Top 20 Haier ESD400 Stainless Steel 24 in. Built-in Dishwasher Questions & Answers

You have a faulty touch pad that will need to be replaced. Below is a link to a video you will want to download so you can see how to replace the touch pad.

http://www.appliancerepairlesson.com/shop/dishwasher-videos/control-repair-whirlpoolkitchenaidkenmoremaytagjenn-air-amana-dishwashers/

Good Luck

http://www.haier.com/products/more.asp?epcID=6
Follow the ;inks on their global web page....cheers.

Basically, the Haier is a piece of ****. Parts are not available and the phone-in service (if you can call it that) will keep you on hold endlessly. Do yourself a favor and get a better machine.

From previous experience, I would bet that the circuit board/ control panel is failing. The one I had leaked steam near the top of the unit and the condensation will work it's way into the top control panel. Bad design on Haier's part. The worst part about mine was there is no adjustment for the door. I ended up getting a refund on the unit and buying a very nice LG model. Good luck dealing with Haier. They will send A&E factory Service out and they are not very good. I would suggest getting rid of the Haier. (personal opinion)

Did you every get your this problem solved? I am having the exact same problem

Hello,

Thank You for contacting Fixya.com

There are some common reasons for this type of behavior shown by the dishwasher:

Power from the house Is there power getting to the dishwasher? This can be difficult to test, because dishwashers are usually wired directly to an electrical circuit, rather than plugged into the wall. But at least check for a blown fuse or a tripped circuit breaker.

Door switch The door switch is important because, if it's defective, the dishwasher won't work at all. To reach it, you need to remove the control panel cover, or sometimes the interior liner of the door. If it's defective, you need to completely replace it.

Wiring Often the main wiring connection from the house, at the dishwasher, burns and breaks the connection. If that's the problem, the wires must be repaired/replaced as necessary. If that's not the problem, check the wiring to the door switch, the wiring between the door and the lower part of the dishwasher, and the wiring to the timer. Repair any broken, burned, brittle, or defective wiring, using the proper appliance-grade wire and connectors.

Timer or selector switch Although it's uncommon, the timer or the selector switch may be defective. If so, you need to replace the defective part, because neither of these can be repaired.

Best of luck and God Bless.

Please let us know if you have any other queuery.

Here's the service technicians manual: http://service.haieramerica.com/documents/DW-8888-26.pdf

Here's the user's manual: http://service.haieramerica.com/documents/user%20manual%20esd400.pdf

It has a leak into the drain pan. It is flood protection.

Haier Dishwasher Error Codes Explained

Exclusive Repairs https://exclusiverepairs.co.uk > Blog Dec 8, 2021 - Haier dishwasher E6 error code indicates that the flood protection device has been activated and the water supply will need to be turned off, . ..

Contact the seller or Haier direct as it is still under warranty. Just for information, we are Fixya, we aren't Haier. https://www.haierappliances.com/support ..

First thing to try is a reset.. Unplug or turn it off at the breaker for 5 minutes. You can also try this but it's used to clear error codes.... Simultaneously press and hold Cycle Select and Start pads for 5 seconds. Press ANY button to complete the reset process. ... The unit will now be ready to use/function normally at this time.

With 30,000 9.4 out 10 reviews, they must be good! It won't be the element though, it will the thermistor or the thermostat that is failing. Some can be calibrated. It may also be a failed circulation fan on a fan assisted oven. Test the oven first with an oven thermometer. elements can be tested for resistance, but in my experience they work or they don't, they don't half work. https://fixpart.de/de/uber-uns ..

The float switch may be stuck.

user manual https://www.manualslib.com/manual/548406/Haier-Hpn12xhm.html https://www.haierappliances.com/support/manuals

Just wondering if you found the problem as ours has just started throwing the"E30" code

check out this site. they have the fuses and some videos on how to test and replace which will tell you where it is https://www.repairclinic.com/Shop-For-Parts/b198c44/Haier-Fuse-Thermal-Fuse-Breaker-Parts

OK. When you see water on the floor, and you open the door, is there any water rising in the wash chamber and breaching the seal? If you open the door and do not see any water other than the water dripping off the dishes or whatever, I would suspect there's a leak underneath. If you see water standing in there, they you will want to clean the food/debris trap. Refer to your manual, if you have one. If the food trap is cleared and the water is still comin out, I would suspect a leak underneath the unit, possibly a loose water hose or drain hose.

Sounds like the dishwasher control panel has failed.

This is most likely an issue with the control panel.

How to Post A New job on Facebook Timeline Today I will train you a way to submit new activity on Facebook Timeline. And a way to do that, in How to Post New Job on facebook