3Com NBX 3101 - Answered Questions & Fixed issues


Hi,
At Two scenarios it will be happening.
1. When your phones act as a intercom.
2. When your server settings are enabled with auto-answer option.

Check with server admin.

-Karthik.

3Com NBX 3101 | Answered on Oct 20, 2012 | 166 views


This must be done on the phone system as the administrator. For 6.0 software go to System-wide settings, set date and time, and you can set it there. For 5.0 and older, go to Tab to it, System configuration, system settings, date and time. Once the time has been set on the phone system the date is updated instantly on the phones (even before your browser finished loading the next page).

3Com NBX 3101 | Answered on Jul 27, 2010 | 1,632 views


The phone may be apart of a hunt group. Inside of the Net Set Utility, check to see if it is a member of that hunt group.

3Com NBX 3101 | Answered on Mar 03, 2009 | 168 views


Reboot the phone system (through the browser) and this should take care of it. There are limited voicemail ports and sometimes they get put on hold and can't be released. I have seen it a lot. some versions of software can clear this but a reboot will take care of it.

3Com NBX... | Answered on Nov 11, 2013 | 58 views


This is a Internet Explorer issue. If you use it in "compatibility view" it will show all users when you click on show all users. Otherwise use google chrome or firefox.

3Com NBX... | Answered on Nov 11, 2013 | 80 views


A very simple solution to r epairing all by yourself is getting help from handbooks, they're very detailed and complete in every way so for me it was my b est source to repair
one of the top sites for this is https://big-manuals.com/

3Com Computers &... | Answered on Dec 07, 2018 | 370 views


Time for a new mouse!

I’m happy to help further over the phone at https://www.6ya.com/expert/joshua_ac64e182ed26f66d

3Com Computers &... | Answered on Feb 08, 2018 | 73 views


I don't know anything about these units, nor do I have time to source any docs for you, but maybe you can try connecting a PC directly to the port your patch panel is connecting the the switch from, you can at least see if that port is working.
My next and only other suggestion is to invest in a "LAN cable tester". In my area, you can find cheap ones for U$20.
The tester will allow you to check connectivity between any two ports, and allows you to test both patch links and individual CAT5/6 cables.
Good luck!

3Com Computers &... | Answered on Nov 22, 2017 | 161 views


notify the police dept / person handling the case and let them know about the face book information

3Com Computers &... | Answered on Nov 08, 2017 | 82 views


Use a brute force password solver or at best do a reset

3Com Computers &... | Answered on Dec 07, 2016 | 789 views


Fixya offers advice to DIY people. With something like you are talking about, it would not be easy because of parts, and manufacturing processes. Also it might cost more to have it repaired than to get a new one.

3Com Computers &... | Answered on May 02, 2015 | 210 views


Hi,
I hope this link is waht you need.
http://www8.hp.com/us/en/support-search.html?tab=1#!=&qryterm=3com 40 0483 001 ethernet&search_searchtype=s-002

If not please the exact model of your device.
Good luck

3Com Computers &... | Answered on Mar 07, 2015 | 313 views


1 Remove power from the Gateway. 2 Disconnect all your computers and the cable/DSL modem from the Gateway router. 3 Using a straight through Ethernet cable, connect the Ethernet Cable/DSL port on the rear of the Gateway to any one of the LAN ports. 4 Re-apply power to the Gateway. The Alert LED will flash as the Gateway starts up, and after approximately 30 seconds will start to flash more slowly (typically 2 seconds on, 2 seconds off). Once the Alert LED has started to flash slowly, remove power from the Gateway. 5 Remove the cable connecting the Cable/DSL port to the LAN port, and reconnect one of your computers to one of the Gateway LAN ports. 6 Re-apply power to the Gateway, and when the start-up sequence has completed, browse to: http://192.168.1.1 and run the configuration wizard. You may need to restart your computer before you attempt this. 7 When the configuration wizard has completed, you may reconnect your network as it was before

Here on page 85 of the manual
3Com 3CRWE53172 User Manual Forgotten Password And Reset To Factory...

3Com Computers &... | Answered on Mar 03, 2015 | 403 views


For 3Com that would mean a 3100 series or 3500 series phones. The 3100 series phones are for NBX and VCX phone systems and the 3500 series phones are for VCX only. Both are also SIP compliant.

3Com Computers &... | Answered on Jan 08, 2015 | 73 views


Here is the standard pinout for a console port on a router to seriel port for computers
21473952-p02ntbe4zwfh4zdoomaey2km-2-0.png

3Com Computers &... | Answered on Feb 01, 2020 | 4,065 views


If I remember correctly, there is a tiny hole at the back or on the side. Press a paper clip into it. The switch should do a full reset and then reboot. If its just locked up, I would switch off at the power for 15 mins and try let it do an auto restart itself. Do this before you go doing a full button press reset as you may lose any or all updates the switch has had loaded into it.

3Com Computers &... | Answered on Sep 02, 2014 | 397 views


Are you able to remove the card from your PC?
and read the model on it?
Are you able to find your motherboard/computer model?
use the motherboard/computer model to find what model of card is on it.
Once you have the nic model search for a driver.

3Com Computers &... | Answered on Jun 20, 2014 | 69 views


From Digium Mailing List:

3Com 3100 series phones do not support SIP with non-3Com systems. They have a basic boot loader which must download code from a 3Com NBX or a 3Com VCX system. If you don't have either of these, then you won't get runtime code on the phone, thereby making it impossible to use the thing with Asterisk.

Asterisk Users 3Com Phones

3Com Computers &... | Answered on Apr 08, 2014 | 206 views


Press F2 on start up. Change BIOS settings

3Com Computers &... | Answered on Apr 04, 2014 | 31 views


There could be a lot of reasons, one is port blocking, the other is firewall, there caould also be NAT port issues, what modem and internet provider do you have could be the problem.

3Com Computers &... | Answered on Feb 03, 2014 | 379 views

Not finding what you are looking for?
3Com NBX 3101 Logo

6 questions posted

Ask a Question

Usually answered in minutes!

Top 3Com Computers & Internet Experts

Mike

Level 3 Expert

4372 Answers

Vincent G
Vincent G

Level 3 Expert

2363 Answers

Sheldon Dedek

Level 3 Expert

912 Answers

Are you a 3Com Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...