Top 20
Hunter 30547 Air Purifier Questions & Answers
My hunter 30890 air purifier wont turn on after filter change
Most times the cover has an interlock. Look for something prijecting from cover and the a place where this would fit into. Align cover then close. If you dont see one then look under or behind filter. Also check the filter is installed correctly (direction of airflow). Remove power (unplug or circut breaker) then power back on might reset as well.
11/2/2018 5:38:34 PM •
Hunter Air...
•
1,810 views • 0 helpful votes
It will not turn on
Crystal, first turn the Master ON/OFF Switch to OFF. Unplug the unit from the wall outlet and wait 12-15 minutes before plugging the unit back in. After you plug it in, turn the Master ON/OFF Switch to ON and set the controls as you wish. Hopefully, during that 12 - 15 minute timeout, the unit reset itself and should now work normally.
If that doesn't solve the problem, you can call Hunter Technical Support. In the US dial 888-830-1326.
In Canada dial 866-268-1936
4/15/2011 3:02:58 PM •
Hunter Air...
•
452 views • 0 helpful votes
Not finding what you are looking for?