Top 20
SonicWALL TotalSecure 3G (TZ190) (01-SSC-6088) Firewall Questions & Answers
UPNP over sonicwall
For "security" reasons, you should not all UPNP traffic from "outside" of your network to enter your "internal" network. Block it.
4/14/2014 11:52:28 PM •
SonicWALL...
•
1,558 views • 0 helpful votes
Remove pc performer from my computer
Hi you can remove the PC Perfomer using the software Ccleaner.
CCleaner 4 09 4471
select tools and uninstall the PC Performer, if it doesn't uninstall then select delete entry. Also Ccleaner makes your computer faster by removing temporary files/cleaning registry. Hope this helps.
4/8/2014 6:28:47 PM •
SonicWALL...
•
98 views • 0 helpful votes
Hack the sonic wall
Hacking is a broad term and there are many attack vectors which you can use. If you do not truly understand that then you will not be cracking a firewall. You need a method of attack, recon it and search the vulnerabilities.
2/17/2014 3:55:16 PM •
SonicWALL...
•
261 views • 0 helpful votes
Strange noise
Sounds (pun intended) like one of the cooling-fans has worn-out bearings, and is "screeching", just before it totally freezes-up, and dies, and causes your SonicWall to overheat.
1/28/2014 8:31:02 PM •
SonicWALL...
•
151 views • 0 helpful votes
Get bsnl internet settings sony xperia
The high-level answer is to get the login parameters and internal IP for the Sonicwall, get the Internet parameters for your new ISP, and then log into the Sonicwall device, go to Networking-> Interfaces, and configure the WAN adapter with those settings.
1/25/2014 8:51:36 AM •
SonicWALL...
•
148 views • 0 helpful votes
Wife is patient in local
The inability of a client running Windows Vista to connect with a
SonicPoint or any SonicWALL firewall (UTM) appliance running SonicOS
Standard firmware is caused by a lack of a correct association on the
SonicWALL between the computer running Windows Vista and its assigned IP
address. Follow these steps to work around the issue by editing the
System Registry:
WARNING: Exercise extreme caution when modifying the System Registry.
Incorrect modifications could lead to an inability to boot your system.
It may become necessary to completely reinstall your operating system.
- Click the Start button.
- Select All Programs > Accessories.
- Right click Command Prompt and click Run as administrator.
- Type regedit.exe and press enter.
- Go to the following location: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
- Right click this entry and select New Dword.
- Rename the new entry ArpRetryCount (leave it set to 0 by default).
- Restart the computer.
- Reassociate with the SonicWALL. You should notice a successful connection.
Please print this out if possible, you may want to take your computer to a local repair shop to make this change if your not comfortable.
3/23/2011 1:27:57 AM •
SonicWALL...
•
225 views • 1 helpful votes
I can't get the laptops
Is "sonicwall fire wall" a separate computer-networking appliance, or is it software that runs on each laptop?
Uninstall it, and enable the Windows Firewall. This latter firewall is just as good as any "commercial" software.
3/17/2011 10:58:02 PM •
SonicWALL...
•
207 views • 0 helpful votes
My account has been hacked into and the password
Contact your ISP, explain what the issue is, advise them fully follow up by letter and change all accounts and password open up new account. If any money is involved, then contact all baks and credit card companies.
3/16/2010 1:06:33 PM •
SonicWALL...
•
106 views • 0 helpful votes
I was given this computer
sonicwall, if this is a software program on your computer, press start -> control panel -> add or remove programs or programs and features, find it from the list and uninstall.
If your blocked from doing so, can you tell me the brand and model of the computer and also if you have XP or Vista on the machine.
9/11/2009 9:06:51 PM •
SonicWALL...
•
41 views • 0 helpful votes
Router will not see modem
It seems your router is going bad , first thing to do here is to reset the router by pressing the reset button for 30 seconds and after the reset unplug the power of the router for 10 seconds and then if you still have the setup CD for the router just run it to the computer conencted to the router and reconfigure the router back....
10/24/2008 8:56:54 PM •
SonicWALL...
•
190 views • 0 helpful votes
Not finding what you are looking for?