20 Most Recent Ultra Max (ULT31825) ATX Mid-Tower Case - Page 3 Questions & Answers

Try connecting to a different USB port and restarting computer.back USB ports are better than front ones as they connect directly to motherboard.do not panic but if this still locks out then you must connect to another computer or laptop as first stage.usually these happen when someone switches off the main machine whilst it is still writing to the external drive which can corrupt a file and cause unread ability.one you have access run a quickscan to fix files and folders on the external drive.get back to me if none of the above fixes this problem and I will point you towards some some ware to correct further likely problems.

Wipe The Hard Drive--Raw--Then Let Windows Partition And Then Format In Setup--They Are In Hidden Partition.

there is a small speaker with slide bar push slide to right

Are you talking about the Iomega JAZ Ultra Portable? This is a portable drive with a removable disc if that is correct. There is no "reset switch" the disc can be formatted and/or the data can be recovered with the right software. If you need further help, I’m available over the phone at https://www.6ya.com/expert/michael_e0539de310ea5ad7

Click start control panel view devices and printers you should see your webcam from there if you are have trouble with your webcam Click start control panel administrative tools computer management device manager scroll down image devices you could see a yellow question mark? right click to reinstall drivers or update driver xp Click start right click on computer select properties device manager scroll to image devices expand right click to update driver in W7 http://download.cnet.com/2000-20_4.html on the home page you should see a search tab just type in what you are looking for IE: webcam name webcam driver you might have to try a few times to get it right software if you dont have the driver you will need to download one here rather doing a driver hunt which can take hours http://download.cnet.com/slimdrivers-free/3000-18513_4-75279940.html Windows XP/Vista/7/8 It might take some time being a freeware driver solution note: it will find all of your outdated drivers this is a free driver solutions This will automatically search for and find the correct driver you will have to update every driver individually once you update you might be asked whether you want to restart or make a system restore point click no to both of these then continue updating each driver free then restart once all of the drivers have been updated Some webcams and programs require additional software, although that should be installed with the webcam if things are right. But is does not harm to check if your Java, Flash and Quicktime software are installed and up to date. But certainly check your DirectX software, since all video applications, including webcams, use DirectX for video processing. Try downloading the latest DirectX version and install it (Windows XP: DirectX 9.0c - Windows Vista: DirectX 10). http://windows.microsoft.com/en-US/windows7/Which-version-of-DirectX-is-on-your-computer Hope this helps.

click start control panel view devices and printers you should see your webcam from there if you are have trouble with your webcam click start control panel administrive tools ,computer management ,device manager scroll down image devices you could see a yellow question mark? right click to reinstall drivers or update driver if you dont have the driver you will need to download one here are a few you could try http://www.filebuzz.com/findsoftware/Universal_Software_For_All_Webcams/1.html http://www.filebuzz.com/findsoftware/Webcam_Driver_For_All_Webcams/1.html http://www.filebuzz.com/fileinfo/49356/SplitCamVideo_Virtual_Driver.html http://download.cnet.com/splitcam/3000-2348_4-10500269.html http://download.cnet.com/%7Bvalue=http://www.download.com/creative-webcam-pro-ex/3000-2120_4-10203073.htmlWindows 98/Me/2000/XPhope this helps

Hi

check if this is your motherboard.
http://www.msi.com/index.php?func=proddesc&maincat_no=1&cat2_no=170&prod_no=1294

if it is the right one then you see the drivers on the top right side of the page.

please post the MS-XXXX number from the motherboard if that wasn't the correct one, for example msnumber:
MS-7529

Hi,

Welcome to Fixya. I would like to know what is the extension of the recordings? do you have an error message when you try to open the file? Please provide the information needed to be able to check if this is caused by a codec issue.

Thanks

Hate to tell you this but your GPU overheated and you will need a new motherboard. If I can hazard a guess I would say it is an HP or at least has an nVidia or ATI chip. At any rate the only way to fix it is professional reflow of graphics chip or replace MB. Sorry!

P.S. I know how to do this so if you are handy and think you can do it I will give instructions.

Is this with or without a load?
There is always some ripple on the DC output of a switching mode power supply, and the less the load, the greater the ripple.
Measure the power supply under full load, that's the real test!

CAn you please confirm if you are using this device (click link)
What is the Windows operating system and the interface you are using?
What type of hard disk is installed in it?

Need a password.....if its not yours then could be tricky.

Are you talking about docs on it that you cannot alter or getting access to the Stick??

If its docs that is altered in the office program it was typed in.

in this case what you do just open your CPU case and remove your sound card and re fix it hope fully your problem will solve

give me vote if you will get solution

right click anywhere on your screen and left click properties. This will take you to your screen display. You will see a lever with a number range. You can change to a higher resolution. If it's in internet explorer, go to view at the top, then text size and choose large or larger, etc. In a program such as word, you'll see some numbers at the top ext to B U and I. You can choose a larger size there.

Your dial up modem needs to be ab external modem.
You can not use an internal modem from another machine unless you create a network and share your connection.
If you have an external modem then connect the modem to the available port on your laptop and let plug and play take over. If you do not have a port on your laptop and you modem has a serial port you will need a usb to serial adapter which you can get at Radio Shack.

please restart ur computer then try to go to safe mode and check there if still not working open the tower and plug out all the devices connected inside open and replug all the devices like hard drive and ram slots clean the ram slots please xcheck the fans if they are working properly

Who ever needs the genx 600 dpi usb scanner driver file this is the link u ppl can download from here

Smartscanplus driver

http://www.xtrememea.com/ftp/sc_smartscanplus_driver_v1.zip

Hi snailsdad,

I'll give you two different ways to find out what driver they installed.

1). You can go to your control panel, and look for System icon. Click on that Icon and when it comes up click on the hardware tab, then click on device manager. This will bring up a new window. What you want to do here is go down to sound, video and game controllers and click on the + . This opens up the devices and drivers that are installed on your computer. Usually the first one is your sound controller, Right click on that line and choose properties. This opens a new window that will explain to you all the computer knows about the device.
Now, you will click on the driver tab, and look at the name of the driver. If this is not what you want, you can click on the roll back driver button, and if it's still on the computer (if the computer firm didn't delete it) it will reinstall the original driver.


2) you can download a free program that will run and tell you what driver you have. It won't tell you if it's correct of not. Just what it is. What you can do, is reply back to this solution, with the make and model of your computer and if you know if the sound card is on the motherboard, or it is a separate card installed on the motherboard. Then I can get you the correct driver that should be installed on the computer.

Good Luck,

And don't forget to leave a rating, And don't forget to reply if you want further help.

Thanks


Mark