Top 20 Panasonic CQ-VX100U Car DVD Player - Page 7 Questions & Answers

I have to say it, so let's get it out of the way; there are many professionals in your area who are capable of doing this for you. Whether it be Car Stuff or a Land Rover dealership, you can expect to have everything put just the way you want. But I have solved this problem myself once...

I have run into this problem on my Nissan Maxima. My solution was a bit extreme and involved quite a bit of butchery. You may decide to do something else. What I did was cut the connector off(to the original stereo) of the cart and spliced the power wires together. Then I turned on the unit and put in my favorite cd, adjusted balance to the front-left and touched wires together to figure out which was the proper speaker wire. Then did the same for front-right, rear-left, and rear-right. After figuring out the proper way to wire it in, I went back and installed ****-end connectors(wire nuts will work, but take up more space) and re-wrapped with electrical tape, making sure there were no wires or metal to ground out. If you do decide to cut the connector from the vehicle, leave enough wire on the connector so it can be reinstalled at a later date, 2-4 inches of room to work with(just in case you need to reinstall original stereo unit).

Think long and hard about if you decide to make this work. It is dangerous to modify a vehicles electrical system due to a RISK OF FIRE . Let me say it again--there are professional automotive audio people in your area who can do this. Check with Best-Buy.

Hi,

You can download and print the instruction manual and wiring diagram in PDF format by clicking this link.

Adobe PDF Reader is required to view this manual. Download Adobe Reader

Hope this helps. Thanks for using FixYa.

red is ignition or switched positive power, yellow is constant power, black is ground.

scotch tape

panAll other vehicles subject to this model and we are opening car radioasonic cq-vw120w [email protected]

the memory wire is yellow

Hi, i will like you to understand that just like American Spec. cars comes are installed with English language, so also are German Spec. cars come with installed German language and Chinese Spec. car too with the Chinese language.
So in this case, as long as the Mercedes car is of Japanese Spec., everything about it will be in Japanese and you cannot change the language except you get the English user manual of the DVD player or change the DVD player..

yellow is 12v main
red is accessory
black is ground
blue/white is amp on
blue is antenna remote

hope this helps thumbs up pls

Hi
Error F03 is caused by a mechanical failure, such as a tape stuck in the machine, a cracked or broken gear in the tape load or threading mechanism. It may also occur due to some part bent in the tape carriage (this is what you stick the tape into, and it in turn pulls it into the machine). Make sure that there is not anything stuck in this area. A broken gear, or if the gears are just one tooth off will likely cause this error condition. Also check the loading/unloading mechanism if it fine. To check these thing you'll need to disassemble the Panasonic player. If the gears are fine then it’s an issue with the power supply circuit of your player.
Hope this helps... If it does please do not forget to accept the solution or post back for assistance.
Daniel

seek the station you want and then choose which preset you want the station to be at.. press and hold the preset button for 2-4 seconds and the station should be locked in that preset. repeat for each preset.

Click on the link below to contact and order a replacement lens cover for your Panosonic NV-GS150GNS Camcorder

http://www.panasonic.com.au/support/customer_care/

http://www.panasonic.com.au/support/where_to_buy/list.cfm

http://www.panasonic.com.au/support/downloads/file_type_results.cfm?fileTypeID=2&productCategoryID=38&productID=3047

you will probly have to reset it.

Here are some free Panasonic car audio manuals, hope it helps - vhttp://caraudio.manualsonline.com/manuals/mfg/panasonic/panasonic_car_stereo_system_product_list.html

if you have a wiring guide for your deck, take a look at it and see what your rear speaker + and -'s are, connect them accordingly to the wiring guide in the link and your speakers should work, if not, the wires running to the speakers are probably damaged. if thats the case, go to a dollar store and pick up some speaker wire, and run it under your panels, or carpet, what ever is easier for the particular make.

Your code appears to be incorrect as the radio is not accepting it.

Post the radio make+model plus all the numbers+letters on any labels, barcodes or stamped in the metal casing to check your code

How I change the language Japanese to english

en.wikipedia.org/wiki/DVD_region_code
www.dvdexploder.com/
www.ilovedvd.co.nz/regioncodes.asp
www.dvd.reviewer.co.uk/info/multiregion/
http://www.google.co.nz/search?aq=f&sourceid=chrome&ie=UTF-8&q=dvd+region+codes
encuentre por favor los Web site, para ayudarle con códigos de la región de DVD y cómo todo trabaja.

For a panasonic Strada CN-HDS960D car navigation system, you can't have a B-CAS access card with Perth WA maps to work on that.

These depends on region as you know.

Good luck.

That all depends on what it's going in to. Smartest thing would be to go to a place that sells and/or installs car systems, give them your stereo model, and car it's going in to info, and they can usually supply you with an adapter plug that will allow you to plug one in to the other and minimize wiring nightmares.

http://service.us.panasonic.com/OPERMANPDF/SBW500.PDF try this... allthough generic it should work for you