20 Most Recent Garmin nuvi® 200 Car GPS Receiver - Page 6 Questions & Answers

Download the gps drivers from Garmin. Do a hard reset on the device. Download Garmin Express and install it to your PC. Connect your device to your PC. Garmin Express will identify it and allow you to install all the maps and software that the device has a subscription to.

Download and install Garmin Express from the Garmin site. Connect your GPS to your PC. The program will identify the GPS and allow you to register it.

Create an account on the Garmin Website or use the Garmin Express software (free download).

not sure if this link will help you out. https://www.google.co.uk/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=Looking+for+users+manual+Nuvi+58

Try a soft reset: To reset the Garmin device, turn off the device by pressing the power button on the top of the device. When the unit is off, press your finger to the bottom right corner of the screen and continue holding while pressing the power button. A prompt will appear on the screen confirming data reset. Click Yes. If that doesn't work, try a factory reset: https://www.youtube.com/watch?v=D_-zumajbaA

Go to your settings and check what options have been selected. You may have to revert to the default settings and then tweak your preferences.

These are quite common plugs used in computers. I suggest you take it into a electronics store and get a plug that will fit into the back of your GPS and the other end needs to have a standard USB connector. then the only thing you'll need is a cell phone charger that plugs into the cigarette lighter plug

Try On the Road Maps

https://support.garmin.com/support/manuals/searchManuals.faces?refresh=true There will be a small label by the power connector with that info. After you have the model you can get the manual at the above link.

Unplug... Install drivers and software 1st!... Then plug in usb

Garmin nuvi 1490T Factory Reset hay i found this for you it may help I had the exact same problem. No response from a Master Reset. I finally tried to put the unit into a stand by mode. Press the top left corner of the display and power the unit on. Keep pressing the top left corner and the "GARMIN" will displayed. Release to power button, then quickly plug the unit into a computer. You should see a green dot in the lower left hand corner of the screen. Release the top left corner and you should see the green bar start to load. When the green bar goes across the screen the unit should show it plugged into the computer and your computer should recognize it. I know it was tempting faith, but I used the WebUpdater (this originally caused my problem), again and this time it worked and everything seems to be fine.You can search the Garmin forums on how to put the unit into the Standby mode. It took me a couple of tries to get the sequence right, but I was pleasantly surprised.