20 Most Recent Haier ESD400 Stainless Steel 24 in. Built-in Dishwasher Questions & Answers

You have a faulty touch pad that will need to be replaced. Below is a link to a video you will want to download so you can see how to replace the touch pad.

http://www.appliancerepairlesson.com/shop/dishwasher-videos/control-repair-whirlpoolkitchenaidkenmoremaytagjenn-air-amana-dishwashers/

Good Luck

Haier ESD400... | Answered on Jan 18, 2013

0 Answers

Haier dishwasher esd400 no lights work doesn't come on

Haier ESD400... | Posted on Aug 30, 2012 | Be the first to answer

2 Answers

Haier dishwasher wont run and shows a code OP

Did you every get your this problem solved? I am having the exact same problem

Haier ESD400... | Answered on Jan 20, 2011

1 Answer

Settings buttons partially work and will not start

Basically, the Haier is a piece of ****. Parts are not available and the phone-in service (if you can call it that) will keep you on hold endlessly. Do yourself a favor and get a better machine.

Haier ESD400... | Answered on Dec 01, 2010

1 Answer

Where is the best place online to get Haier

http://www.haier.com/products/more.asp?epcID=6
Follow the ;inks on their global web page....cheers.

Haier ESD400... | Answered on Jul 26, 2010

1 Answer

Haier buttons not working!

From previous experience, I would bet that the circuit board/ control panel is failing. The one I had leaked steam near the top of the unit and the condensation will work it's way into the top control panel. Bad design on Haier's part. The worst part about mine was there is no adjustment for the door. I ended up getting a refund on the unit and buying a very nice LG model. Good luck dealing with Haier. They will send A&E factory Service out and they are not very good. I would suggest getting rid of the Haier. (personal opinion)

Haier ESD400... | Answered on Feb 09, 2010

1 Answer

ESD402 HAIER DISHWASHER IS BLINKING

Hello,

Thank You for contacting Fixya.com

There are some common reasons for this type of behavior shown by the dishwasher:

Power from the house Is there power getting to the dishwasher? This can be difficult to test, because dishwashers are usually wired directly to an electrical circuit, rather than plugged into the wall. But at least check for a blown fuse or a tripped circuit breaker.

Door switch The door switch is important because, if it's defective, the dishwasher won't work at all. To reach it, you need to remove the control panel cover, or sometimes the interior liner of the door. If it's defective, you need to completely replace it.

Wiring Often the main wiring connection from the house, at the dishwasher, burns and breaks the connection. If that's the problem, the wires must be repaired/replaced as necessary. If that's not the problem, check the wiring to the door switch, the wiring between the door and the lower part of the dishwasher, and the wiring to the timer. Repair any broken, burned, brittle, or defective wiring, using the proper appliance-grade wire and connectors.

Timer or selector switch Although it's uncommon, the timer or the selector switch may be defective. If so, you need to replace the defective part, because neither of these can be repaired.

Best of luck and God Bless.

Please let us know if you have any other queuery.

Haier ESD400... | Answered on Jul 21, 2009

1 Answer

Where is the back fuse located at in a Haier esd400?

Here's the service technicians manual: http://service.haieramerica.com/documents/DW-8888-26.pdf

Here's the user's manual: http://service.haieramerica.com/documents/user%20manual%20esd400.pdf

Haier ESD400... | Answered on May 27, 2009

1 Answer

I have a haier hpf12xhm-lp, but I don't have the owner manual. I want to know if it's possible to attach a permanent pvc hose to the bottom drain plug and let it constantly drain.

user manual
https://www.manualslib.com/manual/548406/Haier-Hpn12xhm.html

https://www.haierappliances.com/support/manuals

Haier... | Answered on May 17, 2020

0 Answers

How do you get the child lock off on a Haier dishwasher?

Haier... | Posted on Jul 24, 2019 | Be the first to answer

0 Answers

My haier dishwasher is beeping E30

Haier... | Posted on Jul 20, 2019 | Be the first to answer

1 Answer

Haier dishwasher thermal fuse location

check out this site. they have the fuses and some videos on how to test and replace which will tell you where it is
https://www.repairclinic.com/Shop-For-Parts/b198c44/Haier-Fuse-Thermal-Fuse-Breaker-Parts

Haier... | Answered on May 27, 2019

1 Answer

My Haier Dishwasher HDW100WHT is pumping water over the floor .The door is firmly closed. Any Suggestions please?

OK. When you see water on the floor, and you open the door, is there any water rising in the wash chamber and breaching the seal? If you open the door and do not see any water other than the water dripping off the dishes or whatever, I would suspect there's a leak underneath. If you see water standing in there, they you will want to clean the food/debris trap. Refer to your manual, if you have one. If the food trap is cleared and the water is still comin out, I would suspect a leak underneath the unit, possibly a loose water hose or drain hose.

Haier... | Answered on Apr 27, 2019

1 Answer