NetGear WNDR3300 - RangeMax Dual Band Wireless-N Router - Answered Questions & Fixed issues
The Update Assistant keeps opening a dialog box
1.Press Windows logo key + R, type winver and hit Enter key.( Check the version details of Windows 10 installed on your computer).
2.Shutdown your device ,restart it back and then initiate the upgrade to see if goes correctly this time.
If any third party Antivirus or Online security software is installed, then try to disable it for a moment then try to initiate the upgrade to see if it goes correctly.
In case problem still persist, then try to upgrade it in Clean Boot state.
1. Press Windows Key, type msconfig in the search box, and hit Enter.
2. On the Services tab of the System Configuration dialog box, tap or click to select the Hide all Microsoft services check box, and then tap or click Disable all.
3. On the Startup tab of the System Configuration dialog box, tap or click Open Task Manager.
4. On the Startup tab in Task Manager, for each startup item, select the item and then click Disable.
5. Close Task Manager.
6. On the Startup tab of the System Configuration dialog box, tap or click OK, and then restart the computer.
Jaramilloj50
I would also like to assist you with your problem. I see you are having a problem with your NetGear WNDR3300 router. That said, we need to know what the problem is in order to help you solve it.
What does the LAN do on the modem
There are two halves to a router. The internet (WAN) side a local network (LAN) side.
The term WAN means Wide Area Network and generally refers to the internet.
The term LAN means Local Area Network. That would be for the computers that are in your office or home.
The LAN connects your computer to your printers or to other computers.
I hope that answers your question!
We recently upgraded our iphones. Since then we are having truoble with our internet connection randomly disconnecting some of the devices being used.
If the WIFI security encryption for the WIFI password isn't in what's called "WPA2-ONLY", sometimes there will be random disconnects. By default, I think the encryption is "WPA+WPA2 mix mode" which can be the source of disconnects.
You will find this in your router's settings which you can access by navigating to what's called the default gateway IP in any web browser. Commonly, it is 192.168.0.1, but can be 192.168.1.1, or even 192.168.2.1. It will ask you for a username and password if you've done it correctly. It might say on the router what the username and password is, or you can find the default login credentials online for all common routers.
Login, then find some kind of "security" tab, maybe under wireless, or WLAN, or something like that. It will give you an encryption option for the wireless network and password, and choose the WPA2-ONLY option. Save or apply the settings, and your router will reset and hopefully you won't have any more disconnect issues.
Opening a port on a Cellpipe 7130 router
pretty much the same as any other routerlogin => advanced setup => port range forwarding
field one (name)
field two (port to open)
field three (port to open)
field four (probably TCP/IP, but its 50/50 guess)
field five (local ip to route traffic using that port to)
and last drop down and select "enable"
Mac OSX 10.6.8 HP laser printer connected to
Can you ping from both computers? (Open terminal and try "ping <the printer's IP address>" obviously replace the <> with the IP of your printer) I'm not too familiar with Macs but can you comapre the driver version? If there is a universal HP driver, use that.
Cannot log into router
To RESET the Netgear, power up the Netgear then press andhold the RESET button at the back of the router until all the LEDs flash.Connect a LAN cable from the Netgear to the LAN port on yourcomputer, open a browser and enter the Netgear configuration URL -http://192.168.0.1The default login = adminThe default PW = passwordYou can now change the default admin password and configurethe wireless settings.Go to the wireless configuration and set up the SSID and WPA or WPA2encryption.Now apply these settings to the wireless card in your laptop/computer.To secure your wireless network from unauthorized access, please click on thislink and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security
My Rangemax wireless wndr3000 is
Same situation here. Wired connection from modem works fine. I can also log in to the router via routerlogin.net. However, the router does not detect an internet connection.
I lost power and when
Things will depend on how the power went out or why. If it was a thunder storm you may have had a power surge as it went out.
You should try using a cable plugged into the port. The log on and check to see if the wifi is off. If the unit reset it self to factory the wifi is disabled. Hopefully that is all it is. If the uni is older the wifi section may have failed. Netgear is good stuff even the home grade units so they don;t die often unlike other brands with Link in the name ;-]
Unfortunately if you can't just turn the wifi back o it is time to replace it.
How do i turn off
MAC address filtering is configured in the wireless settings.
Connect a LAN cable from the Netgear to the LAN port on yourcomputer, open a browser and enter the Netgear configuration URL -
http://192.168.0.1
The default login = admin
The default PW = password
You can now change the default admin password and configurethe wireless settings.
Go to the wireless configuration and set up the SSID and WPA or WPA2encryption.
Apply these settings to the wireless card in your laptop/computer.
To secure your wireless network from unauthorized access, please click on thislink and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security
Not finding what you are looking for?