20 Most Recent Singer 2250 Tradition - Page 9 Questions & Answers

0helpful
1answer

Can't get plate off over feed dogs on 503 a singer

To remove the plate over the feed dogs on a Singer 503, please follow these steps:
  1. Turn off the machine and unplug it.
  2. Remove the presser foot and the needle from the machine.
  3. Locate the plate over the feed dogs on the bed of the machine.
  4. Look for the screw holding the plate in place. It's usually located on the left-hand side of the plate.
  5. Use a screwdriver to loosen the screw and remove it from the plate.
  6. The plate should now be loose and can be lifted off of the machine.
If you are still having trouble, consult your sewing machine's manual or consider taking it to a professional for assistance.
2/26/2023 10:41:40 AM • Singer Sewing... • Answered on Feb 26, 2023
0helpful
1answer

I have a Singer sewing machine 9618 and the light has finally burned out after a gazillion years. How do you get the bulb out?

To replace the light bulb on your Singer sewing machine model 9618, please follow these steps:
  1. Turn off the sewing machine and unplug it from the power source.
  2. Locate the light bulb cover on the left side of the sewing machine, just above the needle.
  3. Use a small flat-head screwdriver to gently pry the cover off.
  4. Remove the old bulb by gently pulling it out of the socket.
  5. Insert the new bulb into the socket, making sure it is securely in place.
  6. Replace the cover by aligning it with the slot and gently pressing it back into place.
Note: Make sure to use a light bulb that is compatible with your sewing machine's voltage and wattage specifications. You can find this information in your sewing machine's manual or on the light bulb itself.
2/26/2023 10:41:16 AM • Singer Sewing... • Answered on Feb 26, 2023
0helpful
1answer

Singer 603E Sewing Machine. Why is it making a rat's nest when I try to sew.

Your sewing machine tension is incorrect. Tension is a delicate tug of war between the upper thread and the bobbin tension to place the knot loop in the centre of the two pieces of cloth. Sewing machine tension is how tight the threads are pulled as you sew. The tighter your thread (or the higher your tension), the tighter your stitches. With proper tension, your sewing machine needle moves up and down, the bobbin thread is pulled up, and you get nice, neat, even stitches.

Understanding Sewing Machine Tension - DIY Danielle®

https://diydanielle.com > sewing-machine-tension
2/26/2023 4:12:23 AM • Singer Sewing... • Answered on Feb 26, 2023
0helpful
2answers

Threading a bobbin on a singer

https://www.libble.eu/singer-m100a-tiny-tailor/online-manual-734431/?page=0008
2/25/2023 9:32:00 AM • Singer Sewing... • Answered on Feb 25, 2023
0helpful
1answer

Singer sewing machine 6236 manual

Need manual for Singer 6236

6f9a67b4-860a-4a24-940c-b493220124bd.jpeg


9e3a40eb-1b8f-47da-ac0d-e423cb031dad-jebn2mucdzbhfygr5z5l0oig-d-2.jpeg
2/23/2023 11:56:22 PM • Singer Sewing... • Answered on Feb 23, 2023
0helpful
1answer

Please how or where can I get the installation software for singer futura SES1000

Always get software from the manufactures web site or their authorised agent.
2/20/2023 8:21:32 AM • Singer Sewing... • Answered on Feb 20, 2023
0helpful
4answers

I have a Singer Stylist 513 & I cannot get the feed dogs raised.

The model 513 Singer has two gears which operate the feeding mechanism. If one of these gears is broken, the machine will run except the feed dogs will not move. This is a very common problem with this model.
2/17/2023 5:21:29 AM • Singer Sewing... • Answered on Feb 17, 2023
0helpful
1answer

How to replace just the lever on a singer 2277

The old timey fix is to put the needle down, swing the fabric 180 and stitch a few stitches in the other direction. It works, but slightly annoying
2/13/2023 1:37:15 PM • Singer Sewing... • Answered on Feb 13, 2023
0helpful
1answer

What is the maining when the singer futura turns on and all the red light are blinking continues?

The meaning of red lights flashing on a device called "Futura" is not clear as I am not aware of any specific device with that name. Can you provide more context or information about this device? It might also be helpful to consult the manufacturer's manual or customer support to determine the meaning of the flashing red lights.
2/13/2023 12:03:36 PM • Singer Sewing... • Answered on Feb 13, 2023
0helpful
1answer

I have a Singer Talent 3321 and i am having a difficult time finding the correct pressure foot for quilting on this machine.

Are you doing free-motion quilting or piecing? The Talent 3321 uses the Singer Low-shank presser feet. If you are doing free-motion quilting, use the darning/embroidery foot. For piecing, use the 1/4" foot. See https://www.singeronline.com/3321talent.html . If you are quilting in straight lines, you might consider the walking foot. The original part numbers are shown in the manual under the Optional accessories on page 9 (page 16 of the PDF). The manual is available on the product page: https://www.singer.com/Talent-3321-Sewing-Machine . The direct link to the manual is currently https://manuals.singer.com/Manuals/RetrievePDF/971 . Other sources with the presser feet in stock are https://www.sewingparts.co.uk/machines/clip-on2/singer-3321.html and https://www.sewingpartsonline.com/singer-3321-sewing-machine-parts.aspx?index=39 . I hope this helps. Cindy Wells
2/13/2023 12:43:08 AM • Singer Sewing... • Answered on Feb 13, 2023
0helpful
2answers

Singer Quilter Confidence - needle moves when winding bobbin

If the needle on your Singer Quilter Confidence machine moves when you're winding the bobbin, it's likely due to a few possible reasons. Here are some steps you can take to resolve this issue:
  1. Check the threading: Make sure the thread is properly threaded through the machine, as an incorrect threading can cause the needle to move during bobbin winding.
  2. Tighten the needle clamp screw: If the needle clamp screw is loose, it can cause the needle to vibrate during bobbin winding. To tighten the screw, use a screwdriver to turn the screw clockwise.
  3. Check the bobbin winder tension: If the bobbin winder tension is too loose, it can cause the needle to move. To adjust the tension, refer to the manual for your Singer Quilter Confidence machine.
  4. Check for any obstructions: Make sure there are no obstructions near the needle, such as thread tails, fabric, or lint, as these can cause the needle to move during bobbin winding.
If you've tried all of these steps and the needle continues to move during bobbin winding, it may be a mechanical issue that requires a professional to fix. I would recommend contacting Singer for further assistance.
2/12/2023 1:03:12 PM • Singer Sewing... • Answered on Feb 12, 2023
0helpful
1answer

My singer soulmate 5500 keeps coming on E6 and I have a threaded correctly and the Bobben is OK so I don't know what the problem is can you help me

he error E6 on a Singer Soulmate 5500 sewing machine is typically associated with a threading error. If you have confirmed that the thread is correctly threaded and the bobbin is in good condition, here are a few other things you can try:
  1. Check the needle: Make sure the needle is the correct size and type for the fabric you are sewing, and that it is securely inserted into the machine.
  2. Check the tension: The tension of the thread may be incorrect. Adjust the tension dial until the thread is feeding through smoothly.
  3. Clean the machine: Dirt and debris can build up in the machine over time, causing issues with the threading and operation. Clean the machine thoroughly and make sure the threading path is clear.
  4. Check for thread jams: Remove any thread that may be jammed in the machine and clear the path for the thread.
2/11/2023 4:52:59 AM • Singer Sewing... • Answered on Feb 11, 2023
0helpful
1answer

Have an issue with the pressure bar on my singer curvy. the bar itself is loose and is turning the foot left to right. The pressure lever works fine and the bar doesn't grab when lifted ?

If the pressure bar on your Singer Curvy sewing machine is loose and turning from left to right, it could indicate a problem with the pressure bar mechanism. If the pressure lever is working fine, but the bar is not grabbing when lifted, it could be due to a problem with the tension on the bar or with the mechanism that holds the bar in place. In this situation, it is recommended to take your sewing machine to a certified Singer repair technician
2/7/2023 11:10:47 PM • Singer Sewing... • Answered on Feb 07, 2023
0helpful
2answers

My 8500Q Singer sewing machine - the thread is bunching up and getting tangled in the feed dogs from the bobbin I believe. I cleaned out all of the lint, replaced needle, and checked upper thread

  1. Check the threading: Ensure that the upper thread is threaded correctly through the tension and take-up lever, and that the bobbin is inserted correctly in the bobbin case.
  2. Adjust the tension: Check the tension on the upper and lower threads. If the tension is too loose or too tight, adjust it according to the instructions in your sewing machine manual.
  3. Clean the feed dogs: Make sure that the feed dogs are clean and free of debris. If they are dirty, clean them with a soft brush.
  4. Check the needle: Ensure that the needle is inserted correctly and is the correct size and type for the thread and fabric you're using.
  5. Inspect the bobbin case: Make sure that the bobbin case is clean and free of debris. If it's dirty, clean it with a soft brush.
2/6/2023 1:52:54 PM • Singer Sewing... • Answered on Feb 06, 2023
0helpful
1answer

Singer 345 instructions manual

If you are looking for the singer 345 instruction manual, you can find it here. The singer 345 is a medium-sized indoor/outdoor loudspeaker that is perfect for large events and public spaces. It features an advanced audio processing and amplification system that makes it capable of producing clear and powerful sound. The singer 345 instruction manual includes detailed instructions on how to set up, operate, and adjust the speaker for optimum performance.
1/29/2023 2:21:52 PM • Singer Sewing... • Answered on Jan 29, 2023
0helpful
1answer

How do you adjust the pressure on the foot on a Singer 7033 Signature Machine

You can't adjust the presser foot force on the 7033. The loose loops indicate the top thread tension is too low. Try re-doing the top thread with the needle and presser foot fully up. Next make sure that the area under the bobbin case is clean. If you are still having an issue, consider a walking foot to keep the fabric layers together. Make sure to get one for a slant shank sewing machine. I hope this helps. Cindy Wells
1/21/2023 11:46:12 PM • Singer Sewing... • Answered on Jan 21, 2023
0helpful
1answer

Singer model 7363 after power on all lights continue to flash and a short noise occurs just once and the machine is not operational

by a few different things. One possibility is that there is a problem with the power supply or a component that is preventing the machine from starting properly. Another possibility is that there may be an issue with the control board or one of the sensors on the machine that is causing the lights to flash and the machine to produce a noise. I would recommend checking the power supply and cord to make sure that they are properly connected and functioning. You should also check the user manual for troubleshooting steps or contact the manufacturer for further assistance. If the problem persist, it may be best to take the machine to a professional repair shop or contact the manufacturer for further assistance.
1/21/2023 10:48:30 AM • Singer Sewing... • Answered on Jan 21, 2023
0helpful
1answer

Singer 9960 bobbin winder won't disengage clutch while winding bobbin so needle moves up and down

The issue you are describing with your Singer 9960 bobbin winder could be caused by a few different things. One possibility is that the clutch is not properly engaging or disengaging. Another possibility is that the bobbin winder belt may be loose or damaged, causing the needle to move up and down and making noise while winding the bobbin. It is also possible that there may be a problem with the bobbin winder mechanism itself. I would recommend checking to make sure the clutch is engaging and disengaging properly, and check the bobbin winder belt and mechanism for any signs of damage or wear. If you continue to experience problems, it may be best to consult the manual or contact the manufacturer for further assistance.
1/21/2023 10:46:35 AM • Singer Sewing... • Answered on Jan 21, 2023
0helpful
1answer

Is it hard to replace all the gears on a touch and soul singer model 638

Replacing all the gears on a Touch and Sew Singer Model 638 sewing machine can be a difficult task and should be done by a qualified technician or a sewing machine repair professional. The process of replacing the gears involves taking apart the entire machine, which can be complex and time-consuming. The technician will need to have a working knowledge of the internal mechanics of the machine and access to the proper tools and replacement parts. The process also includes adjusting and aligning the gears after replacement, to ensure proper function of the machine. It's important to note that It could be easier and cheaper to service the machine instead of replacing all the gears, this will depend on the condition of the gears and the technician's assessment. It's recommended that you take your sewing machine to a professional sewing machine repair shop or a authorized Singer service center to have it checked and repaired if necessary.
1/20/2023 6:53:10 PM • Singer Sewing... • Answered on Jan 20, 2023
0helpful
1answer

Singer 99K: thread can't pass the bobbin case

Do not loosen the screw. The most likely issue is that you didn't get the bobbin case in exactly the right position. Remember you have to get the forked end straddling the bracket. Then twist the bobbin case slightly to the left and back as you push it down lightly. Keep doing this until the edge of the sewing hooks engages in the groove under the rim of the bobbin case. It can take practice to get the bobbin case properly aligned. I hope this helps. Cindy Wells (I have a slightly different Singer model. It still takes three tries to replace the bobbin case at times. It's hard to tell exactly how far to twist and push the unit even when I think it's aligned properly.)
1/19/2023 11:30:50 PM • Singer Sewing... • Answered on Jan 19, 2023
Not finding what you are looking for?
Singer 2250 Tradition Logo

128 questions posted

Ask a Question

Usually answered in minutes!

Top Singer Sewing Machines Experts

Cindy Wells

Level 3 Expert

6688 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Singer Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Singer Sewing Machines

  • Singer Sewing Machines

Most Popular Question

needle stuck in bobbing case sewing

  • Sewing Machines
Loading...