20 Most Recent
Oster HDX23 12-Cup Coffee Maker Questions & Answers
Slow brewing
The coffee maker has three contributory factors for brewing experiences. First, putting enough water in container prior to brewing is expected to dispense in to coffee capture cup. Second, installing the component parts after inserting coffee leaflets should not hinder brew seepage into the cup. Third, allowing enough time for the brew to dispense is a requisite means to coffee impressions. Furth, coffee leaflets require appropiate numbers inserted at the container area lest the machine takes time to sock and dispense. However, refer to the device user guide for appropiate manufacturers instructures to user as expectations during brewing. Also, refer to the user guide to ascertain any conditions that may be signs of damage preventing fast brewing.
Machine comes on at random times, which it is not set to do
Sounds like leaving the carafe empty has caused over heating damage, this in turn probably generated a random fault on the program.Programable micro chips have a default reset pin, a safety factor when built in to machine circuits. The chip now appears to have 'cooked off' causing failure to operate according to the program. Any temperature over 55 degrees C does this to any non-NATO standard chip.
Not finding what you are looking for?