manual for the Uniden corded / cordless telephone model D3098 can be found here: https://teltex.com/content/userguides/Uniden-D3098-User-Guide.pdf (PDF document, Adobe Acrobat Reader software needed to download and save to a computer - software is free) Instructions for the Answering System begin on Page 21. If you need more assistance, the Customer Care phone number can be found on Page 1. Best wishes.

try dialing in #43# into handset while dial tone heard

Hello Miriam Taylor, Listening to the message should be sufficient. Mine wasn't a real message... I fat fingered the base trying to INTERCOM to my wife's remote. As I never intended to use my system as an answering machine... I deleted it too... If you look really closely at the 1,2,4 & 5 key on the touch pad of each wireless remote the (play) right arrow seen on the base is adjacent to the 2 key... Press it... Delete will be an OPTION above the SOFT keys associated with the menu words on your display... (off & message gone). Then made sure MY ANSWER FEATURE was "OFF". You will have to read the manual... (RTM, below). Message access can be accomplished three ways... at the Base, at any cordless station... and (off premises) remotely from anywhere in the telephone network. Hope this helps... ELSE RTM. My favorite site for FREE manuals is manualslib (MUST provide actual model numbers) No exact matches found Try these results Uniden DECT 6015 Owner Manual Amazon com Uniden DECT 6 0 cordless phone Office Products Carnac the Magnificent

Check manual from manufacturer. It requires a model number to obtain it. http://www.uniden.info/download/ http://www.uniden.info/download

no but it helps if there is a charge in the battery