Cuisinart SC-65CP Slow Cooker - Answered Questions & Fixed issues
Do you know where I
Believe or not, go to your local Goodwill Store! They have tons of crocks and the lids and the cookers separate frm each other that have been donated becase one of the pieces was broken and they donated the rest of the pieces. Lids and crocks typically range from $1.99 to $5.99 and you benefit your community at the same time.
10/3/2010 4:13:08 AM •
Cuisinart...
•
Answered
on Oct 03, 2010
•
199 views
Cuisinart slow cooker shuts off before timer is done. It is older, doesn't have a weight sensor so is there a way to rest?
If your Cuisinart slow cooker is shutting off before the timer is done, it is possible that the slow cooker is overheating or experiencing an electrical issue. Here are a few things you can try to troubleshoot the issue:
- Check the slow cooker for any visible signs of damage, such as a cracked or broken heating element or loose wiring. If you see any damage, stop using the slow cooker and unplug it until it can be repaired by a qualified technician.
- Make sure the slow cooker is placed on a flat, stable surface and is not being overloaded. Overloading the slow cooker or placing it on an unstable surface can cause it to malfunction.
- Check the power cord and plug for any visible signs of damage, such as fraying or exposed wires. If the cord or plug is damaged, stop using the slow cooker and unplug it until it can be repaired by a qualified technician.
- If the slow cooker is clean and undamaged and is placed on a flat, stable surface, try unplugging it and then plugging it back in to see if the issue is resolved.
If these troubleshooting steps do not resolve the issue, it is possible that the slow cooker is experiencing a malfunction that requires repair by a qualified technician. I recommend contacting Cuisinart or a local appliance repair service for further assistance
I purchased 4 Cuisinart sauspand about 5 weeks
if there is rust appearing after 5 weeks you should stop using it and get a another brand that rust is bad for you and is getting in your food .it,s better to be safe.that is a flaw in the metal plating.
What does the code oh mean on my new pressure cooker
It means the cooking time is done and you are now in keep heated mode and have been there less than an hour, after an hour it will say 1H, two hours 2H and so on. It scared me because the first time I used it I thought it was overheat and it didnt tell me in the manual that I could find.
2/24/2024 5:14:32 AM •
Crock Pots &...
•
Answered
on Feb 24, 2024
•
2,769 views
My brand new crock pot won't heat up
maybe you can try checking the electrical cord, check the appliance controls if it has a thermostat test the heating element and if it still proves faulty carry it back and replace it
2/19/2024 2:14:29 AM •
Crock Pots &...
•
Answered
on Feb 19, 2024
•
532 views
Not finding what you are looking for?