Cnet CWR-905 Wireless-N Router - Answered Questions & Fixed issues

This webpage has some information on the router, sorry I could not be more help but I am not familiar with this router.Webpage

Some later model wireless routers have the Password(ie.Encryption key) and the SSID already configured in the wireless router andthis information is printed on a label on the bottom of the router.These settings can be used to configure the wireless card and wireless adaptersin your computer/laptop. If these settings do not suit you, then it can be changed to suit yourrequirements. The encryption key secures your data and wireless connection from unauthorizedaccess.To configure the wireless settings in the router, connect a LAN cablefrom your computer to the wireless router, then open a Browser on your computerand enter the router's configuration IP address, then enter the admin login andpassword and then go to the wireless settings and configure the SSID andEncryption key.The router's encryption key can be a Passphrase or the WEP or WPA or WPA2key.If you use the Passphrase method select either WEP or WPA or WPA2 togenerate the encryption key. You can enter the WEP or WPA or WPA2 key with 8 to63 ASCII characters or 64 Hex digits.Most people use Passphrase which is easier to remember eg. I was born inJanuary 1988.The strongest and latest security is WPA2, the weakest and oldest is WEP. Toconnect to your wireless router from the computer/laptop, configure thewireless card in your computer/laptop with the router's wireless settings ieSSID, plus the WPA or WPA2 encryption key. Then computer/laptops cancommunicate with your wireless router.http://www.fixya.com/support/r10267861-network_security_key

go to ip address of the router then make it secured.

Contact you provider to see if you can get the router configuration set to "Default so that you can gain connectivity again.
Changes in the router ESSId cause the router to change all parameters therefore locking the connection.
You can reinstall the router software and start from scratch to reset the router and enter a new ESSID password but I would get with the ISP and go through there setup procedure to ensure proper settings for their server. You probably missed something when replacing the password.

First press RESET button it is in back side of router press it for 10 seconds so all settings are defaults.

Then connect your router to computer with ethernet cable.
Then access it with following link.
http://192.168.1.1
or
http://192.168.0.1
type user name as "admin" and password as "admin" or blank or "password"

Let me know if you need more assistanse.
Thanks.

Probably your internet providers modem has blown also.Without the router do you have internet connection?

Depending on the internet provider, most IP addresses are set for a certain amount of time before the lease on them is up, in most cases the modem automatically renews the lease and the modem keeps the same IP address. In some cases, when the lease expires, the modem receives a new IP address from your ISP's dhcp server. In rare cases, the modem does not receive an IP address due to either a failure in the hardware (of the modem, hence faulty modem, time to replace) or the firmware on the modem needs to be upgraded. To upgrade the firm ware on the modem, a call to your ISP's tech support should solve that.

sounds like you hard disk is on its way out.

A server that is dedicated to handling users that are not on a LAN but need remote access . The remote access server allows users to access files and print on the LAN from a remote location.

Me dieron un router inal?mbrico -g serie CWR-854v pero no tengo el cd de instalaci?n q me podr?a ayudar mi correo electronico es torigallo_123hotmail.com si alguien tiene este mismo router si podria ayudarme con el cd de intalacion q en las pajinas no consigo para descargarlo

it's really not worth the trouble of replacing the fan, but if you really want to fix it then you can just expose the motherboard and use a regular fan on it's highest settings (make sure nothing can mess with the router, little kids and pets might play with it).

The router password can be change if you try inputting 192.168.0.1 in the command line of the Internet Explorer. You may need another set of numbers if the router is other than a Cisco product. It could be 192.186.1.1 or 192.168.1.0 also. You did not specify what Router you were using?

do you mean like port forwarding on your thomson..kindly verify.
regards

What type of cables are you using for the connections? are they straight or cross? It could stop working if you change a straight with a cross.

Also if it has an 'uplink' port check to ensure you connect the internet link there

The drivers can be found here "http://www.vimicro.com/english/product/pc003.htm" select the product and download the necessary software.

Hope this helps

thank you very mach my frend

intex night vision camera is not install in our laptop may be software problem
camera model no; IT-305WC

Essayez de rechercher sur YouTube votre mod?le de machine Janome ou contactez le support Janome.com.

fixya is not a classified ad forum --look up online in your area

How to recover a verizon.net email password withou...

Verizon https://community.verizon.com > td-p Nov 23, 2019 - How to recover a verizon.net email password without any recovery information?

Forgot password - Verizon

Verizon https://secure.verizon.com > forgot-password > start Recover your Verizon Account password, simply and easily with your Verizon User ID or Verizon mobile number. You can also pay on your wireless or in home ...

VEC Support - Reset a user's password - Verizon

Verizon https://www.verizon.com > onlinehelp > access > admin Oct 3, 2022 - Reset password · 1. Log in to Verizon Enterprise Center · 2. Select your name in the top right of the screen and select Service Groups · 3. Under ...

How to reset primary Verizon email password

Verizon https://community.verizon.com > td-p Sep 22, 2013 - Click on "Reset your password." To change your password within MS Outlook, there should be an option to change it in account settings. The ... ..