20 Most Recent Uniden TRU9585 Cordless Phone - Page 4 Questions & Answers

You probably have voicemail through your provider with a message

The directions to set the date and time on the Uniden EXS9500 are shown in the manual starting on page 21. Press and hold the Clock button (the second button from the left below the answering system buttons) on the base until you hear a beep. Use the Skip/Repeat buttons (the two end buttons of the answering system buttons) to select the current day of the week. The LCD with show 0 through 6 and the voice prompt will list the day of the week. Press Clock when the correct day of the week is announced. Use the Skip/Repeat buttons to select the current hour (1-12). Press Clock to set the hour. Use the Skip/Repeat buttons to select the current minutes and press Clock to save the setting. Use the Skip/Repeat buttons to select AM/PM and press Clock to save the current time and exit the clock setting menu. ManualsLib has the directions starting here: https://www.manualslib.com/manual/334436/Uniden-Exs9500.html?page=21#manual . I hope this helps. Cindy Wells

It is the indicator that you have a voice mail (answering service that comes with your phone provider. Contact them to tell you how to access it. to access iprimus voice mail, dial your own number it will then ask for your PIN, if you have not set this up the default number is your area code ie. 02 Sydney 03 Melbourne etc. and the last 2 numbers of your phone number

open line if have more than one phone plugged into a jack unplug one at a time and check dial tone if no change have phone company check incoming line

https://www.manualslib.com/products/Uniden-Dss-2455-2120056.html https://uniden.com.au/wp-content/uploads/DSS-2455.pdf https://www.manualslib.com/manual/184594/Uniden-Dss-2455.html

Here are a couple of sites that may have what you are looking for. https://www.google.com/search?q=manualslib&rlz=1C1AFAB_enUS452US453&oq=&sourceid=chrome&ie=UTF-8 Free User Manuals and Owners Guides ManualsOnline com

press menu down to answer set up keep pressing the down button until you get vmwi press menu change to yes press menu then end

Answer

How to stop the visual ringer blinking

That might be the Voice Mail Warning Indicator. On the D3098 and similar handsets, it is reset by: 1. press [menu] 2. scroll down to "Global Setup", press [select] 3. scroll down to "VMWI Reset", press [select] 4. scroll down from "No" to "Yes", press [select] 5. handset will chirp, blinking lamp goes out, 6. press [END] Other models, check your manual. The model number is on a small sticker under the battery in the handset -- enter this number at www.manualslib.com to get a free copy of the User's Manual.

No, the Uniden D1780-2W handset is not compatible with the EZAI2997 base. The EZAI2997 base is compatible with up to 6 EZX290 handsets. Amazon lists some used models for sale: https://www.amazon.com/Uniden-Accessory-Handset-Charger-EZX290/dp/B0026LLBG8 . The D1780-2W handset came with the D1780-2 or other models with the D1780 or D1780-BT base. Uniden has the manuals for these systems on their support site. The current link to the EZAI2997 manual is http://www.uniden.info/download/ompdf/EZAI2997om.pdf . The D1780 support page is http://www.uniden.info/download/index.cfm?s=D1780 . The manual for this system is currently http://www.uniden.info/download/ompdf/D1780om.pdf . I hope this helps. Cindy Wells

Is it in 'tone' mode or "pulse" mode

I find no way to disable the CID record feature. If you wish to neither see nor record CID, contact your service provide and unsubscribe to the CID service. A copy of the user manual is available at; http://www.uniden.info/download/ompdf/DECT1580om.pdf To delete all the recorded Caller ID numbers with the handset do the following; When the phone is in standby, press ID (on the 4-way navigation function key), then press MENU/SELECT, then select Delete All. When the phone asks you to confirm, select Yes.

Likely the two ring answer is "toll saver" You'll need to retrieve new messages. Once all new messages have been reviewed, it should return to the programmed number of rings, see "ring time" in the manual. ALL messages may be deleted as follows; delete all messages With the phone in standby, press Delete; press Delete again to confirm. If answering system messages have been retrieved, a continuing flashing indicator could be your voice mail service; Voice Message Notification • If you subscribe to a voice mail service, your phone can notify you when you have a new message. This feature supports Frequency-Shift Keying (FSK) notification. Contact your voice mail provider for information. • When you have new messages, the display shows a message icon. After you listen to your messages, the message icon turns off. If it doesn't, you can reset it. With the phone in standby, open the menu and select Global Setup; select VMWI Reset, then select Yes A copy of the manual is available from Uniden; A copy of your manual can be downloaded free of charge from; http://www.uniden.info/download/ompdf/D1788om.pdf

Likely unit kaput, but battery suspect. Try different battery, not necessarily new but if you have a second known good Uniden handset with same battery, swap batteries.

Likely its a pending VoiceMail not answering machine. See... http://www.fixya.com/support/t3030275-red_message_light_blinking_uniden_phone